Tender For Miscellaneous Aluminium Work In Windows And Blinds At Various Lab Of Csir-Iitr Main C Us And Crk C Us , Lucknow.
Tender Value
5.51 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
5 days left
EMD
11031
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Miscellaneous Aluminium Work In Windows And Blinds At Various Lab Of Csir-Iitr Main C Us And Crk C Us , Lucknow.
BOQ
| Sl. No. | Item Description |
| 1 | Sub Head-I (Civil Works) |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below |
| 3 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 4 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 5 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 6 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm |
| 7 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 8 | Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 9 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6(1 cement: 6 coarse sand) |
| 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 11 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 12 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 13 | Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 14 | Providing and fixing Vertical Blinds of approved make, consisting of 100 mm wide polyester fabric louvers, powder coated aluminium head rail, self-aligning carrier system, bottom weights and chain, complete with all fittings, accessories, fixing arrangements and labour, as approved by Engineer-in-Charge |
| 15 | (Star Lock)Providing and fixing Star Lock (Crescent Lock) for aluminium sliding windows, made of die-cast zinc alloy/aluminium with powder-coated/anodized finish, complete with striker plate, screws, fixing accessories and all necessary hardware. The lock shall be suitable for smooth and secure locking of aluminium sliding shutters and shall be fixed in position as directed by the Engineer-in-Charge. |
| 16 | (Swing Roller) Providing and fixing Swing Roller (Garari/Roller Wheel) for aluminium sliding windows, manufactured from engineering-grade nylon/polymer wheel with zinc-plated or stainless-steel housing, suitable for smooth and noiseless operation of sliding shutters. The item shall be complete with axle, bearings, screws, fixing accessories and all necessary fittings, including removal of defective roller and replacement with new roller, as directed by the Engineer-in-Charge. |
| 17 | Providing and fixing Roller Blinds of approved make, colour and design, comprising polyester fabric, aluminium roller tube, manual chain operating system, bottom rail, brackets and all accessories, complete as required and directed by Engineer-in-Charge. |
| 18 | (Frosted film) Providing and fixing decorative frosted/acid-etched effect self-adhesive polyester/PVC based film on existing aluminium glazed partitions and/or doors, of thickness as per manufacturer’s technical data sheet (film + adhesive thickness typically between 75 and 155 microns depending on pattern), with approved horizontal stripe pattern of specified width and spacing; having minimum 99% UV rejection, Class A fire rating (ASTM E84 or equivalent), permanent pressure-sensitive adhesive, and suitable for interior vertical glass applications; including thorough cleaning and preparation of glass surface, cutting to required size, proper alignment of stripes, wet application using suitable solution to prevent air bubbles/creases, neatly trimming edges, removing excess material, making good disturbed portions, and completing the work as per manufacturer’s specifications and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender