Tender For Providing And Laying Of 4 I/D & 6 I/D D.I. Water Supply Pipe Line Near Slaughter House And From Plot No. 136-140/1 To Plot No. 136-140/99 To Overcome The Low Pressure Problem In Distribution Pocket Of Industrial Area Phase-I, Chandigarh (C
Tender Value
14.60 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
2 days left
EMD
29205
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Laying Of 4 I/D & 6 I/D D.I. Water Supply Pipe Line Near Slaughter House And From Plot No. 136-140/1 To Plot No. 136-140/99 To Overcome The Low Pressure Problem In Distribution Pocket Of Industrial Area Phase-I, Chandigarh (Ch. To Capital Head : Augmentation Of City W/S System). Approx. Amount : Rs. 14,60,123/- Earnest Money : Rs. 29,202/- Time Limit : 02 Months
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soils. (DSR No. 2.8.1) |
| 2 | Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : (DSR No. 18.72) |
| 3 | 100 mm dia Ductile Iron Class K-7 pipes (DSR No. 18.72.1) |
| 4 | 150 mm dia Ductile Iron Class K-7 pipes (DSR No. 18.72.2) |
| 5 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket : (DSR No. 18.70) |
| 6 | 100 mm dia pipes @ 5.5 mtr of pipe length (DSR No. 18.70.1) |
| 7 | 150 mm dia pipes @ 5.5 mtr of pipe length (DSR No. 18.70.2) |
| 8 | Labour for cutting C.I. pipe with steel saw: (DSR No. 18.83) |
| 9 | 100 mm diameter C.I. pipe (DSR No. 18.83.2) |
| 10 | 150 mm diameter C.I. pipe (DSR No. 18.83.4) |
| 11 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding in 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and for all lift. (DSR No. 2.25) |
| 12 | Carriage of material by Mechanical Transport including loading, unloading and stacking of earth upto 3 Km. (DSR No. 1.1.2) |
| 13 | Supplying and filling in plinth with sand under road cut, floors, including watering, ramming, consolidating and dressing complete (Sand will be taken from C&D Waste Plant M.C., Chandigarh. (NSI) |
| 14 | Dismantling manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: bituminuous road (DSR No. 15.43.2) |
| 15 | Providing and laying of S&S CI standard specials such as tees, bends, collar etc. suitable for flanged jointing below 300mm dia. (NSI) |
| 16 | Supplying and pouring of pig lead 99.9% pure for above said C.I. specials of make Hind Zinc/Vedana (NSI) |
| 17 | Supplying, laying, jointing & testing, commissioning of D.I. sluice valve Resilient seated including the cost of rubber packing, nut & bolts, carriage loading unloading complete in all respects make VAG/AVK/IVC/Kirloskar/Sigmaflow. (NSI) |
| 18 | 100 mm dia i/d |
| 19 | 150 mm dia i/d |
| 20 | 200 mm dia i/d |
| 21 | Constructing brick masonry chamber of size inner (3' x 3' x 4') for sluice valve including excavation 1st class brick work in cement mortar 1:6 (1 cement : 6 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:6 (1 cement : 6 coarse sand), foundation concrete 1:5:10 mix (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) complete in all respects to the entire satisfaction of EIC. (NSI) |
| 22 | Providing and fixing of RCC cover 1:2:4 of 3\\" thickness including cost of steel winding wire etc. complete in all respects (in two parts). (NSI) |
| 23 | Labour for making arrangent for connection with existing line including cost of execution, cutting, jointing, alignment, dewatering, caution board etc. complete in all respects: (NSI) |
| 24 | Existing 4\\" i/d to Proposed 4\\" i/d |
| 25 | 8\\" i/d to Proposed 4\\" i/d |
| 26 | 6\\" i/d to Proposed 6\\" i/d Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender