Tender For Balance Work Construction Of Sports Hostel Block At Govt Sr,Sec,School Rohru Distt. Shimla Hp.(Sh: construction of Civil Work Including Ws & Si Ws & Si. , Rain Water Harvesting Tank,Septic Tank & Site Development Etc.)
Tender Value
2.57 Crore
Estimated cost
Bid Submission
27 Aug 2026
4 days left
EMD
5.15 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balance Work Construction Of Sports Hostel Block At Govt Sr,Sec,School Rohru Distt. Shimla Hp.(Sh: construction of Civil Work Including Ws & Si Ws & Si. , Rain Water Harvesting Tank,Septic Tank & Site Development Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means manual means in foundation trenches or drain up to all depth, including dressing of sides and ramming of bopttoms, including getting out the excavated soil and disposal of surplus excavated soil up to dumping site which will be arranged by the contractor himself at his own cost including carriage in all leads and lifts by mechanical or manual means. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) manual means in foundation trenches of drain (not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottom upto 1.5 including getting out the excavated soil and disposal of surplus excavated soil as directed with in lead of 50m . |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of materials in all leads and lifts by mechanical means or manual means. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :- In C.Conc.1:4:8 (one Cement : four coarse sand : eight graded stone aggregate forty milimetre nominal size) upto all height/ lift including carriage of materials in all leads and lifts. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for upto all floor levels including carriage of materials in all leads and lifts by mechanical means or manual means.(iv) Lintels, beams, plinth beams, girders,bressumers and cantilevers. |
| 6 | (v) Columns, Pillars, Piers, Abutments, Post and struts. |
| 7 | (vi)Stairs, (excluding landings) except spiral-staircases. |
| 8 | (vii) Edges of slabs and breaks in floors and walls.(a) Under 20 cm wide |
| 9 | (viii) Small lintels of any span,moulding as in cornices,window sills, string courses, bands, copings, bed plates, anchor blocks and the like. |
| 10 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of materials in all leads and lifts. . |
| 11 | Centring and shuttering including strutting propping etc and removal of from for:- (i) Suspended floors, roofs , landings , balconies and access platform . |
| 12 | (ii) Vertical surface such as weell any thickness |
| 13 | (iii) Edges of slabs and break in floors and walls :-i)Under 20cm wide |
| 14 | Providing and laying cement concrete work 1:4:8 ( 1 cement :4 sand : 8 graded stone aggregate 20mm nominal size ) in all leads and lifts:- (i) Foundation and plinth |
| 15 | Providing and laying cement concrete work 1:1 1/2 :3 ( 1 cement : 1 1/2 sand :3 graded stone aggregate 20mm nominal size) in all leads and lifts:-(a) Suspended floors, roofs landing and shelves and their support, balconies , beams, girders, bressumers and cantilever. |
| 16 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including carrage of materials in all leads and lifts by mechnical or manual means. |
| 17 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor levels, excluding the cost of centering,shuttering, finishing and reinforcement 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including carrage of materials in all leads and lifts by mechnical or manual means. |
| 18 | Steel reinforcement for R.C.C. work including straightening cutting, bending, placing in position and bindig all complete including cost of binding wires etc. upto all floor levels including carriage of materials in all leads and lifts. (i) Thermo-Mechanically Treated bars of grade i.Fe-500D or more |
| 19 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in :- foundation and plinth in:(i) Cement mortar 1:6 ( one cement : six coarse sand) including carriage of materials in all leads and lifts. |
| 20 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto all floor levels including carriage of materials in all leads and lifts.(i) In Cement mortar 1:4 (one cement : four coarse sand) |
| 21 | Providing and fixing 1st quality ceramic glazed wall tiles of size 30x45 cm confrming to IS: 15622 (thickness to be specified by the maufacture )of approved make ,in all colour ,shade except burgundy ,bottle green ,black of any size as approved by Engnieer - in -charge in skirting ,risers of steps and dedos ,over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carrage of material in all leades and lifts by mechanical or manual means. |
| 22 | Providing and fixing panelled or panelled and glazed shutter for doors ,windows and clearestory windows including ISI marked M.S pressed butt hinges bright finished of requred size with necessary screws ,excluding panelling which will be paid for separately ,all complete as per the direction of Engineer - in- charge. (Note:- Butt hinges and necessary screws shall be paid separately) including carrage of materials in all leads and lifts by machanical or manual means. (i) Second class Deodar wood (i) 37.5 mm thick shutters. |
| 23 | Providing and fixing ISI marked Factory made Flush Doors shutter of Commercial board i.e non decorative Phenol bonded termite resistant & water proof core of block board construction with full frame of first class hard wood and well match of flush door shutters conforming to Alpro / Century I.S.I marked IS : 2202 (Part I)to be painted (i) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of materials in all leads and lifts. |
| 24 | Providing and fixing steel wire guage shutter using galvainsed MS wire gauge of IS gauge desination 85kg with wire of dia 0.55mm for doors, windows and clearestory windows including bright finished black enameled iron hinges with neccesary screws 35mm thick 2nd class deodar wood with in all leads and lifts as per approved specification / design. |
| 25 | Providing and fixing ISI marked Factory made Flush Doors shutter 35 mm thick (commercial Board ) conforming to IS : 2202 (PART1) non decorative Phenol bonded termite resistant & water proof core of block board construction with full frame of first class hard wood and well matched commercial three ply veneer with vertical grains or cross andof Centuary ply board Ltd/Kit Ply/Green ply or its equivalent as per Arch. drawing including carriage of materials in all leads and lifts by mechanical or manual means. (i)25mm thick (for cup board)including ISI marked Stainless Steel butt hinges with necessary screws. |
| 26 | Providing and fixing ISI marked flush door shutter conforming to IS:2202 (part1) non decorative type ,core of block board construction with frame of 1st classhard wood and wall machad commercial 3 ply veneering with vertical grains or cross bands and face veneers on front side and 060 mm thick PGI sheet lining or inner side of shutter including carrage of material in all leads and lifts by mechanical or manual means. (i) 25mm thick including ISI marked nicklel plated bright finished M.S piano himnges with necessary screws. |
| 27 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc.welded to M.S frame complete including carriage of material in all lead and lifts by mechnical or manual means.(i) 125x64x1.9 mm |
| 28 | (ii) 100x58x1.9 mm |
| 29 | (iii) 75x47x1.8 mm (window +vent) |
| 30 | Providing and fixing nickel plated M.S pipe curtain roads with nickel plated brackets including carrage of material in all leads and lifts by mechanical or manual means. (i)20 mm dia (heavy type) |
| 31 | Providing and fixing 12 mm thick &80cm wide 1st class Raiwood border in cilling fixed over iron or wood frame work which shall be paid for seprately as per Architectural drawing complete fixed with steel fastener at all heights and floor levels as per the direction of Engineer-in-charge at all celling heights and floor levels. |
| 32 | Providing and fixing Wood wool Tile of approved thickness in panelling over wooden frames work 35x50 mm @60 cm c/c horizontly and vertically up tp 250 cm height with cornice of size 75x50 mm fixed with fastners / self screws or as directed by the Engineer at all heights and floor levels complete in all respect including carraige of materials in all lead and lifts . (wood frame work and cornice will be paid for seperately) |
| 33 | Providing and fixing Teak 1st class hard wood cornice of size 75x50 mm size fixed over wool tile panelling as per arch. Drawing fixed in steel self screws as per the direction of Engineer -in-charge at all heights and floor levels including carrage of materials in all lead and lifts. |
| 34 | Providing and fixing aluminum powder coated sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of materials in all leads and lifts. (i) 300x16 mm |
| 35 | (ii) 250x16 mm |
| 36 | Providing and fixing aluminum tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :(i) 200x10 mm |
| 37 | (ii) 100x10 mm |
| 38 | Providing and Fixing bright finished brass hasp and staple (Saftey type) with necessary screws etc. complete including carriage of materials in all leads and lifts by mechanical or manual means . |
| 39 | Providing and fixing oxidised m.s double acting spring hinges with necessary screws etc. Complete including carriage of Materials in all leads and lifts by mechanical or manual means . |
| 40 | Providing and fixing aluminum handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete(i) 125mm |
| 41 | 100MM |
| 42 | Providing and fixing aluminium casement stays ISI marked ,anodised (anodic coating not less thengrade AC 10as oer IS:1868)transparent or dyed to requre colour and shade, eith necessary screws etc. Complete including carrage of materials in all lead and lifts by mechanical or manaul means. |
| 43 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodi-zed (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 44 | Providing and fixing magnetic catcher (M-15) including carriage of materials within all leads and lifts. |
| 45 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. |
| 46 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) including carriage of materials in all leads and lifts. |
| 47 | Providing and fixing flat pressed commercial ply exterior grade(Grade 1)or grade wood particle board IS : 3087 marked lining to frame ,backing or studding with screws etc. Complete (frames, backing or studding to be paid seprately ) 6 mm thick including carrage of materials in all leads and lifts by mechnacial or manual means. |
| 48 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position including carriage of materials in all leads and lifts : (i) Kail wood |
| 49 | Providing and fixing 19mm thick water proof commercial kit ply (gold) board or equivalent in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 50 | Providing and fixing 2nd class teak wood lipping/moulded beading or taj beading of size 19x5 mm fixed with wooden adhesive of approved quality and screws/nail on the edge of the Pre-laminated partical board as per the direction of Engineer-in-charge including carrage of materials in all leads and lifts by mechnacial or manual means. |
| 51 | structural steel in single section welded and fixed with or without connecting plates such as door ,windows chowkhats etc. and the like, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carrage of materials in all leads and lifts by mechnacial or manual means. |
| 52 | Providing and fixing glass panes with putty and glasing clips in steel door windows , all complete with : (i)4 mm thick glass panes (double glass) including carriage of materials in all leads and lifts by mechanical or manual means. |
| 53 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including carriage of materials in all leads and lifts by mechanical or manual means. |
| 54 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including carriage including carriage of materials in all leads and lifts by mechanical or manual means. |
| 55 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required upto all floor levels including carriage including carriage of materials in all leads and lifts by mechanical or manual means.(a)In gratings,frames, guard bar ,ladder, ralling, brackets, gates and similar works. |
| 56 | Providing and fixing 10cm dia M.S post embeded in cement concrte base with MS flat in base ( Cement concrete will be paid for separately) including carriage of materials in all leads and lifts by mechanical or manual means. |
| 57 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 58 | Providing and fixing ball bearing for rolling shutters. |
| 59 | Providing and fixing 50 mm x50 mm section hand rail round end at two levels as per Architectural drawing complete of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 60 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.(i) Fixed to steel windows by welding |
| 61 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. |
| 62 | Providing and fixing 75 75 cm size Ornamental M.S brackets made of 50 x50 & 20x 20 mm hollow section dully welded or rivtted in combination as per Architectural detail / drawing complete in all respect dully fixed with welded or self screws/ fastners in wall etc as required and applying of two coat of red lead paint as directed by the Engineer-in Charge at all height and all floor levels including carriage of materials in all leads and lifts by mechnical or manua lmeans. |
| 63 | Providing and laying precast cement concrte pavers 40mm thick laid over a bed of cement mortar 1:4 (one cement :4 sand ) 25 mm thick laid in floors, jointed with neat cement slurry mixed with pigment to match the shade of the pavers as per detail of Arch. drg complete in all respect including carriage of materials in all leads and lifts by mechnical or manual means. |
| 64 | Providing and laying precast cement concrte pavers 25mm thick of Nitco or equivelents factory make laid over a bed of cemrnt mortar 1:4 (one cement :4 sand ) 25 mm thick laid floors, jointed with neat cement slurry mixed with pigment to match the shade of the pavers as per detail of Arch. drg. complete including carriage of materials in all leads and lifts by mechanical or manual means. |
| 65 | Kota stone slab flooring 55cmx55 cm of uniform colour in combination with white as per approved Architectural drawing Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including carriage of materials up to all leads and lifts : (i) 19 mm thick. |
| 66 | Providing and laying Polished Kota stone in skirting and dado, in linear as well as curvilinear portions of the building all complete as per the Architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:3(one cement : three coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge up all floor levels including carriage of materials in all leads and lifts.(i) 20 mm thick. |
| 67 | Providing and laying 19 mm ( nineteen milimetres) thick rough finished Kota ( 80% polished & 20% unpolished) in Treads , with 5 cm ( five centimetres) wide flaming band near nosing and fully polished in Risers of approved shade and sample in full length of treads & risers ( in single piece) of Kota stone as per required size, and as per approved Architectural drawing over 20 mm (average) thick base of cement mortar 1:4(one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts. |
| 68 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.(i) Green marble/ Zebra black marble |
| 69 | Providing opening of required size & shape for wash basin/ kitchen sink in Kitchen platform, vanity counter and similar location in marble /Granite/ tone work, including necessary holes for pillar tap[s etc. including moulding , rubbing and polishing of cut edges . |
| 70 | Provindg and fixing 18 mm thick White Marble having grey streaks saw cut, Mirror polished, premoulded and prepolished ,machine cut for kitchen platforms , vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 Cement :4 coarse sand ), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, Curing, moulding and polishing to edges to give high gloss finish etc. complete at all floor : (a) Raj Nagar Plain white marble /udaipue or equivelent. |
| 71 | Cement concrete florring 1:2:4 (1Cement :2 coarse sand :4 graded stone aggregate ) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. Complete including carriage of materials in all leads and lifts by mechanical or manual means. (i) 40mm thick. |
| 72 | Providing and fixing 3.9 mm thick Tera Flex Flooring of approved shade of GENFLOR over Cement concrete flooring as per Approved Architectural Drawing/ required specifications complete at all floor levels including carriage of materials in all leads and lifts by mechanical or manual means . |
| 73 | Providing and fixing 0.60mm thick preprinted steel sheet (TATA Durashine) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20microns over 5microns primer coating to back coat of polyester of 5microns over 5microns primer coating including fixing with self drilling screws complete with preprinted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials up to all leads and lifts. |
| 74 | Providing and fixing Factory made ridges or hips ornamental or plain as per approved Architect Drawing, of width 60 cm overall width plain Prepainted G.S. sheet ( Tata Duroshine) fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m² white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts. |
| 75 | Providing and fixing of 90 cm overall width valley plain Pre-painted G.S. sheet of Tata make or its equivlent fixed with polymer coated J or L hooks, bolts and nuts, G.l. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse sand). 1.00 mm thick with zinc coating not less than 275 gm/m² including carriage of materials up to all leads and lifts. |
| 76 | Providing and fixing pre-painted plain steel sheet (TATA MAKE or its equivlent as approved by the Engineer) fixing 30 cm wide, 30 cm deep overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers or self drilling screws etc., including making necessary connections with rain water pipes complete up all heights/ level including cost of scafolding and carriage of materials in all leads and lifts.(a) 0.60 mm thick with zinc coating sheet with top coat of regular modified polyster (RMP) organic coating of 20 microns primer of 20 micron over microns pruner+ back coat of polyster of 5 microns primer coating including carriage of materials up to all leads and lifts. |
| 77 | Providing and fixing MS BP sheet 2.00 mm thick in eves board /fascia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge ( base members of steel work shall be measured and paid separately ) including carriage of materials up to all leads and lifts. |
| 78 | Providing 2.00 M.S sheet ceiling , soffits of chhajas and facia welded over angle/ T -iron 25x25x5mm or as directed by the Engineer complete also applying red lead primer two coats with iron screws or as per drawing in all respect up to all floor levels including carriage of materials in all leads and lifts by mechnical or manual means. (frame work will be paid for separately ). |
| 79 | Providing and fixing of 38cm overall width plain G.S prepainted shett Flushing of TATA make or its equivelent as approved by the Engineer fixed with polymer coated J or L hooks, bolts and nuts, G.I limpet and bitumen washer complete ,or with self screws bent to sand ) including carriage of materials in all leads and lifts by mechanical or manual means. |
| 80 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc.including carriage of materials in all leads and lifts.: (i) (i) 7.5cm x 7.5 cm. |
| 81 | (ii)7.5 cm x 12 cm. |
| 82 | Providing and fixing on wall face M.S hollow pipe for rain water pipes including accesories ,bends etc. if reuired and jointing , welding etc.:-(i) 7.5cm x 7.5 cm. |
| 83 | (ii)7.5 cm x 12 cm. |
| 84 | Shoe (i) 7.5cm x 7.5 cm. |
| 85 | (ii)7.5 cm x 12 cm. |
| 86 | Providing lead caulked joints to sand cast iron /M.S rain water pipes and fittings including carriage of materials in all leads and lifts by mechnical or manual means. (a) 7.5 cmx7.5m |
| 87 | (b) 7.5cmx12cm |
| 88 | Providing and fixing AEROLITE Armstrong Tiles of size 60x60 cm, 50% fully preforated & 50 % plain tiles in combination over powder coated G.I frame work as per pattern with 12mm thick & 80 cm wide Rai wood border . (Rai wood border will be paid separtely ) including carriage of materials in all leads and lifts by mechnical or manual means. |
| 89 | Providing and fixing Everest Fibre Cement Board 6 mm thick Ceiling including frame Grid system ( G.I Angle and T- sections) complete in all respect at all floor levels and heights including carriage of materials in all leads and lifts. |
| 90 | 6 mm Plaster in Ceiling 1:3 (1 cement : 3 fine sand) upto all floor levels and heights including carriage of materials in all leads and lifts. |
| 91 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) with 15 cm wide plaster bands as per Architectural drawing. |
| 92 | 15 mm cement plaster on the Fair side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) with 15 cm wide plaster bands as per Architectural drawing. |
| 93 | 15 mm cement plaster in pattern on the rough side on brick wall of mix :1:4 (1 cement: 4 fine sand) with plaster bands / designs as per Architectural drawing upto all floor levels and heights including carriage of materials in all leads and lifts. |
| 94 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Two coats or as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts. |
| 95 | Distempering with Acrylic oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer upto all floor levels and heights including carriage of materials in all leads and lifts. |
| 96 | Finishing walls with 100% Premium acrylic emulsion Apex paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 liter/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 liter/10 sqm (Circulation area) |
| 97 | Finshing walls with Premium Acrylic Smooth exterior weather proof paint (Apex ultima) with Silicone additives of required shade including carriage of materials in all leads and lifts by mechnical or manual means: (a) New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat exterior pimer applied @ 0.90 litre /10 sqm . |
| 98 | Finshing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications incuding carriage of materials in all leads and lifts by mechanical or manual means.: (i) Painting Steel work with Deluxe Multi surface paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including carriage of materials in all leads and lifts by mechnical or manual means . |
| 99 | Applying priming coat : (i) with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood ) including carriage of materials in all leads and lifts by mechnical or manual means . |
| 100 | Painting wood work with Deluxe Multi Surface paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10sqm of approved brand and manufacture including carriage of materials in all leads and lifts by mechnical or manual means. |
| 101 | French sprit polishing on new wood work (Two or more coats on new works including a coat of wood filler )of approved brand and manufacturere complete in all respect all heghts and floor levels including carriage of materials in all leads and lifts by mechnical or manual means. |
| 102 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 75 mm to /150 mm dia PVC pipes conforming BIS- 12818 and making good the same etc. complete as per direction of Engineer-in -charge including carriage of materials in all leads and lifts by mechnical or manual means. |
| 103 | Providing and laying APP (Atactic Polypropylenene polyyment) modified prefabricated five layer, 3 mm (three millmeter) thick matt consisting a coat of bitumen primer for bitumen membrane at 25 @ 0.40 litre /sqm (zero point four zero litre per squere meter ) waterproofing membrane, black finished reinforced with glass fibre |0.87-0.89 kg (zero point wight seven - zero point eight nine hundered sixy ) over the primer coat the layer of membrane shall be |laid using butane torch and sealling all joints etc. and prparing the surface complete. The vital phyical and chemical parameters of the |kilogrammer per litre ) and viscocity 70-160 cps (seventy one transverse direction at 23 asn/5 cm (three hundred fifty three |hundred n / five centimentre) softening point of membrane membrane shall be as under. Joints strength in in longitudinal and that 150 c (onehundred fifty degree celsus) cold fixibilishall be upto. |2 c (minus two degree celsius) when tesed in accoring with ASTM. D 5147 (Five thousand one hundred forty seven ). The laying of membrane shall be got done through the authorised applicator of |the manufacture of membrane () 3 m.m (three milimeter ) thick.including carriage of material upto all leads and lifts also and as per the direction of Engineer-in-charge. |
| 104 | Providing and in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level 1:5:10 (1 cement :5 coarse sand ): 10 graded stone aggregate 40mm nominal size including carriage of materials in all leads and lifts by mechanical or manual means. |
| 105 | Providing & laying cement concrte in retaning walls, return wass, walls (any thickness ) including attached pilasters, columns, piers, abutments , pillars , posts , strurs, butteresses, string or lacing course , parapets, coping ,bed blocks, anchor blocks , plain windows sills , fillets , sunken floor etc. upto floor five irvel, excluding the cost of centring , shuttering & finshing 1:3:6 ( one cement : three coarse sand : six graded stone aggregate 20mm nominal size ), including all leads , lift & carriage of material & to the entire satification of the Engineer- in - charge . |
| 106 | Cetring & Shuttering including strutting, propping etc. & removal of form work for retaining walls,walls (any thickness) including attached pilasters, buttresses, plinth & string course fillets,kerbs & step etc. including all leads , lifts & carriage of material & to the entire satification of the Engineer -in Charge. |
| 107 | Brick work with common burnt clay F.P.S (non modular) bricks of class desingnation 7.5 in foumdation & plinth in : Cemnt mortar 1:6 (I cement :6 coarse sand including carriage of materals in all leads and lift by mechnical or manual means ,including all leads ,lift &carraige of material & the entire satification of the Engineer-in- charge |
| 108 | 15mm cement plaster on the rough side of single or half brick wall of mix in cement mortar 1:6 (1 Cement :6 coarse sand ) including carriage of materials in all leads and lifts by mechnical or manual means , including all leads,ligt & carriage of material & to the entire satification of the Wngineer-in charge. |
| 109 | Centering and shuttering including strutting, propping etc. and removal of form for upto all floor levels including carriage of materials in all leads and lifts by mechanical means or manual means. |
| 110 | (a) Flat surfaces such as soffit of suspended floors, roofs landing and the like. |
| 111 | Providing and laying cement concrete weork 1:5:10 (one cement : five coarse sand : ten graded stone aggregate forty milimetre nominal Size) in all leads and lifts.(i) In foundation and plinth |
| 112 | Providing and laying cement concrate , 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including carrage of materials in all leads and lifts by mechnical or manual means.(i) Suspended floors, roofs landing and shelves and their support, balconies,beams, girders, bressumers and cantilever. |
| 113 | Steel reinforcement for R.C.C work including straightening cutting , bending , placing in position and bindig all complete above plinth level (i) Thermo-Mechanically treated bars of grade i.Fe-500 or more including carriage of materials in all leads and lifts by mechanical or manual means. |
| 114 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement :6 coarse sand :12 graded stone aggregate 20mm nominal ) upto plinth level with :(i) Cement mortar 1:6 (1 Cement : 6 coarse sand ) |
| 115 | 2015 mm thick cement plaster of mix : (i) 1:4 (I cement :4 coarse sand ) |
| 116 | Supplying and fixing 455x 610 mm cast iron cover without frame |
| 117 | Steel reinforcement for R.C.C work including straightening cutting, bending , placing in position and bindig all complete all complete above plinth leve (i) thermo-mechanically treated bars of grade i.Fe-500D or more including carriage of materials in all leads and lifts by machanical or manual means . |
| 118 | Brick work with common burnt clay half brick masonry F.P.S (Not modular) brick or class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and size in ; Cement mortar 1:4 (1cement : 4 coarse sand). |
| 119 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement : 6 coarse sans : 12 graded stone aggregate 20 mm nominal size ) upto plinth level with : (i) cement mortar 1:6 (1 cement : 6 coaese sand) |
| 120 | cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)(1) 40 mm thick. |
| 121 | 15 mm thick cement plaster of mix : (i) 1:4 (1 cement : 4 coarse sand ). |
| 122 | Proving and fixing high pressure PVC spigot and socket waste and ventilating pipe 110 mm dia |
| 123 | Providing and fixing PVC cowel 110 mm dia . |
| 124 | Supplying and fixing 455 x 610 mm cast iron cover without frame. |
| 125 | Making connection of G.I Distribution branch with G.I main of Following sizes by Providing and fixing tee, including cutting and threading the pipe etc. Complete including carriage of materials in all leads and lifts by mechanicals or manual means. (i) 25 to 40mm nominal bore |
| 126 | Fixing water meter nad stop cock in G.I pipe line including cutting and threading the pipe nad making long screws etc. Completet (cost of water meter and stop cock to be paid separately) including including carriage of materials in all leads and lifts by mechanicals or manual means. |
| 127 | Providing and fixing G.I pipes complete with G.I fitting including trenching and refilling etc. including carriage of materials in all leads and lifts by mechanicals or manual means. (i) External work. (i) 25mm dia nominal bore |
| 128 | Providing and fixing G.I pipes complete with G.I fitting and clamps i/c cutting and making good the wall etc. Internal work Exposed on wall . including carriage of materials in all leads and lifts by mechanicals or manual means. (i) 25 dia nominal bore. |
| 129 | Providing and fixing G.I pipes complete with G.I fitting and clamps i/c making good the wall etc. Concealed piope including painting with anti corrosive bitumastic paint ,cutting chase and making good the wall including carriage of materials in all leads and lifts by mechanicals or manual means. (ii) 15mm nominal bore |
| 130 | Providing and fixing chromium plate brass ISI marked IS No. 8934 of JAL/ESS make bib cock of approved quality including carriage of materials in all leads and lifts by mechanicals or manual means. (i) 15 mm nominal bore |
| 131 | Providing and fixing brass ISI marked IS No. 8934 of JAL/ESS ESS Stop cock of Approved quality 15mm nominal bore including carriage of materials in all leads and lifts by mechanicals or manual means. |
| 132 | Providing and fixing brass ISI marked IS No. 8934 of JAL/ESS angle vavle for basin mixer and geyser point of approved quality conforming to IS 8931 including carriage of materials in all leads and lifts by mechanicals or manual means. (i) 15mm nominal bore . |
| 133 | P/f c.p brass extension nipple (size 15mmx 50mm) o0f approved make and quality as per direction of Engineer in charge including carriage of materials in all leads and lifts by mechanicals or manual means. |
| 134 | P/F PTMT ball cock of approved quality colour and making complete with epoxy aluminium rod with L.P /H.P.H.D plastic ball , 25mm nominal bore , 152 mm long , weighing not less than 440gms including carriage of materials in all leads and lifts by mechanicals or manual means. |
| 135 | P/F gun metal gate valve with C.I Wheel of approved quality (Screwed end) including carriage of materials in all leads and lifts by mechanicals or manual means. 15mm nominal bore. |
| 136 | P/F uplasticised PVC connection pipe with brass union including carriage of materials in all leads and lifts by mechanicals or manual means. 15mm nominal bore 45cm length. |
| 137 | P/F PVC waste pipe for sink or wash basin including PVC waste fitting complete including carriage of materials in all leads and lifts by mechanicals or manual means. |
| 138 | Constructing masonary chamber 60x60x75cm inside , in brick work in cement mortar 1:4 (1 cement : 4 coarse sand ) for sluice valve , with C.I surface box 100mm top Diameter , 160mm bottom diameter and 180mm deep (inside ) with chained lid and RCC top slab 1:2:4 mix(1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), i/c neccesary exacavation ,foundation concrete 1:5:10(1 cement :5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand ) 12mm thick , finished with a floating coat of neat cement complete as per standred degine (i) with common burnt clay F.P.S (non modular) bricks of class desiganation 7.5 including carriage of materials in all leads and lifts by mechanicals or manual means. |
| 139 | Constructing masonary chamber 90x90x100cm inside , in brick work in cement mortar 1:4 (1 cement : 4 coarse sand ) for sluice valve , with C.I surface box 100mm top Diameter , 160mm bottom diameter and 180mm deep (inside ) with chained lid and RCC top slab 1:2:4 mix(1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), i/c neccesary exacavation ,foundation concrete 1:5:10(1 cement :5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand ) 12mm thick , finished with a floating coat of neat cement complete as per standred degine (i) with common burnt clay F.P.S (non modular) bricks of class desiganation 7.5 including carriage of materials in all leads and lifts by mechanicals or manual means. |
| 140 | P/F G.I Unoin in G.I pipe including cutting and threading the pipe and making long scews etc. Complete (New work) including carriage of materials in all leads and lifts by mechanicals or manual means. (i) 15mm nominal bore |
| 141 | (ii) 25 mm nominal bore |
| 142 | Providing and placing on terrace ( at all floor level ) PVC water storage tank . IS 12701 marked , Sintex or its equivlent make with cover and suitable locking arrangement and making neccessary holes for inlet, outlet and overflow pipe but withuot fitting and the base support for tank including carriage of materials in all leads and lifts by mechanicals or manual means. |
| 143 | P/F high pressure PVC spigot and socket waste and dventilating pipe 110mm dia . |
| 144 | P/L and jointing half round glazed stoneware pipe class SP-1 with stiff mixture of cement mortar in the proportion of 1:1() 1 cement : 1 fine sand ) including teating of joints etc. Complete including carriage of materials in all leads and lifts by mechanicals or manual means. (i) 200 mm diameter S.W.pipe . |
| 145 | P/L cement concrete 1:5:10 ( 1 cement :5 coarse sand : 10 graded stone aggregate 40 mm nominal size ) all round S.W pipes including bed concrete as per standard design including carriage of materials in all leads and lifts by mechanicals or manual means.(i) 200 mm diameter. S.W pipe |
| 146 | Cutting holes up to 30x30 cm in walls including making good the same with common burnt clay F.P.S (non modular) bricks |
| 147 | Cutting holes up to 15x 15cm in RCC floors and roofs for passing drain pipe etc. And frepairing the hole after insertion of drain pipe etc. With cement concrete 1:2:4 ( 1cement:2 coarse sand : 4 graded stone aggregate 20mm nominal size) including finishing complete bso as to make it leak proof . |
| 148 | Providing and fixing square-mouth S.W gully trap SP-I complete with C.I granting brick masonary chamber with tight C.I cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be less then 2.70 kg as per sdtanderd design (1) 100X100 mm size P type (i) with comon burnt clay F.S.P (non modural) bricks of class |
| 149 | Constructing brick masnorey manhole in cement mortar 1:4 (1cement :4 course sand ) with R.CC top slab 1:1:5:3 mis (1cement:1.5 course sand :3 graded stone aggregate 20mm nominal size0, foundation concrete 1:4:8 mix (1cement :4course :8 graded stone aggregate 40mm niminal size ), insideplastring 12mm thick with mortar 1:3 (1cement :3 course sand) finished with floating coat of neat cenment and makingchannels in cement concrte 1:2:4 (1 cement:2 course sand :4 graded stone aggregate 20mm niminal size ) finished with floating coat neat cement complete as per standred design (i)Inside size 90x80 cm and 45 cm deep including C.I cover with |
| 150 | Constructing soak pit 1.20x1 1.20x1.20 m filled with brick bats including S.W drain pipe 100mm diametre and 1.20 m long complete per standred design including carriage of materials in |
| 151 | Providing and fixing 1.00 horse power water pump of kilosker make or its equivlent as per direction of Engineer-In -Charge to lift rain water including carriage of materials in all leads and |
| 152 | Supplying and fixing contral Panal for pump complete with sheet and angle iron painted with internal wiring, airbreak starter, main switch of main switch ,voltmetre ,ammeter etc |
| 153 | Earth work in excavation by mechnical means manual means in foundation trenches or drains up to all depth, including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil up to dumping site which will be arranged by the contracto himsefl at his own cost including carriage of materials in all leads lifts by meachnical or manual means. |
| 154 | providing and fixing water closet squatting pan (indian type W.C pan ) with 100 mm sand cast iron P. or S trap, 10 litre low level white P.V.C flushing cistern No. 21001 including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231 , with all fittings and fixtures complete , including cutting and making good tha walls and floors wherever required : (i) White Vitreous china Orissa Pattern W.C .Pan No .2071 of size 580x 440mm with integral type foot rests of Cera or Hindware or its equivlent make including carriage of materials in all leads and lifts by meachnical or manual means. |
| 155 | Providing and fixing water closet squatting pan (indian type W.C pan ) with squatting pan or Europen type water closet (Anglo indian W.C pan no 20012 of Cera or Hindware or its equivelent make) with seat & lid fixed with C.P brass hinges and eubber buffers, 10 litre low level flushing cistern No 21001 with fitting and brackets,40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municpal design complete ,including painting of fittings and brackets , cutting and making good the walls and floors wherever required carriage of materials in all leads and lifts by meachnical or manual means. |
| 156 | Providing and fixng white vitreous china pedestal type water closet (Europen type W.C pan of Cera or Hindware or its equivlent make) with seat and lid , 10 litre low level white P.V.C flushing cistern no 21001, including cutting and making good the walls and floors wherever required including carriage of materials in all leads and lifts by meachnical or manual means. |
| 157 | Providing and fixing wash basin C.I brackets ,15 mm dia CP Brass single hole basin mixer of approved qulity and make , including painting of fittings and brackets, cutting and making good the walls wherever required including carriage of materials in all leads and lifts mechanical or manual means. (a) White vitreous China wash basin No 10001 of size 550x400 mm with a 15 mm Cp Brass signle hole mixer of cera hindware or its equivlent make . |
| 158 | Providing and fixing stainless steel double with drain board super Delux No 6321 of Diamond or its eqivelent A ISI 304 (18/8) Kitchen sink as per IS : 13983 with C.I brackets and stainless steel plug 40mm , including painting or fittings and brackets , cutting and making good the wherever required required including carriage of materials in all leads and lifts mechanical or manual means. |
| 159 | Providing and fixing 8mm dia C.P /S>S jet with flexble tube upto 1 metre long with s.s Trangular plate to Eueropean type w.c of qulity and make as approved by Engineer-in Charge including carriage of materials in all leads and lifts mechanical or manual means. |
| 160 | Providing and fixing G.I inlet connection for flush pipe connecting with W.C pan including carriage of materials in all leads and lifts mechanical or manual means. |
| 161 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in Charge including carriage of materials in all leads and lifts mechanical or manual means. |
| 162 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete .(a) Semi Rigid 40mm Dia including carriage of materials in all leads and lifts mechanical or manual means. |
| 163 | Providing and fixing 100mm C.P grating for gully/floor trap including carriage of materials in all leads and lifts mechanical or manual means. |
| 164 | Providing and fixing in positon 25mm diameter mosquito proof coupling of approved municipal design including carriage of materials in all leads and lifts mechanical or manual means. |
| 165 | Providing and fixing 600x450 mm beveled edge mirror of suoerior glass (of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass creews and washers complete including carriage of materials in all leads and lifts mechanical or manual means. |
| 166 | Providing and fixing 600x120x5 mm glass shelf with edges eound off, supported on anodised aliminium angle frame with C.P Brass brackets and guard rail complete fixed with 40mm long screws , rawl plugs etc. complete including carriage of materials in all leads and lifts mechanical or manual means. |
| 167 | Providing and fixing toilet paper holder including carriage of materials in all leads and lifts mechanical or manual means. |
| 168 | Providing and fixing M.S holder bat clamps of approved design to C.I or S.C.I waste pipes embedded in and including cement concrete blocks 10x10x10 cm 1:2:4 mix (1 cement :2 course sand :4 graded stone aggregate 20mm nominal size ) and cost of cutting holes making good the wallls etc. including carriage of materials in all leads and lifts mechanical or manual means. (i) 100mm dia |
| 169 | (ii) 75mm Dia |
| 170 | P/F on wall face or underground waste unplasticised rigid PVC pipes conforming to IS : 13592 Type B of Supreme / Finolex make including jointing with seal ring conforming to IS : 13592, leaving 10mm gap for thermal expansion , including carriage of materials in all leads and lifts by mechanicals or manual means. (i) Single socketed pipe (i) 150mm Diametr overall size having 2.7 mm thickness) |
| 171 | (ii) 100 mm Diameter overall Size having 2.7 mm thickness) |
| 172 | P/F on wall face or underground waste unplasticised rigid PVC pipes conforming to IS : 13592 Type B of Supreme / Finolex make including jointing with seal ring conforming to IS : 13592, leaving 10mm gap for thermal expansion , including carriage of materials in all leads and lifts by mechanicals or manual means. (i) Single socketed pipe (i) 150mm Diametr overall size having 2.7 mm thickness) |
| 173 | (ii) 100 mm Diameter overall Size having 2.7 mm thickness) |
| 174 | P/F on wall face unplasticised - PVC moulded fitting / accessories for unplasticised Rigid PVC waste pipes conforming to IS : 13592 Type B of Superme / Finolex make , including jointing with seal conforming to IS 5382 , leaving 10mm gap for thermal expansion including carriage of materials in all leads and lifts by mechanicals or manual means. Plain bend or reruired degree(i) 150mm Dia |
| 175 | (ii) 110mm Dia |
| 176 | (iii) 75mm Dia |
| 177 | Shoe (Plain) Heal rest (i) 110mm Dia |
| 178 | (ii) 75mm Dia |
| 179 | Coupler/ Collar (I) 150mm Dia |
| 180 | (ii)110mm Dia |
| 181 | (iii) 75mm Dia |
| 182 | Single tee with Door (i) 150x150x150mm |
| 183 | (Ii) 110x110x110mm |
| 184 | (iii) 75x75x75mm |
| 185 | Single tee without Door (I) 150mm Dia |
| 186 | (ii)110mm Dia |
| 187 | (iii) 75mm Dia |
| 188 | Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 12.mm niminal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement :4 course sand ) including carriage of materials in all leads and lifts mechanical or manual means. (i)110mm dia |
| 189 | (ii) 75mm Dia |
| 190 | Providing and fixing PTMT liquid soap container 109 mm wid, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved qulity and colour , weighing not less than 88 gms including carriage of materials in all leads and lifts mechanical or manual means. |
| 191 | Providing and fixing PTMT towel rail ring trapezoidal shape 215 mm long ,200 mm wide with minimum distance of 37mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms including carriage of materials in all leads and lifts mechanical or manual means. |
| 192 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings rrangement of approved quality and colour,(i) 600 mm long towl rail with total length of 645 mm, width 78mm and effectiveheight of 88mm, weghing not less than 190 gms including carriage of materials in all leads and lifts mechanical or manual means. |
| 193 | Providing and fixing PTMT shelf 440 mm long , 124 width and 36 mmm height of approved quality and colour, weghing not less than 300 gms including carriage of materials in all leads and lifts mechanical or manual means. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender