Tender For Special Repairs To Sluice No.7 In Uthiramerur Tank In Uthiramerur Taluk Of Kancheepuram District.
Tender Value
24.26 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
8 days left
EMD
24300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanchipuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Sluice No.7 In Uthiramerur Tank In Uthiramerur Taluk Of Kancheepuram District.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in all soils except hard rock requiring blasting and conveying for formation of bund with lead of 0 to 100m deploying earth moving machinery and tippers including benching, formation of bunds, breaking clods, sectioning etc. complete complying with standard specifications and as directed by the Departmental Officers. |
| 2 | Dismantling, clearing away and carefully stacking materials useful for reuse for any thickness of Brick or stone masonary in cement mortar walls under 3m high etc., complete complying with standard specifications and as directed by the departmental officers. |
| 3 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Plain cement concrete etc., complete complying with standard specifications and as directed by the departmental officers |
| 4 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Cut Stone Slabs/ RCC Cover Slabs etc., complete complying with standard specifications and as directed by the departmental officers |
| 5 | Earth work excavation for foundation in all soil and sub soils and to full depth as may be directed by the departmental officicers except hard rock requiring, blasting, including shoring strutting and baling out water wherever necessary and refilling the sides of foundation with excavated soil including all lead and lifts etc.complete complying with standard specifications and as directed by the Departmental Officers. |
| 6 | Providing and placing in position of Plain Cement Concrete M 15 grade using well graded coarse hard blue granite broken stone jelly of 60% of 40 mm size and 40% of 20 mm size mixing with mixer machine and laying in layers of not exceeding 15 cm thick excluding form works, centering, shuttering and Steel Fabrications, including bailing out of water if found necessary, compacting, consolidation finishing, watering, curing etc,complete complying with standard specifications and as directed by the departmental officers.PCC M15-without vibrator for Foundation |
| 7 | PCC M15-with vibrator For above Foundation |
| 8 | Supplying and erecting centering for Vertical plain / RCC Concrete wall sides and soffits and strutting for vertical surfaces such as RCC works etc, with all cross bracing with mild steel size of 90 cm x 60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x 25 mm x 3 mm for bearing laid silver Oak / Country wood joist of size 10 cm x 6.5 cm spaced @ about 90 cm C / C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C / C and removing the same without any damages etc., complete complying with standard specifications and as directed by the departmental officers. For Vertical Surfaces upto 3.00 m Height |
| 9 | For Vertical Surfaces 3.00 m to 4.00 m Height |
| 10 | For Vertical Surfaces 4.00 m to 5.00 m Height |
| 11 | For Vertical Surfaces 5.00 m to 6.00 m Height |
| 12 | For Vertical Surfaces 6.00 m to 7.00 m Height |
| 13 | Re-fixing of old available cut stone slab / RCC Cover Slab set in cement mortar 1:4 (One part of Cement and Four Parts of M-sand) etc., complete complying with standard specifications and as directed by the departmental officers |
| 14 | Gravel backing for revetment in layers not exceeding 15cm thick including stacking for premeasurement, watering, consolidation and trimming the top surface so as to receive the rough stones, etc., complete complying with standard specifications and as directed by the Departmental Officers. |
| 15 | Rough stone dry packing for apron and revetment using new rough stones including stacking the same, the cost of new wedges for filling the gaps etc., complete complying with standard specification and as directed by the departmental officers. |
| 16 | Refilling with excavated soil (Other than Sand) in layers of not more than 15cm thick well watered, rammed and consolidatin by using power roller including extra watering and power roller consolidation, etc., complete complying with standard specifications and as directed by the departmental officers |
| 17 | Fabricating, supplying and erection of Screw Gearing Steel Shutters of size above 1.00m and up to 2.00m width consist of skin plate made out of 8mm thick Mild Steel plate and horizontally stiffened with 100x50mm mild steel channel (ISMC) at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm thick Mild Steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipments. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipments. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red oxide primer. The rate including cost of materials, consumables, labours, power charges, conveyance charges, charges for all equipments required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc., complete complying with standard specifications and as directed by the departmental officers. |
| 18 | Fabricating supplying and fixing of shutter Groove Angle made up of 100 x 100 x 10mm Mild Steel angle for required height including welding hold fast of size 40 x 40 x 6mm Mild steel angle 3 Nos on both sides and conveying and leading the groove angle to the vents. Fixing the angle to the grooves in proper alignment including dismantling the existing damaged groove angles, conveying and stacking at section store. The Groove angle should be painted with two coats of Anticorrosive black paint over one coat of red oxide primer. The rate including cost of materials, consumables, labours, charges for all fabricating and hoisting equipments, conveyance, petty civil works and warranty for 5 years etc., complete complying with standard specifications and as directed by the departmental officers. |
| 19 | Fabricating supplying and fixing of shutter Groove Angle made up of 100 x 100 x 10mm Mild Steel angle for required height including welding hold fast of size 40 x 40 x 6mm Mild steel angle 3 Nos on both sides and conveying and leading the groove angle to the vents. Fixing the angle to the grooves in proper alignment including dismantling the existing damaged groove angles, conveying and stacking at section store. The Groove angle should be painted with two coats of Anticorrosive black paint over one coat of red oxide primer. The rate including cost of materials, consumables, labours, charges for all fabricating and hoisting equipments, conveyance, petty civil works and warranty for 5 years etc., complete complying with standard specifications and as directed by the departmental officers. |
| 20 | Fabricating, Supplying and fixing of Head Set Assembly medium duty (approximate 70 Kg) consist of the bottom and top portions made up of cast iron including moulding, machining and the hexagonal nut made up of gunmetal threaded to suit the Screw Rod provided with thrust bearings for smooth operation. Conveying and leading the head set assembly to the work site. Fixing the head set assembly to the top beam by using required rust free bolts and nuts in proper alignment including dismantling the existing damaged Head set assembly, conveying and stacking at section store. The Head set assembly supplied with operating key and the both should be painted with two coats of Anti Corrosive black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for wooden pattern, moulding and charges for all machining equipments, conveyance charges for labours and materials and warranty for 5 years etc., complete complying with standard specifications and as directed by the departmental officers. |
| 21 | Fabricating, Supplying and fixing of Top Beam made out of 200 x 100mm (ISMB 200) duly drilled to suit the Head set Assembly with required bed bolt made out of 25mm Mild Steel Round duly threaded with suitable anchorage arrangements to a height of 0.60 m with necessary Fish plate made out of 16 mm Mild Steel Plate of size 0.20 x 0.30m 2 Nos. with required holes. Conveying and leading the top beam arrangements to the work site. Fixing the top beam arrangements at the top of the vent to correct position including dismantling the existing eroded top beam, conveying and stacking at the section store. The top beam should be painted with two coat of Anticorrosive black paint over one coat of Red Oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, cost of petty civil work, conveyance charges for labours and materials and warranty for 5 years etc complete complying with standard specifications and as directed by the departmental officers. |
| 22 | GST 18% in Figures Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender