Tender For Repair & Renovation Of 20 Suits At Joti Building, Nagpur
Tender Value
83.90 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
4 days left
EMD
84000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Renovation Of 20 Suits At Joti Building, Nagpur
BOQ
| Sl. No. | Item Description |
| 1 | Removing brick bat coba including stackingthe spoils as directed with all leads, lifts etc,complete. |
| 2 | Removing cement tiles, or marble or polishedshahabad floor or dado without bed concreteincluding stacking the materials as directed withall leads, lifts etc. complete |
| 3 | Removing doors and windows with framesand stacking the materials as directed withall leads, lifts etc. complete. |
| 4 | Removing ventilators and small windows withframe and stacking the materials with all leads,lifts etc. complete. |
| 5 | Removing urinal pans or wash hand basins withframe including disconnecting the sanitary andwater supply connections, removing thesame carefully and stacking the serviceablematerials as and where directed includingthrowing the unserviceable materials outsideetc complete |
| 6 | Removing W.C. pans including disconnectingthe sanitary and water supply connections,removing and breaking flooring and bed concretearound pan removing the same carefullyand stacking the serviceable materials asadn where directed including throwing theunserviceable materiasls out side etc.carefully and throwing out the refusaloutside etc. complete. |
| 7 | Transportation of material obtained from debrisof various sorts excavated stuff includingnecessary excavation/ loosing including loading,unloading and conveying and disposing asdirected. ( Beyond 10 Km. ) |
| 8 | Providing waterproof plaster in W.C. and bath12 mm thick for dado in cement mortar 1:3 withneat finishing, floating using waterproofingcompound at the rate of 1 Kilogram. per bag ofcement of approved make and manufacturerand curing etc. complete. (Excluding Tiles) (Asdirected by Engineer in Charge) |
| 9 | Providing waterproofing in W.C. and bathincluding brick bat coba in all position includingproviding and laying 12mm bedding incement mortor 1:3 on vergin concrete slabwith waterproofing compound @ 1Kilogram/perbag of cement laying brick bat coba of requiredthickness in cm 1:5 with waterproofingcompound 1 Kilogram/bag of cement groutingand finishing the top layer with 20mm thick brickbedding in cm mortor 1:3 with waterproofingcompound 1 Kilogram/per bag of cement andtesting the treated portion for 48 hours by pondtest and covering ten years' guarantee onrequisite stamp paper including curing etc.complete. |
| 10 | Providing and laying vetrified mirror /glossyfinish tiles having size 1200mm x 600mm size of8 to 10mm thickness and conforming is 15622-2006 of approved make, shade, pattern doublecharges for Flooring in required position fixing in1:4 cement mortar including neat cement floatfilling joints curing and cleaning etc completemake Johnson/ Kajaria /Somany/ Rak/Orientbell or equivalent. (Excluding All Taxes) |
| 11 | Providing and laying vetrified mirror /glossyfinish tiles having size 1200mm x 600mm size of8 to 10mm thickness and conforming is 15622-2006 of approved make, shade, pattern doublecharges for dado and Skirting in requiredposition fixing in 1:4 cement mortar includingneat cement float filling joints curing andcleaning etc complete make Johnson/ Kajaria/Somany/ Rak/ Orientbell or equivalent(Excluding All Taxes) |
| 12 | Providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of8 to 10 mm thickness and confirming IS.15622-2006 (Group Bla) of approved make,shade and pattern for flooring in requiredposition laid on a bed of 1:4 cement morarincluding neat cement float, filling joints, curingand cleaning etc. complete. |
| 13 | Providing and laying vitrified matt finish tileshaving size 590 mm to 605 mm x to 605 mm of8 to 10 mm thickness and confirming IS.15622-2006 (Group Bla) of approved make,shade and pattern for dado and skirting inrequired position fixed in 1:4 cement mortarincluding neat cement float, filling joints, curingand cleaning etc. complete. |
| 14 | Providing and fixing in position Gypsumboard false ceiling with 12.5 mm thickGypsum boards, screwed/fixed to the understructure of suspended G.I. Grid constructedand suspended from the main ceiling consistingof ceiling sections of size 25 x 50 mm maximumcenter to center distance of 600 milimetreperimeter channel and intermediate channelsat maximum center to center distance 1200milimetre galvanized grid should be fixed toreinforced cement concrete slab. The gypsumboard should be fixed to galvanized iron gridwith necessary screws. The boards should betaped and filled from underside to give smooth,seamless ceiling. The rate should includenecessary additional ceiling sections andintermediate channels. Additional intermediatechannels should be fixed to strap hangers foradditional support to prevent strapping at every1200 milimetre item to be completed in allrespect including necessary sleeves for ductsfinishing of joints cut outs, painting includinglabour, material, lifts etc. all complete. |
| 15 | Providing and applying Two coats of wall carePutty on plastered surface and Ceiling andWalls to prepare surface even and smooth ofapproved make, etc complete. |
| 16 | Providing and applying plastic emulsion paint ofapproved quality, colour and shade to old andnew surfaces in two coats includingscaffolding, preparing the surface. (excludingthe primer coat)etc. complete. |
| 17 | Providing and fixing wall hung white wash basinof size 350x450x165mm with approved makepillar cock, C.P. Angular stop cock long threadapproved make continental including SS bottletrap of approved make having necessary pipeconnection up to the outside face of the wall etccomplete as directed by Engineer in charge. |
| 18 | Providing and fixing white european type wallhung,of size 360mm x 360mm x 575mm withflush valve of approved make including soilpipe, vent pipe upto outside face of wall,100mm dia C.I. plug bend inlet pipe allfittings,cutting & making good walls, floors etcas directed by Engineer in charge. |
| 19 | Providing and fixing 15 cm rigid PVCNahani trap including PVCgrating,bend,connectingpiece of UPVC pipeup to the outside face of wall ,making thegood damaged surface and testing etc.complete ( Prior approval of sample and brandby Ex. Engr. is necessary before use) |
| 20 | Providing and fixing 450mm x 550mm sizesuperior type Belgium mirror with 16mm dia.nickel plated towel rod etc. complete. |
| 21 | Solid Core Flush door Single leafProviding andfixing factory made solid core flush door insingle leaf 35 mm thick, decorative types, ofexterior grade, as per detailed drawings,conforming to I.S.:2202 - 1962 (Revised) withapproved face veneers on both faceswith/without glazing and venetians in thepositions shown on the drawings or as directed,all necessary beads, moulding and lipping,holdfasts, mat finish stainless steel fixturesfastenings , finishing with french-polish/ waxingcomplete. (without door frame).(Sample to begot approved from Ex.Engineer before use)Commercial Hard Wood shutter |
| 22 | Providing and fixing C.P. Angular stop clockwith wall flange of approved make continentalincluding necessary sockets/union nut etc.complete. |
| 23 | Providing and fixing 25 mm dia. screw downbib/ stop tap of brass including necessarysocket union nut complete. |
| 24 | C.P.Towel rail 24\\" jaquar make continental (Cat.No. ACN 1111N ) (Material Rates for SSr forYear 2022 - 2023) |
| 25 | C.P.Towel ring square jaquar make continental(Cat. No. ACN 1121N ) (Material Rates for SSrfor Year 2022 - 2023) |
| 26 | C.P.soap dish (polyurethane) jaquar makecontinental (Cat. No. AQN 7733 ) (MaterialRates for SSr for Year 2022 - 2023) |
| 27 | C.P.Toilet paper holder jaquar make continental(Cat. No. AQ 7751 ) (Material Rates for SSr forYear 2022 - 2023) |
| 28 | C.P.Toilet rack 24\\"with lower hanger jaquarmake continental (Cat. No. ACN 1181N )(Material Rates for SSr for Year 2022 - 2023) |
| 29 | Providing and fixing mild steel grill work forwindows, ventilators etc. 20 Kilogram/SquareMetre as per drawing including fixtures,necessary welding and painting with onecoats of anticorrosive paint and two coats of oilpainting complete. |
| 30 | Providing and laying telephone black /Amba White / Cadburybrown / Ruby red /Ocean Brown granite stone of 18 to 20 mmthick for door frame/ dado/ window boxing etc.On C.M. 1:6 including filling joints with polymerbase filler nosing/moulding the sharp edgeswherever necessary, curing, etc. complete. |
| 31 | Providing and fixing 3.5 to 4 mm thick Veneerfinish wall Panaling made out of 50 x 25 mm(finished size) C.C.T.W. frame work or size of600 x 600 mm center or as per site conditioncovered by 6 mm thick marine plywood ofthe generally confiriming to I:S 710-1980finished with 3.5 to 4 mm thick matchingVeneer of approved color and in satinwallnut groov matched veneer pattern anddesign including melamine polishing &design with antitermite treatment etc. toplywood and woodwork with ten yearsguarantee bond etc. including all lead and liftscomplete as per Architects Drawing andinstructions of Engineer Incharge. |
| 32 | Providing and fixing of factory made uPVCSliding window & door (White Colour) complete,comprising uPVC multi-chambered framehaving in-built uPVC roller track on top anduPVC sash with wall thickness of 2.3mm (+-0.2mm), duly reinforced with G.I. section 1.5 mm,wherever required. uPVC window & door profileshall be made in India & shall conform to BS EN12608 and other standards as mentionedbelow: S.No. Name of the test Test MethodSpecified Parameter 1 Tensile Impact StrengthISO 8256 - more than 700Kj/m2 2 VicatSoftening Temperature EN ISO – 306 Shall notbe < 750C 3 Charpy Impact Strength EN ISO –179-2 Shall not be < 20KJ/m2 4 FlexuralModulus Elasticity EN ISO – 178 Shall not be <2200 N/mm2 5 Mean Breaking Stress forwelded corner (a) For the tensile bending testEN – 514 Shall not be < 25 N/mm2 (b) For thecompression bending test Shall not be <30N/mm2 6 Heat Reversion Test IS:4985-2000Shall not be > 2.0 % 7 Surface Spread of flameBS : 476 - Part 7 Classification 1 8 IgnitabilityEvaluation BS : 476 - Part 5 'P' Not easilyignitable 9 Tensile modulus ASTM D 638 Shallnot be < 35 MPa 10 Shear Modulus ASTM D732 Shall not be < 220 MPa 11 Tensile StrengthEN ISO 527 Shall not be < 30 MPa All cornersof frame and sash will be fusion welded. After |
| 33 | Providing and fixing Shower Head with showerarm of approved make shower tube handshower with divertor of spout including allnecessary pipe fittings and connections etc.complete as directed by Engineer in charge. |
| 34 | Providing and fixing in position powder coatedaluminium louvered windows / ventilator ofvarious sizes with powder coating as perdetailed drawing and specifications includingaluminium frames 80 x 38 mm x 1.22 mmbox type, 5 mm thick sheet glass louvers,of approved quality etc. complete. |
| 35 | Carrying out testing BASIC TEST OFCEMENT. Standard Consistancy, Fineness,Specific Gravity, Setting Time ( Initial & Final ),Compressive Strength, Soundness. |
| 36 | Carrying out testing BASIC TEST OFCERAMIC TILES / VITRIFIED TILES WaterAbsorption, Modulus of Rupture (Set of 6 Tiles) |
| 37 | Royalty Charges |
| 38 | carrying out basic test of fine Aggregatesfinenessmodulus (sieve anyalysis) silt and claycontent Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender