Tender For Plinth Protection At Govt. Model High School In Sector-12, Pgi, Chandigarh
Tender Value
14.87 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
3 days left
EMD
29746
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Plinth Protection At Govt. Model High School In Sector-12, Pgi, Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in charge. |
| 2 | All kinds of soil (DSR 2.6.1) |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift (DSR 2.25) |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (DSR 2.27) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 6 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 4.1.8) |
| 7 | making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. (DSR 4.17) |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in |
| 9 | Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.1.1) |
| 10 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 11 | In gratings, frames, guard bar,ladder, railings, brackets, gates and similar works (DSR 10.25.2) |
| 12 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. |
| 13 | 40 mm wide and 4 mm thick (DSR 11.13.1) |
| 14 | 12 mm cement plaster of mix : |
| 15 | 1:4 (1 cement: 4 fine sand) (DSR 13.1.1) |
| 16 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 17 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (DSR 13.46.1) |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade |
| 19 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (DSR 13.62.1) |
| 20 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR 13.80) |
| 21 | Providing and fixing 60mm thick high density rubbber moulded precast cement concrete pavers block grey/ coloured/designer polished (manufactured by vibro hydraulic pressure process) consisting of design mix of cement, sand and fine aggregate having designation M-35 duly ISI Marked including the cost of 1st quality colours and hardening agents. The paver should be complied with tensile strength and breaking test as per BIS 6717-1993 and shall be tested against resistance to bear as per IS 1237-1980 (specification of cement concrete floor tiles). The paver should be laid over a layer of 25mm thick screened sand to the required slope and requirement complete in all respect and to the entire satisfaction of Engineer-in-charge. (NS) |
| 22 | NEW BIG KERB: Providing and fixing of factory manufactured precast concrete kerb of size 300mm x 300mm having 100mm thickness at bottom & 75mm at top duly vibrated mechanically and compacted made of P.C.C 1:2:4 duly cured and finished. The rate further include filing of joints between kerbs / channels with cement mortar 1:2 complete in all respect and to the entire satisfaction of Engineer-in-charge (NS) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender