Tender For Provn Of Workers Amenity Rooms For Industrial Workers Incl Allied Infra At Mil Stn Unchibassi Under Ge South Pathankot
Tender Value
40 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
3 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Workers Amenity Rooms For Industrial Workers Incl Allied Infra At Mil Stn Unchibassi Under Ge South Pathankot
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-Sep-2026 | Corrigendum1 | Date | 14-Sep-2026 |
| 2 | 14-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) for all kind of soil including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 1.5m in depth to 3 mtr, 1.5 m in width as well as 10 sqm on plan) for all kind of soil including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m to 3mtr, complete all as specified and directed. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) for all kind of soil, including dressingof sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m complete all as specified and directed |
| 4 | M & L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed |
| 5 | M & L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed |
| 6 | M & L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed |
| 7 | M & L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed |
| 8 | M & L Cement concrete (1:3:6) Type C2 (40 mm aggregate) in foundations, filling and mass concrete complete all as specified and directed |
| 9 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed |
| 10 | M&L Design Mix (M-25) using 20 mm graded stone aggregate as in foundation, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement labs, under-reamed piles and mass concrete all as specified and directed |
| 11 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter as rough finished surface of concrete complete all as specified and directed |
| 12 | Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping or columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 13 | Mild steel bars TMT 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping or columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 14 | Mild steel bars TMT 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping or columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 15 | M&L Design Mix (M-25) using 20 mm graded stone aggregate as in for columns, pillers, Piers, posts and struts etc.; complete all as specified and directed |
| 16 | Use & waste for formwork to sides of pillars, posts, struts, piers, columns and stanchions as rough finished surface of concrete complete all as specified and directed |
| 17 | M&L for brick work with old size fly ash bricks having crushing strength not less than 75 Kg/Sqm, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1 : 6 complete all as specified & directed. |
| 18 | M&L for brick work with old size fly ash bricks having crushing strength not less than 75 Kg/Sqm, straight or curved on plan any radius in half brick wall built in cement mortar 1:4, complete all as specified & directed. |
| 19 | M&L Design Mix (M-25) using 20 mm graded stone aggregate as in Beams, cantilevers, lintels, over 1.5 mtr span complete all as specified and as directed |
| 20 | Use & waste for formwork to sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc as rough finshed surface of concrete complete all as specified and directed |
| 21 | M&L Design Mix (M-25) using 20 mm graded stone aggregate as in for chajjas, etc complete all as specified and directed |
| 22 | Use & waste for formwork to chullah hoods, chajjas, troughs and similar items including edges as rough finished surface of concrete complete all as specified and directed. |
| 23 | M & L RCC M-25 using 20 mm graded stone aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 24 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, parapets and similar work; not exceeding 200mm thick (Horizontal or sloping) as rough finished surface of concrete complete all as specified and directed. |
| 25 | M&L for Rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 26 | M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling/Top and sides of chajjas/facia of roof projection incl necessary formwork including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 27 | Rendering 15mm thick in two layers (base layer 10mm & finishing layer 5mm thick) in cement mortar (1:4) using liquid water proofing compound in finishing layer on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement , etc complete all as specified & directed.(Note : WPC shall be measured and paid separately) |
| 28 | Supply only liquid Water Proofing Compound (WPC) |
| 29 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ Ceosetory windows & other frame/Chowkhat of size 65x125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 30 | S&F 100mm long butt hinges medium weight cold rolled aluminium complete all as specified and directed. |
| 31 | S&F 150mm long aluminium, anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 32 | S&F 150mm extruded aluminium alloy handle fabricated anodized complete all as specified and directed. |
| 33 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 34 | S&F floor door stopper of overall length of cover plate 140mm or 150mm alluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 35 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ Ceosetory windows & other frame/Chowkhat of size 45x85mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 36 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter complete all as specified and directed. |
| 37 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type wire mesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified and directed. |
| 38 | S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc with Powder Coating (minimum thickness of powder coating 50 micron & min weight not less than 0.55 kg/Rm). complete all as specified |
| 39 | S & F for powder coated Anodised aluminium window and ventilator shutters, side hung type without or with sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type 100mm long (2 no.) suitable handle (1 no.) include powder coating of any colour (Thickness or powder coating not less than 50 micron) complete all as specified |
| 40 | S &F for 4mm thick selected quality tinted sheet glass including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws etc in aluminum partition / doors / windows / ventilators etc complete all as specified and directed. |
| 41 | S &F for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each etc complete all as specified and directed. |
| 42 | S & F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 43 | S & F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 44 | M&L for preparation of new plasterd surface and applying two coat of oil bound distemper over one coat of primer as on walls surfaces complete all as specified and directed |
| 45 | M&L for preparation of New plastered surfaces of ceiling, facia chhajja including cornices plasters and applying one coat of alkali resistant primer and two coats oil bound distemper on ceiling complete all as specified and directed. |
| 46 | M&L for preparation of new wall including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & gressy spots etc and applying Two or more coats of 100% Premium acrylic emulsion paint (In camouflage pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, etc complete all as specified and directed. |
| 47 | M & L For 16mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 48 | M&L for Hardcore of brocken stone boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 49 | M & L for Machine cut kota stone slab flooring 20-25mm thick over 15mm cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as specified and directed |
| 50 | M & L for 75mm thick Cement concrete typeD-2, 1:4:8 (40mm graded aggregate) in subbase complete all as specified and directed |
| 51 | M&L Non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 52 | M&L for providing glazed ceramic coloured wall tiles of size 450mmx300mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 53 | M & L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in flooring and similar works including finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 54 | M&L liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastometic liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster) |
| 55 | S & F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed |
| 56 | Surface excavation for any type of soil n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed. |
| 57 | M&L 100 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) flooring as in sub base complete all as specified and directed. |
| 58 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required sizeand pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 59 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 60 | S&F GI tubing medium grade Galvanized of size 25 mm bore laid in trenches or ground/ in wall surfaces with and including all fitting complete all as specified and directed. |
| 61 | S&F GI tubing medium grade Galvanized of size 20 mm bore laid in trenches or ground/ in wall surfaces with and including all fitting complete all as specified and directed. |
| 62 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth for laying of cables including getting out in any type of soil complete all as specified and directed. |
| 63 | Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil, complete all as specified and directed. |
| 64 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point. |
| 65 | M&L for cutting existing GI/CI any size of pipe line making new connection for GI pipe including short pieces , inserting tees, bends ,sockets, union etc with existing water line complete all as specified and directed. |
| 66 | S&F stop valve 20 mm dia cast copper alloy screwed on high pressure with crutch or butterfly handle screwed bolts ends, for iron pipe or for union and fixed complete. |
| 67 | S&F stop valve 25 mm dia cast copper alloy screwed on high pressure with crutch or butterfly handle screwed bolts ends, for iron pipe or for union and fixed complete. |
| 68 | Supply and testing of cable XLPE insulated armoured heavy duty electric cable with extruded insulation aluminium counductor, 1100 volts grade of crosssectional area 25 Sqmm 4 Core, complete all as specified and directed. |
| 69 | Supply and ltesting of cable XLPE insulated armoured heavy duty electric cable with extruded insulation aluminium counductor, 1100 volts grade of crosssectional area 10 Sqmm 2.0 Core, complete all as specified and directed. |
| 70 | M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable complete all as specified and directed. |
| 71 | Supply and laying sub class 'B' bricks of old size (230x115x75 mm) or of size locally available , laid along alignment of cable as protection to cable in trenches complete all as specified and directed. |
| 72 | Material and labour for GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed . |
| 73 | Supply, installation, testing and commissioning of LT panel outdoor type suitable for 3 phase 415 Volt of both side opening double door with push type metal lock, hevy duty wide hinges, separate common access cable alley,indoor type made out 3.15 mm thick CRCA sheet with angle iron frame of size 80 x 80 x 6 mm cubical type complete with 4 Nos Aluminium bus bar 100 Amp,MCCB 4 Pole , 63 Amp, 415 V, 25 KA (Thermal magnetic release) Ics=100%Icu and adjustable overload setting 80% to100%- 01 Nos (incommer) & RYB LED indicator- one set with IP 54 as per IS 13947 protection, internal wiring by FRLS grage multi stranded PVC insulated copper conductor of size not less than 10 Sq.mm duly marked with ferrul, incl powder coated painting in inner & outer side,including mking all suitable necessary electrical connection complete all as specified and directed.Note : (i) The panel shall be as per CPRI certificate Note : Rates nclusive of PCC complete(ii) The rates deemed to be inclusive necessary PCC for grouting of panels. |
| 74 | M&L 150mm Reinforced concrete pipes, class NP-2, laid and jointed complete with collarsthick including demolition and breaking up drain pipes in cement mortar including demolition of PCC bedding and hunching complete all as specified and directed |
| 75 | M&L Concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in Cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate for Bore of pipe in 150mm complete all as specified and directed |
| 76 | M&L for brick work in CM 1:4 complete all as specified and directed |
| 77 | M&L for 15mm thick plaster in CM 1:4 finishing even and smooth using extra cement complete all as specified and directed |
| 78 | Material and labour for for precast reinforcement cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:4) complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately). |
| 79 | M&L for PCC 1:2:4 type B2 using 20mm graded aggregate as in surface channel and drains complete all as specified and directed. |
| 80 | S&F for vitreous china wash down water closet (pedestal pattern) white colour including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti syphonic pipe etc including 110mm PVC (SWR) 'P' trap complete all as specified and directed. |
| 81 | S & F for Vitreous China squatting pan of orissa pattern, size 580x440mm white with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (excluding supply but including fixing of flushing cistern and flush pipe) including provision of cement concrete bedding, complete all as specified and as directed. |
| 82 | S & F for PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 60/90 cm long etc, supplied and fixed in repairs, complete all as specified and directed. |
| 83 | S&F in Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass secrews, pointing around urinal in back in cement; fixing automatic cistern with brackts, flush pipe, grating and union for discharge pipe complete all as specified and directed. |
| 84 | S & F of PVC (SWR) multi floor trap with grating including jointing with solvent cement 75mm Bore, complete all as specified and directed. |
| 85 | S & F for Vitreous china oval shaped wash hand basin counter type size 450 x 350 x 150mm including waste coupling and waste pipe complete all as specified and directed. |
| 86 | S & F 5mm thick mirror with 3mm thick plywood backing and wooden/pvc beading all around fixed with screws complete all as specified and directed |
| 87 | S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in trenches/floors/walls for 110 mm bore of pipe fixed in repair complete all as specified and directed. |
| 88 | S & F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in trenches/floors/walls for 75 mm bore of pipe fixed in repair complete all as specified and directed. |
| 89 | S & F for PVC (SWR) floor bend, plain including jointing with solvent cement 110 mm bore in repairs complete all as specified and directed. |
| 90 | S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore in repairs complete all as specified. |
| 91 | S&F Rotational moulded polyethelyne water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethelyne float and fly nuts complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 21, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender