Tender For Providing Deep Borewells At The Nerur Head Pumping Station In Karur City Municipal Corporation.
Tender Value
12.50 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
6 days left
EMD
12500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Deep Borewells At The Nerur Head Pumping Station In Karur City Municipal Corporation.
BOQ
| Sl. No. | Item Description |
| 1 | Investigation charges for Geophysical survery finding of yeild to the point drilling of Borewell for all etc., complete |
| 2 | For investigation purpose: Drilling of borewells of size 6\\" to 8\\" dia in sedimentary formation using hand bore set including insertion of pipes and removal of casing pipes ect, including collection ofsamples as directed by the departmental officers ect, complete., |
| 3 | Drilling of 4 1/2 diameter borewell by using calyxdrill including transportation charges and insertion of casing pipes (excluding cost of casing pipe ) for plain area. etc complete., |
| 4 | Reaming from 6” Pilot bore to 12” size bore as directed by the Departmental Officers. etc complete., |
| 5 | Supply and delivery of 250 mm Dia 6 mm thick M.S Casing pipe for Borewell. At site .etc complete., |
| 6 | Labour charges for making slotts in the 250 mm Dia 6 mm thick M.S Casing pipe by using lathe machine and slot cutting machine as directed by the departmental officers ect, complete., |
| 7 | Supply and delivery of 250 mm Dia 6mm thick dummy cap etc complete., |
| 8 | Supply of 16 x 25 SWG stainless steel wire mesh etc complete., |
| 9 | Supply of MS wire for wrapping around wire mesh over the 250mm dia slotted MS casing pipe and for 32mm dia G I pipe etc complete., |
| 10 | Supply of 150mm dia G.I pipe (medium) as per IS 1239/PART I/90 etc complete., |
| 11 | Supply of 150 mm dia GI 6” x 5” reducer for Submersible motor pump set etc complete., |
| 12 | Supply of 125/150mm GI barrel Bit for bore well submersible motor pump set etc complete., |
| 13 | 125mm dia GI barrel bit |
| 14 | 150mm dia GI barrel bit |
| 15 | Labour charges for inserting casing pipes assembly (with slot or without slot) in the drilled hole including welding the joint etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Departmental officers. etc complete., |
| 16 | Charges for developing the borewell with air compressor of 600 cfm capacity (minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by the Departmental Officers and conducting yield test by ‘V’ notch method ect, complete., |
| 17 | Supply and delivery of wet type submersible Motor pump set Duty 2200 Lpm X 30-40 M with suitable 1.1 KV grade 3 core copper flat cable of 3m Make: TEXMO/eqaualant ISI make at site. ect, complete., |
| 18 | Supply of rubber insertion sheet - 3ply etc . Complete., |
| 19 | Supply of 150 mm dia MS flange for bore well delivery line etc complete., |
| 20 | Supply and delivery of 150 mm dia G.I. Equal Elbow plain as directed by the departmental officers.etc. complet |
| 21 | Supply and delivery of 150 mm dia G.I. Coupling as directed by the departmental officers.etc. complet |
| 22 | Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 m in narrow trenches for laying of pipes for water supply in the Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandy loam and ordinary soil etc complete., |
| 23 | Refilling with excavated soil complying with the standard specification for filling in foundation and basement .etc. complete. |
| 24 | Laying of G.I pipes and specials to proper level including jointing but excluding cost of pipes and jointing materials etc. complete. |
| 25 | Labour charges for welding to 150 mm dia G.I pipe with M.S flanges including consumables etc., complete |
| 26 | Supply and delivery of 16 sq mm copper flat cable for bore well motor pump set including all taxes, as directed by the departmental officers.etc. complet |
| 27 | Supply and delivery of L.T. 3.5 Core x 50 sq.mm 1.1 KV Grade Armoured Aluminium conductor cable conforming to IS 1554 Part I with ISI marking at site. ect, complete., |
| 28 | Supply and delivery of direct online starter suitable 30 HP rating for AC three Phase / 50HZ (+/- 5%) and 415V (+/- 10%) including Ammeter, Overload relay,Single phasing preventor, Air Break contactors suitable for next Standard higher HP rating and On/Off Push button switches with indicator lamps including all taxes, as directed by the departmental officers.etc. complete |
| 29 | Manufacture, Supply and Delivery 150 mm dia of DI D/F Slanted seat Swing Check Valve. Body of ductile cast iron of Grade GGG 40 or equivalent grade and disc of ductile cast iron GGG 40 or equivalent grade with fully encapsulated EPDM rubber, where both faces can be used. Electrostatic epoxy powder/liquid coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270. (EP-P) it is a resi-coat powder approved for drinking waterapplication, applied through fusion bonding process by dipping the shot-blasted casted components heated up to 200 deg C). Face to face dimensions as per EN558-1, series 48 and flange connections as per EN 1092-2/IS 1538 |
| 30 | Supply and delivery 150 mm dia of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O- Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163- 89/ISI 14846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender