Tender For Special Repair/Replacement Of Street Lights, Security Lights, Rusted Steel Tubular And Vintage Plain Cement Concrete Poles And Connected Items At Various Locations At Dinjan Mil Stn
Tender Value
1.11 Crore
Estimated cost
Bid Submission
02 Sep 2026
9 days left
EMD
1.86 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/Replacement Of Street Lights, Security Lights, Rusted Steel Tubular And Vintage Plain Cement Concrete Poles And Connected Items At Various Locations At Dinjan Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling /uprooting of LT unserviceable pre-stressed concrete /steel poles of any size and shape and including taking out dismantled portion of poles embedded in ground after necessary demolition of concrete foundation and making good disturbed ground surface properly and disposal thereof complete all as specified and as directed.Note:- Earth work for taking out poles shall be measured and paid separately under relevant item of this Schedule. |
| 2 | M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) including two coats of aluminium paint over a coat of primer except the planting depth which shall be painted with black bituminous paint including writing pole number using suitable paint complete all as specified and as directed. Foundation should be as per zonal approved TD drawing No TD/EM/9, Sheet No 1/1 Note : (i) Excavation and earth work, PCC filling shall be measured and paid separately.(ii) Foundation should be as per zonal approved TD drawing No TD/EM/9 Sheet No 1/1(iii) Rates f steel tubular poles also include provision of finial and cast iron base plate fixed to poles finials and base plate shall be of cast iron and confirm to the details given in fig 3 and 4 of IS : 2713-Part 1 to 3-1980.(iv) The rates also include drilling of holes in steel tubular poles for fixing 'D' iron clamps and hooks for continuous wire, G.I earth wire casing coping etc. to the required size and number. (v) The sections of the pole in outer dia & thickness shall be as: - 165.1 X 4.5mm for 5 meter length from bottom then 139.7 X 4.5mm for next 2m length & 114.3 X 3.65 for remaining length.(vi) Approx Wt of pole shall be 147 kg.(vii) Tubes making poles shall be out of steel conforming to minimum grade of YSt 240C (with minimum tensile strength of 410 MPa) |
| 3 | M&L for cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed. |
| 4 | M&L for cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in pole foundation, filling and mass concrete complete all as specified and as directed. |
| 5 | M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping of pole including necessary form work for fair finish surfaces complete all as specified and as directed |
| 6 | Supply & Fixing of 60W All in One Hybrid Solar Street Light, 50,000 LED burning hours, Panel 90 Wp Monocrystalline, AC input Voltage 140V-280V, System efficacy >150 LPW, MPPT,Intelligent Fix Dimmig/PIR Motion Dimming , 42 Ah LiFePO4 12.8V DC Battery,CCT 5700 ANSI, CRI > 70, over charge, deep discharge, reverse polarity and over temperature protection, 24 hours autonomy, 4kV Internal with Driver +10KV SPD, Driver Efficiency > 85%, O/P Short Circuit Protection, O/P Open Circuit protection, OVP > 320 V AC, Housing Aluminium extruded body, externally accessible CCU and battery, IP65, Suitable for Pole top OD 70-80mm, Mounting Pole top, side/center mounting, Certification LM79 (NABL), TTR, BIS for Solar Panel, BIS for Battery, LM80, manual cut off facility, including clamp, fitting and connection on existing pole as per site requirement complete all incl dismantling old U/S street lights as specified and directed. |
| 7 | Supply and fixing LED street light fitting 60Watt 230V AC outdoor type with high pressure die cast aluminium housing and heat resistant with system lumen efficiency not less then 130lm/w, lumen output less than 7800 lumens, CCT 5700 K, CRI ≥ 70, IP 66 protection, IK 08 impact resitance, isolated constant current driver with PF ≥ 0.95, and THD upto10%, operating on 140-270 V AC, 50 Hz supply, Lens bean angle T2 with inbuilt surge protection of 6 KV internal & SPD upto 10 KV, LED life expentancy upto 50000 burning hrs, product warranty of 05 yrs all as specified. |
| 8 | Supply & installation, testing and commissioning of symmetric type Galvanized steel high mast lighting system of 12 meter in length in two section, 3 mm & 4 mm section thickness, top dia 150 mm, bottom dia 360 mm, with AISI 3161 steel wire rope 7/19, 6 mm dia system 2 for wich and 3 for lantern carriage, including of timer pannel , complete all as specified and as directed including following :-(a) Sustain upto wind speed of 180 Kmph(b) Non Flame Proof integral Motor.(c) Movable lantern carriage.(d) Double drum Winch.(e) 6 mm 316 Grade S S Hoisting Ropes of 7/19 construction.(f) Trailing Cable –1 per mast (5 Core 2.5 Sq mm)(g) Lightning Finial , Anchor Plate & Template(h) Accessories like Plug and Socket, GI Nut bolt with double washer,wiring cable for fixture, flexible conduit, copper lug, PVC tape, Cable tie etc(j) Foundation Bolt & Nuts T & P for fixing with its allied accessories as per OEM. System is suitable for loading 08 nos 350 w LED lights(k) Installation, Testing & Commissioning, Casting of foundation for High Mast & Panel @10T/sqm soil bearing as per OEM.(l) Earthing for High Mast 02 nos each and Timer panel, Power Supply up to the Panel & Cable laying, Providing Power Cable from High Mast to Panel.(j) LED Aviation light 01 nos each Contd in next row Please Enable Macros to View BoQ information |
| 9 | Supply & installation, testing and commissioning of symmetric type Galvanized steel high mast lighting system of 12 meter in length in two section, 3 mm & 4 mm section thickness, top dia 150 mm, bottom dia 360 mm, with AISI 3161 steel wire rope 7/19, 6 mm dia system 2 for wich and 3 for lantern carriage, including of timer pannel , complete all as specified and as directed including following :-(a) Sustain upto wind speed of 180 Kmph(b) Non Flame Proof integral Motor.(c) Movable lantern carriage.(d) Double drum Winch.(e) 6 mm 316 Grade S S Hoisting Ropes of 7/19 construction.(f) Trailing Cable –1 per mast (5 Core 2.5 Sq mm)(g) Lightning Finial , Anchor Plate & Template(h) Accessories like Plug and Socket, GI Nut bolt with double washer,wiring cable for fixture, flexible conduit, copper lug, PVC tape, Cable tie etc(j) Foundation Bolt & Nuts T & P for fixing with its allied accessories as per OEM. System is suitable for loading 08 nos 350 w LED lights(k) Installation, Testing & Commissioning, Casting of foundation for High Mast & Panel @10T/sqm soil bearing as per OEM.(l) Earthing for High Mast 02 nos each and Timer panel, Power Supply up to the Panel & Cable laying, Providing Power Cable from High Mast to Panel.(j) LED Aviation light 01 nos each Contd in next row Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender