Tender For Upgradation Of Boundary Wall And Fixing Of Grill At Kankali Tila Jail And Choubara Mound, Mathura
Tender Value
35.65 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
18 days left
EMD
89146
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Boundary Wall And Fixing Of Grill At Kankali Tila Jail And Choubara Mound, Mathura
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle, grass, small trees and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared complete etc. complete as per direction of site in-charge. |
| 2 | Taking out old M.S. iron Grill from brick masonry wall very carefully and stacking of serviceable materials including removal of malwa at suitable place distance within 300mtetc. complete as per direction of site in-charge. |
| 3 | Demolishing brick work in cement mortar manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead etc. complete as per direction of site in-charge. |
| 4 | Earth work in excavation by manual means in foundation trenchesor drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil etc. complete as per direction of site in-charge. |
| 5 | Providing and laying in position cement concrete 1:3:6 (1Cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). of specified grade excluding the costof centering and shuttering etc. complete as per direction of site in-charge. |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation below plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) etc. complete as per direction of site in-charge. |
| 7 | P/L D.P.C. 50mm thick with cement concrete 1:2:4 ( 1 Cement : 2 C. Sand : 4 Stone aggregate 20mm nominal size ) on plinth level etc. complete as per direction of site in-charge. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in above plinth level up to approximate hight 1.00 Mtr. in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) etc. complete as per direction of site in-charge. |
| 9 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead etc. complete as per direction of site in-charge. |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) etc. complete as per direction of site in-charge. |
| 11 | Fixing of old M.S. iron Grill on brick masonry wall very carefully with nut-bolt etc. complete as per direction of site in-charge. |
| 12 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.as per direction of Engineer - in- charge. |
| 13 | 15 mm cement plaster on the brick wall of mix 1:4 (1 cement: 4 coarse sand) etc. complete as per direction of site in-charge. |
| 14 | Repairing, welding & fabrication of old damaged M.s. iron grill & gate with labour & materials etc. complete as per direction of site in-charge. |
| 15 | Steel work welded in built up sections/ framed work In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. complete as per direction of site in-charge. |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :one or more coats on old work (M.S. Grill & gate) etc. complete as per direction of site in-charge. |
| 17 | Finishing walls with water proofing cement paint of required shade : New work (two or more coats applied @ 3.84 kg/10 sqm.) etc. complete as per direction of site in-charge. |
| 18 | Providing and fixing ISI marked flush doo shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws complete etc. complete as per direction of site in-charge. |
| 19 | Dry brick pitching/Khadanja with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including supply of bricks and preparing the surface complete. |
| 20 | Supply & fixing of Red Sand Stone Benches having four legs of size (0.25x0.25x0.37) Mtr. With simple mouling & 8 Cm thick Red Sande Stone Top size 1.55x0.60 Mtr etc. complete as per direction of site in-charge. |
| 21 | Recessed pointing with 1:3 ratio mortar (1 Cement, and 3 c. sand) on R.R. masonry wall including racking out joints, colour matching & supply of materials labour T&P etc.required for proper completion of work etc. complete as per direction of site in-charge. |
| 22 | Removal of Dumped /Collected malwa and debries from the Mound to outside of muncipality limits (as directed by the site - incharge) using manual labour and tractor trolly etc. complete as per direction of site in-charge. |
| 23 | Providing and fixing of MS poles for brick pathway North side to South side high power LED façade wash/spot lights with the height 10 feet above the height of concrete plateform as per design/Site condition along with necessary clamping arrangements. ( Note - dia 76mmx 3.2mm A class, base plate is welded to pole dia 140mmx 4.5mm B class with 4 nos. mounting holes. Integral connector block for loop out is flushed in bottom section of the pole . The contractor shall submit the design of the pole and colour provided by the manufacturer to Engineer in charge for approval and design may very as per the site condition.) etc. complete as per direction of site in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender