Tender For Welcome Maintenance Of E/M And B/R Works For Omq At 8Fbsu, Af
Tender Value
25 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
20 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance Of E/M And B/R Works For Omq At 8Fbsu, Af
BOQ
| Sl. No. | Item Description |
| 1 | B/R PORTION |
| 2 | M&L preparation of old surfaces of walls, plastered or un-plastered by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss & efflorescent salts, removing all vegetation growth and trading oil and greasy spots and applying one coat of white wash on old white washed surfaces of walls complete all as specified. |
| 3 | All as per item No.01 above but on Ceiling Surface, complete all as specified and directed. |
| 4 | M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes, cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of distemper oil emulsion on old prepared surfaces of walls complete all as specified and directed. |
| 5 | M&L for preparation of old decorated plastered or unplastered surfaces of ceiling, cornices etc and applying one coats of oil bound distemper complete all as specified and directed. |
| 6 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed. |
| 7 | Rendering 10 mm thick in cement mortar 1:6 on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 8 | M & L for applying of Birla/JK white wall putty approx 3 mm thick in two layer as per manufacturer's instruction including preparation surface and make the surface smooth by rubbing with sand papers etc complete all as specified and directed. |
| 9 | M&L for preparation of newly plastered surface on walls and applying two coats of oil bound distemper including primer, complete all as specified and directed. |
| 10 | M&L for complete removal of existing treatment by scraping, washing, rubbing down or stopping distempered or painted surfaces etc of walls plastered or un-plastered & removing all vegetation growth, cleaning and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper over a coat of primer, complete all as specified and directed. |
| 11 | M&L for preparing of old painted wooden surfaces over 10 cm width or girth and making good including knotting and stopping, cleaning etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 12 | M&L for preparing of old painted steel surfaces over 10 cm width or girth and making good with & including by necessary red lead putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint on old prepared surfaces of steel, complete all as specified and directed. |
| 13 | S&F in repair 20 mm dia curtain rails of stainless steel with fixing brackets, stops, rollers, funnels etc complete. |
| 14 | Prelaminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with all around 6 mm thick teak wood beading as in cup board shutters, shelves, palmet boxes etc, fixed to timber frame including dismantling of old particle board complete all as specified. |
| 15 | S&F 40 mm dia, brass, knobs for cupboard fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 16 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised with width of flap (when open) 30 mm, complete all as specified and directed. |
| 17 | S&F for ball catcher for cupboard/ cabinet etc, complete all as specified and directed. |
| 18 | S&F in repair bathroom Cabinet PVC /ABS body of size 350x450mmx125mm of approved quality. |
| 19 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 20 | M&L for Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 250 & n exc 500 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc., complete all as specified and directed. |
| 21 | M&L for Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 500 & n exc 1000 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc., complete all as specified and directed. |
| 22 | M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips, complete all as specified and directed. |
| 23 | M&L for 3mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips, complete all as specified and directed. |
| 24 | S&F in repairs Toilet Paper Holder stainless steel fixed to wall al as specified and directed by Engr-in-Charge. |
| 25 | S&F in repairs stainless steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall all as specified and directed by Engr-in-Charge. |
| 26 | S&F in repairs Corner Glass Shelf of size 320 x 320 mm with silver chromium finished border oval range premium quality all as specified and directed by Engr-in-Charge . |
| 27 | S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm, complete all as specified and directed. |
| 28 | S&F in repair stop valve/angle valve, fancy type, chromium plated, cast copper alloy screwed down, high pressure, with crutch or butterfly handle of 15 mm dia. screwed both ends for iron pipe or for unions and fixed, all as specified & directed. |
| 29 | S&F in repair PVC valve less symphonic action type low level Flushing Cistern 10 Ltr capacity white with all internal fittings and handles knob/push including brackets PVC connection 45 cm long including nut and PVC washer at both ends with brass chromium plated coupling 32 mm bore including 32 mm bore PVC long bend flush pipe 90 cm long, complete all as specified and directed. |
| 30 | S&F in repair Vitreous China wash down water closet (pedestal pattern), White/coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and chromium plated jet including PVC connection, fixed complete including demolition of old unserviceable WC and provision of plain cement concrete M-15, type B-I, using 20 mm graded crushed stone aggregate, fixed in repairs complete all as specified and directed. |
| 31 | S&F in repairs vitreous china, white, wash hand basin, flat back size 550x400 mm including MS brackets including cutting for and pinning in, including waste fitting, brass, chromium plated with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC connection and 15 mm size with CP brass coupling nuts of length 450 mm, trap, grating and union for discharge pipe, chain and plug and porcelain stopper and all accessories fixed in repair, complete all as specified and directed. |
| 32 | S&F in repair wall mixture for mixing (Hot and Cold) 15 mm bore chromium plated cast copper alloy with capstan head screwed for iron pipe fixed, complete all as specified and directed |
| 33 | S&F in repair sink mixture for mixing (Hot and Cold) 15mm bore chromium plated cast copper alloy with capstan head screwed for iron pipe fixed complete all as specified and directed. |
| 34 | S&F in repair Brass CP central hole wash basin mixer for hot & cold for 15mm dia complete fixed to connection, complete all as specified and directed. |
| 35 | S&F in repair CP Bib tap, 15mm dia, cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or brass ferrule and fixed in repair all as specified screwed for iron pipe or brass ferrule, complete all as specified and directed. |
| 36 | S&F in repair 15 mm bore PVC connection with PTMT of length 450 mm, complete all as specified and directed. |
| 37 | S&F in repair CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 38 | S&F in repairs Health Faucet CP with rubbit cleaning system, 1.25 m long PVC flexible tube & ABS wall hook, complete all as specified and directed. |
| 39 | S&F PVC (SWR) floor trap of 110 mm dia, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 40 | S&F PVC (SWR) bends any radius of 75 mm bore, complete all as specified and directed. |
| 41 | S&F CP grating 125 mm dia as suitable to existing trap as per requirement, complete all specified and directed. |
| 42 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all specified and directed. |
| 43 | M&L coloured/ printed non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 but not exc 0.16 Sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15 mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all specified and directed. |
| 44 | M&L for 18-20 mm thick granite stone (slab) of any colour/ type, (table rubbed and polished) work as in floors/ vertical surfaces, cooking platforms and like, set in neat cement including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15 mm thick screed bed in cement mortar (1:6) laid and jointed with gray cement slurry mixed with pigment, complete all specified and directed. |
| 45 | Dismantling of plain or corrugated steel sheeting of any gauge, thickness etc in roof coverings/ cladding/ eave etc for fixing of water storage tank including refixing plain or corrugated steel sheeting, any gauge, thickness, roof coverings with two corrugation side lap fixed with L' type or 'J' type or cranked hooked bolts and dome type bitumen washers, complete all as specified. |
| 46 | S&F 500 Litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position including dismantling PVC water storage tanks of capacity more than 250 to 500 Litres capacity, complete all as specified and directed. |
| 47 | S&F 1000 Litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position including dismantling PVC water storage tanks of capacity 500 Litres capacity, complete all as specified and directed. |
| 48 | S&F in repair ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or ferrule 20 mm bore fixed, complete all as specified and directed |
| 49 | E/M PPORTION |
| 50 | Taking down carefully aluminium/ copper point wiring (light, bell, fan, socket) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, holder, fittings and terminal box sheets complete, stacking material at site and making good the disturbed surface of walls/ floors to match with existing surface, complete all as specified. Please Enable Macros to View BoQ information |
| 51 | Taking down carefully aluminium/ copper point wiring (light, bell, fan, socket) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, holder, fittings and terminal box sheets complete, stacking material at site and making good the disturbed surface of walls/ floors to match with existing surface, complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender