Tender For Construction Of Kalyan Mandap At Khuntgaon, Nuagaon Block
Tender Value
70.64 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
5 days left
EMD
70640
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Kalyan Mandap At Khuntgaon, Nuagaon Block
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in hard soil Within initial lead of 50m.and 1.5m.initial lift Including rough dressing and leveling the bed as directed by the Engineer-in-charge. |
| 2 | Filling in Foundation and Plinth with sand well watered and rammed including cost, carriage & royalty of materials etc. complete as per the direction of Engineer-in-charge. |
| 3 | Cement Concrete(1:3:6)with 4 Cm..size H.G.C.B. metal including cost, carriage & royalty of materials etc. complete as per the direction of Engineer-in-charge. |
| 4 | Cement Concrete (1:2:4) using 12mm size HGCB chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance , royalty, taxes of all materials, labour and T&P required for the work etc. complete as per specification and direction of EIC. |
| 5 | Brick masonary work with Fly Ash bricks in cement mortar (1;6) F & P inlcuding cost, carriage & royalty of materials etc. complete as per the direction of Engineer-in-charge. |
| 6 | Brick masonary work with Fly Ash bricks in cement mortar (1:6) in super structure inlcuding cost, carriage & royalty of materials etc. complete as per the direction of Engineer-in-charge. |
| 7 | Brick work with fly ash Bricks of size 23cm x 11cm x 8cm) in cement mortar (1:4) in superstructure having crushing strength not less than 75.00kg/cm2 |
| 8 | RCC work of M 20 grade with 20 mm and down grade black hard granaite (Crusher Brocken) chips including hosting and laying & royalty of materials etc. complete as per the direction of Engineer-in-charge. |
| 9 | Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete. |
| 10 | Rigid smooth centering and shuttering for RCC work including flase work and dismantling them after casting. For RCC Foundation, Plinth Band & footing bases of Columns mass concrete |
| 11 | Rigid smooth centering and shuttering for RCC work including flase work and dismantling them after casting. For Lintel Band |
| 12 | Rigid smooth centering and shuttering for RCC work including flase work and dismantling them after casting. For Beams & Column |
| 13 | Rigid smooth centering and shuttering for RCC work including flase work and dismantling them after casting. For RCC Floor and roof slabs, landings, balconies, projecting sun shades and chajjas |
| 14 | Rigid smooth centering and shuttering for RCC work including flase work and dismantling them after casting. For RCC stairs excluding landingbut including railing details |
| 15 | Rigid smooth centering and shuttering for RCC work including flase work and dismantling them after casting. For RCC stairs excluding landingbut including railing details |
| 16 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips including hoisting and laying in position compacting and curing for proper period with cost conveyance, royalty, taxes of all materials, labour and T&P required for the work etc. complete as per specification and direction of EIC. |
| 17 | 12 mm. thick cement plaster with cement mortar (1:6) over brick work inlcuding cost, carriage & royalty of materials etc. complete as per the direction of Engineer-in-charge. |
| 18 | 16 mm. thick cement plaster with cement mortar (1:6) over brick work inlcuding cost, carriage & royalty of materials etc. complete as per the direction of Engineer-in-charge. |
| 19 | 6 mm. thick cement plaster with cement mortar (1:4) over RCC Surface inlcuding cost, carriage & royalty of materials etc. complete as per the direction of Engineer-in-charge. |
| 20 | Supplying, fitting and fixing vitrified tile (Plain Ivory) in floors of size 600mm x 600mm of approved make conformaing to IS : 13755 laid on 20 mm thick cement mortar (1:4) (1 cement :4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of E.I.C. (For New work only) |
| 21 | Fixing Vitrified tiles (size 600mmx600mm) (Plain Ivoy) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) confirming to IS 13756 , jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. |
| 22 | Fixing ceramic tiles (30cmx30cm/ 40cmx40cm special plain/ printed series ceramic floor tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755) in floor, treads or stepsand landing on a 25mm thick bed of cement mortar 1:1 (1 cement: 1sand) jointed with neat cement slurry mixed with pigment to match the shades of the ceramic tiles including rubbing and polishing, cost of precast tiles complete as per direction of EIC. |
| 23 | Fixing ceramic tiles (30cmx30cm/ 40cmx40cm special plain/ printed series ceramic floor tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the ceramic tilesincluding rubbing and polishing, cost of precast tiles complete as per direction of EIC. |
| 24 | Fixing Chequred Tiles in floor, treads or steps and landing on a 25 mm thick bed of cement mortar 1:1 (1cement: 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the Chequred tiles including rubbing and polishing, cost of precast tiles as per direction of EIC. |
| 25 | Finishing wall two coats with plastic emulsion pain of approved shades on new work to give an even shade including all cost of labour, Paint and Brushes required for the work, etc. complete and as per direction of the EIC (Inside wall surface) |
| 26 | Finishing surface of walls with Cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour, T&P, etc. complete and as per direction of EIC. (Inside surface area) |
| 27 | Finishing wall two coats with weather coat one coat waterbound Primaer including all costs of labour, Paint, Primer, Brushes and putty required for the work etc. complete as per direction of EIC. (Outside surface) |
| 28 | Priming one coat with inner surface primer of approved quality water-bound primer over plastering surfaces including cost conveyance, taxes of all materials, labour and T&P required for the work complete as per direction of EIC. (Inside surface area) |
| 29 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. and as per direction of EIC. |
| 30 | Providing fitting and fixing of false ceiling with Aluminium anodised T section No.3215 with 2'-0\\" center to center, L section No.1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plugand the Aluminium grid 2'-0\\" x 2'-0\\" with 12 mm thick Prelaminated Novapan board suspeded from ceiling etc. complete and as per direction of EIC. |
| 31 | Providing and fixing ISI marked Flush door shutters confirming to IS:2022(Part-I) decorative type, core of 32 mm thick block board embedded with 25mm thick teak wood bitto as leaping and well matched 1.5 mm thick decorative laminate of teak three ply veneering with vertical grain or cross bands and face veneer on both faces of shutters with adhesive and complete in all respect. including cost of materials, necessary fittings, labour, conveyance, taxes of all materials, T&P, etc. and as per direction of EIC. |
| 32 | Supplying, fitting and fixing of Un-plasticised Poly Vinyl Chloride (UPVC)(FENESTA/NCL VEKA LTD) casement Door-60 Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 102mm x 60mm x 2.25 mm for casement door Sash Profile and 74mm x 60mm x 2.5mm mulion profile capable of mounting single glazing systemstructurally reinforced with hot dip galvanised upto 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of green ply makeduly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no per set of sashes and the system is not to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc. including cost and conveyance of all materials accessories, labour charges, materialsand product confirming to ASTM D 638-14, EN-477-95 and other applicable codes and standards and as per direction of EIC. (Rate given by Office of the Engineer-IN-Chief (Civil) Odisha Nirman Soudha Unit-V, Bhubaneswar vide letter no 16100 dated 08/05/2018) |
| 33 | Supplying, fitting and fixing of Un-plasticised Poly Vinyl Chloride (UPVC)(FENESTA/NCL VEKA LTD) Three Track - Three panel sliding window - 60 Series duly manufactured using UPVC reiforced profiles of 108mm x 45mm x 2.5 mm for outer frames and window sash 39mm x 58mm x 2.5mm capable of mounting single glazing system structurally reinforced with dip glavanised upto 50 microns of minimum thickness of 1.5 mm prefabricated and welded through fusion welding the window frame shall be fitted with 6mm thick thick clear toughened glass of SAINT -GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced large coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc. including cost and conveyance of all materials accessories, labour charges, materials and product confirming to ASTM D 638-14, EN-477-95 and other applicable codes and standards and as per direction of EIC. (Rate given by Office of the Engineer-IN-Chief (Civil) Odisha Nirman soudha Unit-V, Bhubaneswar vide letter no 20894 dated 26/05/2022) |
| 34 | Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect confirming to IRC SP- 63-2018. (New miscellaneous items) |
| 35 | ELECTRICAL Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender