Tender For Providing Additional 1 No 26 Persons Bed Cum Passenger Lift And 1 No 240Kgs Dump Lift Arrangements To The 50 Bedded Critical Care Wing And Mch Wing In Government Hospital At Sivakasi In Virudhunagar District.
Tender Value
61.40 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
40700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Virudhunagar → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Additional 1 No 26 Persons Bed Cum Passenger Lift And 1 No 240Kgs Dump Lift Arrangements To The 50 Bedded Critical Care Wing And Mch Wing In Government Hospital At Sivakasi In Virudhunagar District.
BOQ
| Sl. No. | Item Description |
| 1 | Design, Engineering, supply, fabrication, erection, testing, commissioning and handing over of 1No 26 persons capacity Gearless passenger cum bed lift with machine room, disable friendly, fire rated doors as per the following Technical specifications for (G+6) as per is standards upto date. |
| 2 | Technical specifications:1. Location: Critical care unit Building at Sivakasi in Virudhunagar District.2. No of Lift : 1 No3. Type of lift : passenger cum bed lift.(1768Kgs)4. Capacity of lift : 26 persons capacity Gearless passenger cum bed lift 5. Speed : 1.0 M / Sec6. Type of Drive: Specific variable voltage variable frequency V3F drive with enhanced ride comfort and near Zero leveling functions. |
| 3 | 7. No. of floors: (ground + 6 floors) 8. Total Travel : 22.8mtrs Travel.9. Leveling Accuracy: High level accuracy with smooth & jerk free stopping10. Construction of Car: 18SWG High quality S.S car Neat hairline finish, S.S hand rail, SS floor line finish, Perspex false ceiling, stretcher impact protection.11. Position of machine: Directly above the lift well. 12. No. of landing entrance: one in front 7 Nos 13. No. of car entrance: one in front only14. Car entrance door: power operated V3F drive side opening sliding 18SWG stainless steel hair line finish. |
| 4 | 15. Landing entrance door: power operated V3F sliding, opening 18SWG stainless steel hair line finish with provision for emergency key 16. Lift well existing: 3000mm x 2400mm 17. Lift pit depth available : 1600mm18. Car size (Clear inside): 1600mm (wide) x 2400mm (Depth) 19. Car clear opening: 1200mm width x 2000mm height 20. Lift machine room available: 4350mm width x 5500mm 21. Power supply: 400/440 3 phase, 50 Cycles/sec A.C. supply for power and 230 V, 50 HZ, single phase, supply for lighting. |
| 5 | 22. Control: Micro processor based simplex selective collective simplex23. Car fittings: sleek LED light fitting with 300mm sweep cabin fan24. Lift well: R.C.C. construction with brick masonry.25. Indication: UP/Down digital direction and position indicator for all landing and in car (25mm Height, seven segment Digital Floor position indicator scrolling type)26. Emergency Alarm Bell: Battery operated alarm bell to be provided with Automatic charging device.27. Emergency light: Battery operated light to be provided with Automatic charging device.28. Fireman’s switch: To be provided at ground floor29. Minor builders work: to be provided by lift contractor.30. Scaffolding: to be provided by lift contractor |
| 6 | 31. Sill angles and facia plates: to be provided by lift contractor32. Steel for lift machinery: to be provided by lift contractor33. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by the lift contractor during the guarantee period of one year.34. Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, invertor, under voltage protection system etc., complete with all accessories. |
| 7 | 35. Provision of intercom with phone: To be provided by lift contractor 3 points EPABX system at three places vide 1) inside the car 2) Head room 3) at ground floor attender room36. Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor.37. Floor annunciator with music, included |
| 8 | 38. Special features: a. Infra red door sensor with full height screen.b. Tubular S.S hand rail in cars.c. Voltage stabilizer for circuit control.d. Stainless Steel signal fixtures.e. Vendal proof S.S. Button with S.S. coverf. SS hairline finish door frames for landing doors.g. VF door Register signalh. Call Register signal |
| 9 | i. Stainless steel facia plate for car operating panel and landing fixtures.j. Steel ladder for machine room and ladder for lift Shaft pit,k. On – Off switch for fan and lightl. Over load warning indicator With audio announcement.m. Fall width half height rear panel mirror. |
| 10 | 39. Provision of architraves covering all three sides up to a width of 300 decorum sheet of plywood with TW frame with aluminum beading architraves should also cover the thickness of still level door frame at the landing and indicator boxes at all landings. 40. Other standard features: Voltage stabilizer for control units, Over speed governor, phase failure and phase reversal relay alarm bell, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, single reduction worm gear, electromagnetic brake with compression springs car safety gears buffer, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limits switch, main suspension ropes counter weights lifting hoist for mounting the machineries. |
| 11 | 40. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period not less than one year. 42. Site testing in accordance with IS 14665 should be carried out at the time of handing over. Necessary spares and tools required for the maintenance for a period of one year41. Supply of operation and maintenance manual with Necessary tools for Operation. The list of tools required should be detailed by the contractor in a separate sheet duly signed by contactor. (Johnson/KONE/ OTS) (SR) M 2373 + 4,50,000/- for additional three floors (Rs.1,50,000 for floor) as per works. |
| 12 | Design, Engineering, supply, fabrication. Erection, Testing commissioning and handing over of 1 No 240Kgs Dump Lift MRL as per is standards upto date the following Technical Specification. |
| 13 | 1) Number of Lifts/Type of Lift : One / Dump Waiter service. 2. Load/speed : Weight (240 Kgs) 1 Mtr.per second |
| 14 | 3. Drive: MICRO PROCESSOR BASED VVVF |
| 15 | 4. Travel /PIT 1200mm |
| 16 | 5. No.Of floors: (G +3) |
| 17 | 6. Floor Display chair : 0,1,2,3 |
| 18 | 7. No.of Landing Entrances : 4 (G+3) |
| 19 | 8. Number and position of car Entrances: 1 (One) In front only. |
| 20 | 9. Position of Machinary : Directly above the Lift well - Geared. |
| 21 | 10. Size of Lift well : 1500x1200(mm wide *Mdepth *MM Height * MM E Value) |
| 22 | 11. Lift car Inside size: as per standards |
| 23 | Lift clear opening of gates/doors/Lintel/Ec:1000mm. |
| 24 | 12. Type of Design of Lift car : Pre-Coated steel -Grey & Red\\" Ivory & Yellow \\"Ivory &Green\\" Subject to Avilability. |
| 25 | 13. Additional care space- |
| 26 | 14. Car ceiling-car Floor : Not applicable - Not Applicable. |
| 27 | Car Fittings:Bulk head fitting & Not applicable |
| 28 | 15. Type of car Front Entrance Protection: No Door, i)Land Entrance Protection (0,1,2,3): COLLAPSIBLE GATE - M.S. Painted - Black. |
| 29 | 16.Landing Door Frame (0,1,2,3) : M.S. Painted -Client Choice. |
| 30 | 17. Type of Control System : External Extended Push Buttons with/Without ATTET. |
| 31 | 18.Electric supply:AC 3 Phase,50 Cycles,415Volts+-10% |
| 32 | 19.Car Display : No Display |
| 33 | 20. Floor Display.0,3,2,1. :Digital Display Vertical. |
| 34 | 21.Minor builders work:to be Provided by Lift Contractor. |
| 35 | 22.Scaffolding:Included in this Scope. |
| 36 | 23.Still angles and facia plates:Included in this Scope. |
| 37 | 24.Steel for lift machinery:Included in this Scope |
| 38 | 25.Servicing and maintenance:Free comprehensive servicing and maintenance should be provided by the lift contracter during the guarantee period of one year. |
| 39 | 26.Lift License:Preparation of Drawing,payment of charges to CEIG safety certificate as per lift act should be done by lift contracter. |
| 40 | 27.Special features: a.Up and Down arrows in landing only. |
| 41 | b.Steel cubical for controller. |
| 42 | c.Lift duty motor of adequate capacity,reduction warm gear electromagnet break with compressor springs,over speed governor,phase failiure & Phase reversal relay alarm bell T-guide backets of car and counter weight Rubbes padding under Winding units car safety gears buffers electro mechanical door lock,emergency key,side supporting angle,motor over load protection devices final limit switch,main suspension ropes,counter weights lifting hoist for mounting the machineries. |
| 43 | 28.Guarantee:Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period not less than one year. |
| 44 | 29.Site testing in accordance with IS 14665 should be carried out at the time of handing over. |
| 45 | 30.Supply of operation and maintenance manual and Necessary tools for Operation and a set of spare required for 1 year.(Dump lift should be Johnson/Kone/OTS/Eq) |
| 46 | Supply and clarnping of 3 1/2 x35 sq.mm PVC LTUG armoured LTUG cable on post or on wall MS Clamps. |
| 47 | Supply and fixing of brass cable gland for 3 1/2 x 35sqmm PVC armoured LTUG cable with earth connection. |
| 48 | Supply and providing cable and Termination of 31/2 x 35 sq.mm PVC LTUG aluminium armoured with necessary aluminium cable sockets by crimping etc. with electrical connection complete cable. |
| 49 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End |
| 50 | Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed portion. |
| 51 | Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. |
| 52 | Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection. |
| 53 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection. |
| 54 | GST @ 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender