Tender For Annual Rate Contract For Industrial Painting Of Tanks (External) At Digboi Refinery.
Tender Value
1.98 Crore
Estimated cost
Bid Submission
04 Sep 2026
12 days left
EMD
50000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Rate Contract For Industrial Painting Of Tanks (External) At Digboi Refinery.
BOQ
| Sl. No. | Item Description |
| 1 | ARC for External Tank Painting |
| 2 | Applying priming coat with ready mixed primer of approved brand and manufacturer at all heights over steel surfaces like structures, columns, pipes, vessels, tanks etc. as per manufacturers specifications and directions of the Engineering-in- Charge; all complete including cleaning the surface using emery papers/ Power tool cleaning such as ST-2 or ST-3 as per requirement, including all material, consumables, tools, tackles, labour etc but excluding Scaffolding. Note- No. of coats mentioned in the SOR items are only indicative and contractor has to achieve rquired DFT by applying more coats (if required) within the relevant SOR item rates. |
| 3 | Inorganic Zinc Silicate primer to achive a minimum DFT of 65-75 microns (one or more coat of 65-75 micron each). |
| 4 | Two pack epoxy phenolic primer to achive a minimum DFT of 300 microns (2 or more coats of 150 micron each) |
| 5 | HB Zinc phosphate coating primer to achive a minimum DFT of 30-35 microns (1 or more coat of 30-35 micron ) |
| 6 | Solvent free / high solids surface tolerant epoxy coating to achive a minimum DFT of 350-500 microns (2 or more coats of 175-250 micron each) |
| 7 | Self priming HB coating primer to achive a minimum DFT of 100- 125 microns (1 or more coat of 100-125 micron) |
| 8 | Epoxy mastic coating to achive a minimum DFT of 75-125 (One or more coat of 75-125 micron) |
| 9 | Supplying and applying various epoxy and other protective intermediate / finish paints of approved brand and manufacturer at all heights over prepared/primed surface for steel structures, pipelines, tanks, vessels, equipments, concrete floors etc. as per manufacturers specification and directions of Engineer-in-charge all complete including all materials, labours, tools-tackles and consumables etc but excluding Scaffolding. Note- No. of coats mentioned in the SOR items are only indicative and contractor has to achieve required DFT by applying more coats (if required) within the relevant SOR item rates. |
| 10 | HB Epoxy MIO to achive a minimum DFT of 100-150 microns (one or more coat of 100-150 Micron). |
| 11 | Two pack Acrylic Poly-urethane (PU) to achive a minimum DFT of 40-50 microns (one or more coat of 40-50 micron). |
| 12 | HR aluminium / Silicone Aluminium paint 120 - 200 degree C to achive a minimum DFT of 40 microns (Twoor more coats of 20 micron each). |
| 13 | Two pack epoxy phenolic 120 - 200 degree C to achive a minimum DFT of 300 microns (Two or more coats of 150 micron each). |
| 14 | HR aluminium / Silicone Aluminium paint above 200 degree C to achive a minimum DFT of 40 microns (Two or more coats of 20 micron each). |
| 15 | HB epoxy finish to achive a minimum DFT of 150-200 microns (Two or more coats of 75 - 100 micron each). |
| 16 | Amine cured solvent free high build epoxy liner to achive a minimum DFT of 400-500 microns (Two or more coats of 200-250 micron each). |
| 17 | Water-resistant epoxy-phenolic coating polymerized with an amine adduct-type curing agent to achive a minimum DFT of 250-300 microns (Two or more coats of 125 - 150 micron each). |
| 18 | Surface cleaning to Sa 2-1/2 Swedish Specification by Grit/shot blasting (extra over St-2 / St-3 cleaning) by using abrasive materials of size range 16 to 30 (~0.6 to 1.2 mm) mesh like copper grit / shot etc as per relevant standard and direction of Engineer-in-Charge on steel surfaces like storage tanks, columns, vessels, exchangers, chimneys, steel structures and other flat surfaces including pipelines of 350 NB and above diameters in position at all heights including all materials, equipments, tools and plants, consumables, labour etc complete in all respect as directed by Engineer-in-charge but excluding cost of scaffolding. Compressed Air shall be in the scope of contractor (Contractor will have to make his own arrangement for compressor etc. for arranging required air for blasting). |
| 19 | Re-lettering with black Japan paint of approved brand and manufacture. Note: Unit \\"EACH\\" (EA) stands for \\"Per letter per cm height\\". |
| 20 | Local Area loading Factor on civil M&I SOR @ 27.77 % (Applicable for It. No. 10 to 180 |
| 21 | STEEL SCAFFLODING (MATERIALS IN CONTRACTOR'S SCOPE) The job includes supply of all scaffolding materials, transportation to work site, erection of scaffolding at site as per ISMS (IndianOil Safety Management System) Standard-1007 on Scaffold Safety with safest and reliable design. Scaffolding design should consider the worst load combination expected during its service period. The supporting structure should be sufficient in strength, stability, and rigidity; The safety of personnel associated with the erection, alteration, and dismantling of the scaffold; the safety of persons using the scaffold; and the safety of persons in the vicinity of the scaffold to be considered mandatorily. Standard Tags for \\"Fit for Use\\" in Green Color and \\"Not Fit for Use\\" in Red Color to be fitted on scaffolding as per ISMS Standard-1007. Note: 1. For measurement in SQM: 2 (length + width) X height area covered by the scaffolding is to be taken. 2. Scaffolding measurement to be done by breaking the height into parts as per height slab mentioned below and adopting respective rates against mentioned height slabs. |
| 22 | Upto 6 M |
| 23 | Above 6 m upto 10 m |
| 24 | Above 10 m upto 20 m |
| 25 | Intermediate plate form |
| 26 | PF ,EDLI and ESI charges (@13% on 23.5% of Total value of civil works) on SOR items (items from 10 to 240) limited to 23.5% on executed amount and PF payment made to workers on actuals as per wage sheet, whichever is minimum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender