Bids Are invited for Facility Management Services - Lumpsum Based - Mosabani Concentrator Plant; Remodelling Of Existing Toilet At Administrative Building For Separate Ladies Toilet At Msb Plant; Consumables To Be Provided By Service Provider (Inclus
Tender Overview
Project Description
Bids Are invited for Facility Management Services - Lumpsum Based - Mosabani Concentrator Plant; Remodelling Of Existing Toilet At Administrative Building For Separate Ladies Toilet At Msb Plant; Consumables To Be Provided By Service Provider (Inclusive In Contract Cost) - Providing And Fixing Flush Door Shutters Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces O , Providing And Fixing P.V.C. Low Level Flushing Cistern With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fittings And Fixtures Complete.10 Litre Capacity - White , Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete.Semi Rigid Pipe32 Mm Dia , Providing And Fixing 600X120x5mm Glass Shelf With Edges Round Of Supported On Anodised Aluminium Angle Frame With C.P. Brass Brackets And Guard Rail Complete Fixed With 40 Mm Long Screws, Rawl Plugs Etc., Complete. , Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions :30 Cm Length15 Mm Nominal Bore , Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. External Work20 Mm Dia. Nominal Bore , Providing And Fixing Oxidised M.S. Tower Bolt (Barrel Type) With Necessary Screws Etc. Complete: 150*10 Mm. , Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260x350mm And 340X410x265mm Sizes Respectively With Automatic Flushing Cistern With Standard Flush Pipe And C.P. B , Providing And Fixing Trap Of Self Cleansing Design With Screwed Down Or Hinged Grating With Or Without Vent Arm Complete, Including Cost Of Cutting And Making Good The Walls And Floors :100 Mm Inlet And 100 Mm Outletsand Cast Iron , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix :1:4 (1 Cement: 4 Fine Sand) , Brick Work With F.P.S. Bricks Of Class Designation 75 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Neat Cement Punning , Providing And Fixing Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete. 300*16 Mm. , 12 Mm Cement Plaster Of Mix :1:6 (1 Cement: 6 Fine Sand) , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade :One Or More Coats On Old Work. , Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. External Work15 Mm Dia. Nominal Bore , Providing And Fixing Brass Bib Cock Of Approved Quality :15 Mm Nominal Bore , Providing And Fixing Brass Stop Cock Of Approved Quality :15 Mm Nominal Bore , Half Brick Masonry With F.P.S. Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position : Sal Wood , Renewing Glass Panes With Putty And Nails Wherever Necessary As Per Direction Of Engineer-In-Charge. Glass Panes Weighing 13.75 Kg/Sq.M (4Mm Thick) , Chipping & Removing Plaster From Old Wall Or Floor Surface At All Heights And Places, Scraping And Clean The Surface And Disposing Off The Debris Within Lead Of 2 K.M. , Providing And Laying Pcc 1 : 2:4 Etc. Complete As Per Direction Of Engineer Incharge. , Excavation In Foundation Tranches In All Kinds Of Soils Including Soil Mixed Gravel, Slag, Boulders Etc. Up To A Depth Of 2 M Include Watering Wherever Required Back Filling The Trenches With Good Quality Soil In 150Mm Layers, Watering And , Dismantling Or Cutting Openings In R.C.C. Or Other High Grade Concrete Structures, And Disposing Off The Debris As Directed Within A Lead Of 2 Km. , Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete : 125 Mm , Providing And Fixing 18Mm Thick Gang Saw Cut Mirror Polished Premoulded And Prepolished) Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills , Facias And Similar Locations Of Required Size Of Approved Shade, Colour And
BOQ
| Sl. No. | Item Title | Item Description |
| 1 | PROVIDING AND FIXING FLUSH DOOR SHUTTERS NON-DECORATIVE TYPE, CORE OF BLOCK BOARD CONSTRUCTION WITH FRAME OF 1st CLASS HARD WOOD AND WELL MATCHED COMMERCIAL PLY VENEERING WITH VERTICAL GRAINS OR CROSS BANDS AND FACE VENEERS ON BOTH FACES O | PROVIDING AND FIXING FLUSH DOOR SHUTTERS NON-DECORATIVE TYPE, CORE OF BLOCK BOARD CONSTRUCTION WITH FRAME OF 1st CLASS HARD WOOD AND WELL MATCHED COMMERCIAL PLY VENEERING WITH VERTICAL GRAINS OR CROSS BANDS AND FACE VENEERS ON BOTH FACES O |
| 2 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 3 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe32 mm dia | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe32 mm dia |
| 4 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 5 | Providing and fixing uplasticised PVC connection pipe with brass unions :30 cm length15 mm nominal bore | Providing and fixing uplasticised PVC connection pipe with brass unions :30 cm length15 mm nominal bore |
| 6 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work20 mm dia. nominal bore | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work20 mm dia. nominal bore |
| 7 | PROVIDING AND FIXING OXIDISED M.S. TOWER BOLT (BARREL TYPE) WITH NECESSARY SCREWS ETC. COMPLETE: 150*10 MM. | PROVIDING AND FIXING OXIDISED M.S. TOWER BOLT (BARREL TYPE) WITH NECESSARY SCREWS ETC. COMPLETE: 150*10 MM. |
| 8 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. b | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. b |
| 9 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outletSand Cast Iron | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outletSand Cast Iron |
| 10 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) |
| 11 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 12 | Neat cement punning | Neat cement punning |
| 13 | PROVIDING AND FIXING OXIDISED M.S. SLIDING DOOR BOLTS WITH NUTS AND SCREWS ETC. COMPLETE. 300*16 MM. | PROVIDING AND FIXING OXIDISED M.S. SLIDING DOOR BOLTS WITH NUTS AND SCREWS ETC. COMPLETE. 300*16 MM. |
| 14 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work. | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work. |
| 16 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work15 mm dia. nominal bore | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work15 mm dia. nominal bore |
| 17 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore | Providing and fixing brass bib cock of approved quality :15 mm nominal bore |
| 18 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore | Providing and fixing brass stop cock of approved quality :15 mm nominal bore |
| 19 | Half brick masonry with F.P.S. bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement : 4 coarse sand) | Half brick masonry with F.P.S. bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 20 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Sal wood | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Sal wood |
| 21 | Renewing glass panes with putty and nails wherever necessary as per direction of Engineer-in-Charge. Glass panes weighing 13.75 kg/sq.m (4mm thick) | Renewing glass panes with putty and nails wherever necessary as per direction of Engineer-in-Charge. Glass panes weighing 13.75 kg/sq.m (4mm thick) |
| 22 | Chipping & Removing plaster from old wall or floor surface at all heights and places, scraping and clean the surface and disposing off the debris within lead of 2 K.M. | Chipping & Removing plaster from old wall or floor surface at all heights and places, scraping and clean the surface and disposing off the debris within lead of 2 K.M. |
| 23 | Providing and laying PCC 1 : 2:4 etc. complete as per direction of Engineer Incharge. | Providing and laying PCC 1 : 2:4 etc. complete as per direction of Engineer Incharge. |
| 24 | Excavation in foundation tranches in all kinds of soils including soil mixed gravel, slag, boulders etc. up to a depth of 2 M include watering wherever required back filling the trenches with good quality soil in 150mm layers, watering and | Excavation in foundation tranches in all kinds of soils including soil mixed gravel, slag, boulders etc. up to a depth of 2 M include watering wherever required back filling the trenches with good quality soil in 150mm layers, watering and |
| 25 | Dismantling or cutting openings in R.C.C. or other high grade concrete structures, and disposing off the debris as directed within a lead of 2 KM. | Dismantling or cutting openings in R.C.C. or other high grade concrete structures, and disposing off the debris as directed within a lead of 2 KM. |
| 26 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm |
| 27 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender