Tender For Improvement Of Electrical System And Other Allied Works At Mandawali Sps And Geeta Colony Sps.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Aug 2026
4 days left
EMD
25700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Electrical System And Other Allied Works At Mandawali Sps And Geeta Colony Sps.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning single pole etc. as required. Make: DJB approved make. |
| 2 | Supplying & Fixing 32 amp. rating 240/415 V, volt miniature circuit breaker suitable for lighting and other loads of single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required, SPN. Make: DJB approved make. |
| 3 | Supplying and fixing 5 A to 32 A rating, 240/415 V,10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: DJB approved make. |
| 4 | Supplying and fixing of 4way (4+18),Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). Make: ISI Marked. |
| 5 | Supplying and fixing of 8way (4+24),Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). Make: ISI Marked. |
| 6 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Make: DJB approved make. |
| 7 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Make: DJB approved make. |
| 8 | Wiring for circuit/submain wiring along with earth wire with the 2X1.5sq.mm+1 X1.5sq.mm earth wire earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make: DJB approved make. |
| 9 | Wiring for circuit/submain wiring along with earth wire with the 2X2.5sq.mm+1 X2.5sq.mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make: DJB approved make. |
| 10 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Make: ISI Marked. |
| 11 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Make: ISI Marked. |
| 12 | Providing/ Fixing of 45W L.E.D Light energy saving & environmental friendly long-life Versatile pressure die-cast aluminium IP 66 roadway laminate with high power L.E. D as light source. Make-Havells/Bajaj/Crompton/ DJB approved make. |
| 13 | Providing/ Fixing of 70/72 W L.E.D Light energy saving & environmental friendly long-life Versatile pressure die-cast aluminum IP 66 roadway laminate with high power L.E. D as light source. Make-Havells/Bajaj/Crompton/ DJB approved make. |
| 14 | Pole junction box. Make: Sintex/National. |
| 15 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections butexcluding modular plate etc. as required. Make: ISI Marked. |
| 16 | Supplying and fixing of 32 mm dia. X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV /HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 17 | Supply of exhaust fan having size 380 mm, 1440 R.P.M. in grey colour of single phase 230 volts. Make: - Orient/Almonard/ Havells/ CG/ Usha. |
| 18 | Supply of Air Circulator of size 600 mm Make: - Orient/Almonard/ Havells/ CG/ Usha. |
| 19 | Supply of pedistrial fan of size 450 mm Make: - Orient/Almonard/ Havells/ CG/ Usha |
| 20 | Supply of industrial emergency light with exit sign LED light 12 watt with charging facility for providing the emergency light arrangement on wall mounting. Make: ISI marked. |
| 21 | Installation of exhaust fan/air circulator in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Also for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
| 22 | Supply of Higher wattage decorative ulta slim polycarbonate LED 25 w lighting fixture with high lumen output enviromantal freidly energy efficient ready to use pack. Make: DJB approved make. |
| 23 | Installation, testing, commissioning of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. |
| 24 | Supply of Clamp Meter 1000A Current Amp Meter, VFD, LOZ Mode, 6000 Counts, Measures Current, Voltage, Temperature, Capacitance, Resistance Diodes Continuity. Make- Fluke, kaiweet, sigma. |
| 25 | Supply of LT Power aluminum cable, solid conductor, XLPE insulated, PVC sheathed, armoured, 650/1100 V grade as per IS 7098 (Part 1) 1988 size 3 core 25 mm2 Make: - Grandley/ Gloster/ Havells/ Universal/ DJB approved make. |
| 26 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Upto 35 sq. mm (clamped with 1mm thick saddle) on wall surface as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender