Tender For Provn Of Toilet Block For Women Offrs At Grand Stand Area, Toilet And Bathroom Block At Mt Area And Alpha Hill, Covered Shed At Multipurpose Training Range And False Ceiling At Various Bldgs At Cijw School Vairengte
Tender Value
47.60 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
20 days left
EMD
95200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolasib → Mizoram
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilet Block For Women Offrs At Grand Stand Area, Toilet And Bathroom Block At Mt Area And Alpha Hill, Covered Shed At Multipurpose Training Range And False Ceiling At Various Bldgs At Cijw School Vairengte
BOQ
| Sl. No. | Item Description |
| 1 | B & R Division Items |
| 2 | Excavating in trenches, n exc 1.50 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/ loose type of soil complete all as specified and directed. |
| 3 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 30cm thick complete all as specified and directed. |
| 4 | Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed. |
| 5 | M&L for Hardcore broken stone of gauge exc 40mm and n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 6 | M&L for plain cement concrete (1:4:8), Type D-2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete complete all as specified. |
| 7 | M&L for 75 mm thick cement concrete (1:4:8) type D-2 using (40mm graded stone aggregate) as in Sub base of floor rough surface for receiving tile complete all as specified. |
| 8 | M & L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) as in plinth protection 75mm thick finished over and smooth without using extra cement complete all as specified and dirceted |
| 9 | M&L for plain cement concrete (1:3:6),Type C1 using 20 mm graded stone aggregate as in surface channels, drains (forming fair finished channel shall be measured and paid for seperately) complete all as specified. |
| 10 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends for etc complete all as specified and directed. |
| 11 | M&L for PCC (1:3:6),Type C2 using 40 mm graded stone aggregate as in bed to drain for 150 mm bore including packing under and hunching against side of pipe after they are laid and tested complete all as specified. |
| 12 | M & L for 40mm thick Plain Cement concrete 1:2:4 type B1 (20mm graded crushed stone aggregates) as in floors etc in alternate bays, surface finish with steel trawel without using extra cement all as specified and directed. |
| 13 | M & L for 3mm thick, 38mm wide glass dividing strip as in PCC flooring complete all as specified and directed. |
| 14 | M & L for forming contraction joints 30mm deep X 10mm wide, filled with sealing compound of 'grade A' complete all as specified and directed by Engr-in-charge. |
| 15 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed. |
| 16 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete all as specified and directed. |
| 17 | Use and waste Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as specified and directed. |
| 18 | M & L for providing Reinforced Cement Concrete Design mix M-25 using 20 mm graded aggregate a in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed. |
| 19 | M & L for providing Reinforced Cement Concrete Design mix M-25 using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 20 | M & L for providing Reinforced Cement Concrete Design mix M-25 using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m complete all as specified and directed. |
| 21 | M & L for Mild Steel TMT Bar 10mm dia and over , cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 22 | M & L for Mild Steel TMT Bar 6mm to 8mm dia , cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 23 | M & L for Mild Steel TMT Bar 6mm dia and over up to 10 mm dia as in stirrups, spacers and binders as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed |
| 24 | M & L for brick work with subclass 'B' old size brick, straight or curved on plan exc 6 m mean raduis, built in cement mortar (1:6) complete all as specified and directed. |
| 25 | M & L for brick work in half brick thick wall with subclass 'B' old size brick, straight or curved on plan to any radius complete all as specified . |
| 26 | M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified. |
| 27 | M & L 15 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces in two layer each of 10mm + 5mm thick & water proofing compound mixed with second layer @ 3% finished even and fair without using extra cement complete all as specified. (Note :WPC shall be measured separately). |
| 28 | Supply only integral water proofing compound complete all as specified. |
| 29 | M & L Non Skid ceramic tiles coloured 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed or bedding layers in cement mortar 1:6 over brushing with neat cement slurry complete all as specified. |
| 30 | M & L Glazed ceramic coloured tiles in vertical surface size 450mm or 600mm x 300mm x & ( 6mm to 7mm )mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick screed bed or backing coat in cement mortar 1:4 laying of skirting/dado on walls all as specified and directed. |
| 31 | M&L for 18-20mm thick granite stone slab, of any type, table rubbed and polished, in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 32 | Rounding to edge of stone slabs one edge, such as in step cooking plateform and other situation complete all as specified and as directed. |
| 33 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 34 | S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 35 | S & F Framed work such as grills, gratings, etc. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 36 | S & F structural steel work in tubular/hollow sections trusses , Purlin , posts, rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as as specified and directed. |
| 37 | M & L for second class harwood timber scantlings clean swan in unframed work complete all as specified and directed. |
| 38 | S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type with decorative faces veeners on both sides, smooth finish with lipping of teak wood on edges complete all as specified and directed. |
| 39 | S & F Solid PVC door frame of size 50mm X 47mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube , supplying & fixing in opening as per specification & drawing complete all as specified . |
| 40 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & Fing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved. |
| 41 | S & F 2 way sliding anodized aluminium glazed ventilator shutter with frame consists of following specification all as specified & directed.(a) Ventilator frame 2 track of size 60mm × 25mm × 1.5mm thick.(b) Stiles and rails of size 35mm × 25mm × 1.5mm.(c) 35mm × 35mm × 1.5mm T section mullion.(d) PVC gasket with 4mm thick tinted glass, incl. aluminium handles with necessary locking arrangement.Note: Measurement to be taken as overall width and height of ventilator. No shutter or frame to be measured separately. All necessary accessories including tinted glass required for assembling and fixing window at proper place complete are deemed to be inclusive. |
| 42 | S&F 100mm long Stainless steel Butt hinges (ISI marked) with SS screws complete all as specified & directed. |
| 43 | S & F 125 mm long extruded aluminium alloy handles anodised fabricated type complete all as specified & directed. |
| 44 | S & F 150 mm long extruded aluminium alloy handles, cast type complete all as specified & directed . |
| 45 | S & F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed . |
| 46 | S & F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 47 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed |
| 48 | S & F vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including waste coupling, brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified & directed. |
| 49 | S&F for single piece vitreous china wash down water closet pan of padestal pattern wihite with P or S trap including plastic water closet seat cover, white, clouse pattern with flat bottam, and cover and mild steel chromium plated or aluminised hinging device jointed in white cement complete all as specified and directed. Make: Hindware Cat part No 20125 Boul for Coupled WC with Cistern fittings or equivlent make as approved by Engr-in-Charge. |
| 50 | S & F vitreous china couter top over shape wash hand basin of, size 536x435 mm including fixing with cement mortar 1: 3 with waste coupling complete all as specified and directed. |
| 51 | S & F vitreous china Squatting pan, 'Orissa' pattern, Size 580mm X 440mm ,with integral foot rests (excluding flushing ciestern and flush pipe) incl necessary cement concrete bedding complete all as specified & as directed . |
| 52 | S &F Vitreous China urinals, half stall type, flat back, white colour with grating and union for discharge pipe ( back or corner wall type) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal with plugs with 60mm long brass screws, pointing around urinal back in cement with and including and fixing complete all as specified and as directed. |
| 53 | S & F viterous china urinal partition slab 310mm X 700mm all respect complete all as specified and as directed. |
| 54 | S & F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60gm) all respect complete all as specified and as directed. |
| 55 | S & F waste coupling of PTMT (half or full threded) minimum weight 45 gms for 32mm dia discharge pipe all respect complete all as specified and as directed. |
| 56 | S & F PVC connections 15mm size with PTMT nuts of length 450 m complete all as specified and as directed. |
| 57 | S&F brass chromium plated bottle trap of dia 32 mm for wash basin with inlet and outlet screwed for pipe or connection including necessary packing union and cap and fixed complete all as specified and as directed. |
| 58 | S & F soap dish chromium plated standerd quality fixed on wall with brass screw complete all as specified. |
| 59 | S & F 15mm bore pillar tap cast copper alloy with capstan head, chromium plated concealed screwed down high pressure with or without hot or cold with long shunk screwed shanks and fly nuts screwed for iron pipes and connecting to water pipe line complete all specified and directed. |
| 60 | S & F 15mm bore stop valve/angle valve, cast copper alloy chromium plated fancy type screwed down high pressure, with crutch or butterfly handle for 15 mm bore pipe or for unions complete all specified and directed. |
| 61 | S & F 15mm bore stop valves/angle valve of cast copper alloy, concealed, screwed down, high pressure with crutch or butter fly handle, chromium plated, with long shank and cup fixed complete all as specified. |
| 62 | S & F Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs complete all as specified and as directed. |
| 63 | S & F brass chromium plated bottle trap of dia 32 mm dia for wash basin with inlet and outlet screwed for pipe or connections including necessary packing union and cap and fixed complete all as specified and as directed.Make : (Prayag CAT No. 327) or equivalent as per approved product list |
| 64 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 65 | S & F 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with PVC mouldings frame fancy type and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 66 | S & F 150mm bore PVC (SWR) pipes single socketed with rubber joint, in any length, laid in trenches or in floors / fixed to walls complete all as specified. |
| 67 | S & F 110mm bore PVC (SWR) pipes single socketed with rubber joint, in any length, with rubber ring joints, laid in trenches or in floors complete all as specified. |
| 68 | S & F 75mm bore PVC (SWR) pipes single socketed with rubber joint, in any length fixed to walls / floors or in trenches complete all as specified. |
| 69 | S & F 110mm bore PVC (SWR) bend suitable for pipe complete all as specified. |
| 70 | S & F 75mm bore PVC (SWR) bend suitable for pipe complete all as specified. |
| 71 | M & L 75mm dia PVC(SWR) floor trap, outlet, plain with grating including jointing with solvent cement complete all as specified. |
| 72 | S & F 15mm bore galvanised iron water tubes medium grade with all fitting and fixed to wall, ceiling or laid in floor and trench complete all as specified. |
| 73 | S & F 20mm bore galvanised iron water tubes medium grade with all fitting and fixed to wall, ceiling or laid in floor and trench complete all as specified. |
| 74 | Cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1½ round or 3/4 Section) in cement concrete 1:2:4 type B. 1 smooth finished and reforming benching as required |
| 75 | S & F GI snap grid frame work for false ceiling all as specified with Hangers 4mm cia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including 4 mm thick pre-painted decorative Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed |
| 76 | Providing & fixing false ceiling with semi perforated 12 mm thick micro tegular edged or 10 mm thick square edge at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595mm X 595mm of approved texture design and pattern having moisture content less than 2%, humidity resistance of 99%, NCR 0.50 to 0.75 as per IS 8225 : 1987, non-combustible as per BS 475 (Part-IV) 1970 and light code description Unit Rate No. 429, Sub Head 26.0 – New Technologies and Material, reflectance of 85% minimum, laid in true horizontal level, suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 gms/sqm including both sides) comprising of: Main T runner of size 15 × 32 mm, length 3000 mm. Cross T of size 15 × 32 mm, length 1200 mm. Secondary intermediate cross T of size 15 × 32 mm, length 600 mm. To form grid module of size 600 × 600 mm, suspended from ceiling using galvanized metal sheet item (galvanized @ 80 gms/ sqm), i.e. 50 mm long, 8 mm outer diameter M-6 fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length, and L-shape level adjusters of size 85 × 25 mm, galvanized iron perimeter wall angle of size 24 × 24 × 0.40 mm, length 3000 mm, to be fixed on perimeter of wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long drywall screws. The work shall be carried out as per specification, drawing and as per direction of Engr-in-Charge |
| 77 | M & L for preparation of new plastered surface surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 78 | M & L for applying two coats of cement base paint over one coat of primer on plastered surfaces of walls including preparation of new or previously untreated surfaces all as specified and directed |
| 79 | Preparation of new steel surfaces surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer of surfaces complete all as specified. |
| 80 | M & L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coat of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 81 | E & M Division items |
| 82 | M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty PVC conduit including all accessories etc ISI marked, with modular metal flush box suitable for fixing switches, sockets and regulators including PVC insulated stranded FRLSH copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One light point controlled by one switch. |
| 83 | M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded FRLSH copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One fan point/exhaust fan point controlled by one, one way switch . |
| 84 | M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded FRLSH copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on the same board. |
| 85 | M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded FRLSH copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on independent board. |
| 86 | M & L for point wiring with FRLSH stranded copper conductor 2.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded FRLSH copper conductor 2.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for 3 pin, 15 Amp socket outlet, independent |
| 87 | S&F switch piano flush type button single pole one way 5 Amps all as specified and directed. |
| 88 | S&F socket outlet 2 in 1, 3 pin 5 Amp flush type all as specified and directed. |
| 89 | S&F switch socket combination 5 in 1, 3 pin 5/16 Amp flush type with all as specified and directed. |
| 90 | S&F ceiling rose surface bakelite with three terminals all as specified and directed |
| 91 | S & F LED light fitting 1 X 20W, 220V, AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.. |
| 92 | S & F LED light fitting 9W/10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 93 | S&F bldg security light, LED luminaire 25 watt IP 66 LED lamp, driver etc with all accessories fixed on wall, pole etc complete all as specified and directed. |
| 94 | S&F Metal body exhaust fan 250mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with flexible copper cable including making holes on the wall and making good to the disturbed surfaces complete all as specified and as directed. |
| 95 | S&F sheet metal enclosure powder coated single phase DB for fixing of MCBs, 8 way double door with Aluminum bus bar 100 Amp including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed. |
| 96 | S&F MCB SPN of capacity 40-63 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 97 | S&F MCB SP of capacity 6-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 98 | Supply, laying, jointing and testing in trenches or fixing on wall or passing through pipe LT XLPE cable 1100 volts grade heavy duty Insulated multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and over PVC sheathed cross sectional area 10sqmm 4 core conforming to IS-7098 (ParI)-1988 as per specification properly clamps on wall and connection at end point with all legs glands etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender