Tender For New Electrification Work At Geotechnical Model Testing Facility Lab Shed In Civil Engineering Department In V.N.I.T. C Us, Nagpur.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Sep 2026
19 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for New Electrification Work At Geotechnical Model Testing Facility Lab Shed In Civil Engineering Department In V.N.I.T. C Us, Nagpur.
BOQ
| Sl. No. | Item Description |
| 1 | New Electrification Work at Geotechnical Model Testing Facility Lab shed in Civil Engineering Department in V.N.I.T. Campus, Nagpur. |
| 2 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 3 | Providing & erecting 4 Pole MCCB, 415V, up to 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB |
| 4 | Supplying and erecting SS enclosure of 1.6mm thick with detachable gland plate suitable for upto 100A MCCB |
| 5 | Supplying and erecting terminal spreaders suitable for 4 pole, upto 100A MCCB (Set of 8) |
| 6 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 7 | Supplying and erecting iron work,purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer. |
| 8 | Supplying, erecting & marking FP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 9 | Supplying, erecting & marking FP MCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 10 | Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB/TP MCB/FP MCB/RCCB/RCBO complete erected on provided angle iron/GI frame |
| 11 | Supplying, erecting, testing & commisioning plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fastenerssupports, nuts bolts etc. complete as per specification no. CP/SH/CR |
| 12 | Supplying, installing and testing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.I. cover with 10 Kg charcoal and 10 Kg salt and minimum 25 kg Carbon complete with all accessories of G.I. materials & recording the results as per specification no. EA-EP |
| 13 | Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints as per specification no.EA-EP |
| 14 | Supplying and erecting mains with WP 2 x 2.5 sq. mm. 1.1kV grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire no. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire |
| 15 | Supplying and erecting HMS PVC conduit 32mm dia. with PVC accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 16 | Making trench in Soft soil having 0.75m depth and minimum 0.3m width for laying G.I. bearer wire no. 8 SWG and G.I. strip of required size as per specification no. CW-EXN-CTR |
| 17 | Supplying & erecting crimping type aluminium lugs for cable 25 sq mm complete as per specification No. CB-CL/AL |
| 18 | Supplying & erecting crimping type aluminium lugs for cable 50 sq mm complete as per specification No. CB-CL/AL |
| 19 | Supplying and erecting 25mm dia. corrugated flexible polypropylene conduit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender