Tender For Estimate For Renovation Of 14 Nos. Rooms (103-110, 114 Plus Drawing Room And 201-204) With electrical installation Works,Furnishing Along With Up-Gradation Of Kitchen At Skylark Tourist Complex, Panipat
Tender Value
1.91 Crore
Estimated cost
Bid Submission
01 Sep 2026
1 days left
EMD
9.56 Lakhs
Bank guarantee accepted
Document Fee
17700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panipat → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Renovation Of 14 Nos. Rooms (103-110, 114 Plus Drawing Room And 201-204) With electrical installation Works,Furnishing Along With Up-Gradation Of Kitchen At Skylark Tourist Complex, Panipat
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Aug-2026 | Corrigendum | Fee | 01-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | P/F door stopper e DSHT-door mounted hanging type comp. in all respects. Make dorset, Godrej |
| 2 | Pdg. rubbing and polishing on Kota stone on existing flooring complete in all respect |
| 3 | P/F 35 mm thick factory manufactured flush doors shutter of ply make with both sides laminated complete in all respect. Make century/green & Merino |
| 4 | Dismantling of wall tiles, scraping of plaster, removing of old G.I and H.C.I. pipes, sanitery wave, CP fittings, door and windows with chowkets and dispose off disablemented material etc. complete in all respect. |
| 5 | provision for shower curtains as per drg. and design including MS Rod |
| 6 | S/E of Fan with existing fan point complete in all respect as per satisfaction of E.I.C. complete in all respect as per satisfaction of EIC.Ceiling decorative fan 1400 mm (Make Havells, Crompton, Bajaj, Orient) |
| 7 | Providing and fixing of paris false ceiling with GI suspenders using fasteners and frame work with GI members using best quality wire meh (23 gauge with 12 squares per inch) with 12 mm POP Plaster approved quality Sakarni odhar shri make cornice, beading, if any including two coats of plastic emulsion after preparation of surface, priming coat to the full satisfaction of the EIC (i) main member will be of 20 gauge @ 2’-0” (ii) secondary member will be of 24 gauge 3’-0” (iii) cutting of holes for electric fitting as per drawing and design (iv)work will be executed as per drawing and design (v) floor area of false will be measured, no extra area will be paid of offsets and Dome etc.) |
| 8 | P/F Nika model-handle 10” CY of SS comp. in all resects, P/F Doorset cylinder of SS both side key 60mm Art. No. CL200 and Doorset Art. No.ML 110 comp. in all respect as per satisfaction of EIC. make Dorset, Godrej |
| 9 | P/F Concealed body for single lever high flow diverter with button assembly, but without exposed parts (ALD-CHR-079N) Complete in all respect (N.S) Make Jaquar, Hindware & Cera |
| 10 | S/I/T/C of 1.5 Ton Split AC 5 Star BEE rating with Auto Start Copper, Condenser rotary, Stablizer free operation, outdoor unit stand, self diagnosis, Dust Filter and 3 meter Installation kit having 1 year warranty on product, 10 year warranty on compressor and 5 year warranty on PCB with required labour and material completer in all respect as per satisfaction of EIC. (Make: Blue Star, Daikin,Loyd) |
| 11 | S/E of CATA exhaust fan with existing fan point complete in all respect as per satisfaction of E.I.C. (Make Havells vento jet , Crompton, Bajaj, Orient). |
| 12 | S/E of 43” QLED UHD Smart TV with required labour and material complete in all respect as per satisfaction of E.I.C. (Make Samsung, Sony, LG) |
| 13 | S/E of mini bar Refrigerator 42L Capacity with required labour and material complete in all respect as per satisfaction of E.I.C. (Make: haier, kelvinator, godrej ) |
| 14 | S/E of mirror light with lamp required labour and material complete in all respect as per satisfaction of E.I.C. (BASIC cost : Rs 2500/- as approved by architect) |
| 15 | S/I/T/C of 9 Fin. 2000 Watt PTC Room Oil Based Heater with Fan including making connection with required labour and material complete in all respect as per satisfaction of E.I.C. (Make Havells, Bajaj, usha). |
| 16 | S/E of strip/Rope light IP65 including driver etc required labour and material complete in all respect as per satisfaction of E.I.C. (make : havells, wipro, Philips) |
| 17 | Deep Cleaning of floors and tiles area complete in all respect as per satisfaction of EIC. |
| 18 | N. S ItemsP/F of Mixie Juicer Grinder of minimum 950 Watt motor with all the accessories, 2 jars, copper motor, rust resistant with warranty of 2 years . complete in all respect as per satisfaction of EIC (Make - Havells, Sujata Model- Hexo GHFJMDHK095) |
| 19 | P/F of Visi Cooler of capacity 380 L with single glassdoor opening, commercial vertical automatic refrigerator, adjustable shelves, wheels/legs (roller), bottle opener with crown holder with 5 star BEE Rating complete in all respect as per satisfaction of EIC (Make - Western, Blue Star, Haier Model- SRC-380-GL) |
| 20 | P/F of wall mounted Instant water heater of 3L capacity, 3 kW with copper heating element, corrosion resistance durability, 5 level safety protection with 2 year product warranty and 5 year tank warranty. complete in all respect as per satisfaction of EIC (Make - Haier, Havells, Jaquar Model- EI3VC1WIP) |
| 21 | S/I/T/C of Advanced R.O with RO plus UF plus TDS control plus UV LED Tank of capacity 8 L and 20 LPH flow with 1 year complete warranty. complete in all respect as per satisfaction of EIC (Make - Kent, Aquaguard, LG) |
| 22 | P/F of Hard Top Deep Freezer (500 Litres) BEE 5 star rating, double door, convertible deep freezer, dual heavy duty condensor, 70mm PUF thickness, 4 years comprehensive warranty . complete in all respect as per satisfaction of EIC (Make - Haier, Blue Star, Western Model- HFC-500DM5 |
| 23 | S/I/T/C of Air Curtain with Sensor and Remote - 410 W (Size 3 Feet) Capacity 0.9 cubic metres, Special Feature Remote Controlled, Product Dimensions 23D x 90W x 22H Centimeters BEE Star Rating 3 Star complete in all respect as per satisfaction of EIC Make: DOLPHY, Eureka, Mitsubishi |
| 24 | S/I/T/C of Air Curtain with Sensor and Remote - 700 W (5 Feet) Capacity 1520 litres, Cooling Power 700 Watts, Special Feature Remote Controlled, Product Dimensions 22D x 150W x 23H Centimeters complete in all respect as per satisfaction of EIC Make: DOLPHY, Eureka, Mitsubishi |
| 25 | P/F Hotel DND sign panel -Dimensions ( L*W* H*) 150*215*15mm millimeter complete in all respect. |
| 26 | P/F MIFARE RFID card lock system Japanse lock motor ( HSN Code-8301409,8523599 and 85235100 ) as per satisfaction of EIC complete in all respect with mechanical key Silver Finish. |
| 27 | NS Item -Supply of LED pendent light with black/white powder coated aluminium housing and pressure die-cast heat sink having high efficiency.THD (10% (minimum 2 Year warranty)complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge. make havells, Phillips, Crompton.(Ref Model: Havells UNECOPENDDLP8WLED830S24BLK-G2)8 W |
| 28 | `NS Item - Supply of LED pendent light with black/white powder coated aluminium housing and pressure die-cast heat sink having high efficiency.THD (10% (minimum 2 Year warranty)complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge. make havells, Phillips, Crompton.(Ref Model: Havells UNECOPENDDLP8WLED830S24BLK-G2)20 W ` |
| 29 | `NS Item -Supply of LED Surface COB Downlighter surface light with black/white powder coated aluminium housing and pressure die-cast heat sink having high efficiency.THD (10% ((minimum 2 Year warranty) complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge make havells, Phillips, Crompton,halonix. (REF MODEL: UNECOSURFDLS8WLED830S24BLK-G2)8 Watt ` |
| 30 | `NS Item -Supply of LED Surface COB Downlighter surface light with black/white powder coated aluminium housing and pressure die-cast heat sink having high efficiency.THD (10% ((minimum 2 Year warranty) complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge make havells, Phillips, Crompton,halonix. (REF MODEL: UNECOSURFDLS8WLED830S24BLK-G2)15 Watt ` |
| 31 | `NS Item -Supply of LED Recessed COB Downlighter energy saving, aesthetically designed, recessed mounted down light with 15° tilt pressure die-cast aluminum heat sink and high efficiency long life COB LED mounted on MCPCB with high efficacy for enhanced lumen output. THD (10% (minimum 2 Year warranty) complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge make havells, Phillips, Crompton, halonix. (REF MODEL: UNECOSURFDLS8WLED830S24BLK-G2)8 Watt ` |
| 32 | `NS Item -Supply of LED Flood light and street light energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. Having Lumen output)= 120 Lumen/per watt and efficiency of 0.9 make havells, Phillips, Crompton, Halonix.100 W street Light ` |
| 33 | `NS Item -Supply of LED Flood light and street light energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. Having Lumen output)= 120 Lumen/per watt and efficiency of 0.9 make havells, Phillips, Crompton, Halonix.200 W Flood Light ` |
| 34 | `NS Item - S/E of heavy duty 380mm exhuast fan (minimum 2 Year warranty) complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge make havells, bajaj, crompton (ref model : havells Turbo force 1P) ` |
| 35 | `NS Item -S/E of BLDC DECORATIVE Ceiling Fan 1200 MM with required labour and material in existing fan point complete in all respect as per satisfaction of E.I.C. (Make Havells enticer BLDC or same in Crompton, Bajaj). ` |
| 36 | `NS Item -S/E of decorative Single wall braket light with lamp required labour and material complete in all respect as per satisfaction of EIC. (Basic cost: Rs. 1000/- as approved by architect). ` |
| 37 | `NS Item -Supply of POST TOP Luminare of 40 W energy saving, environment friendly, long life aesthetically designed with symmetrical light distribution, die-cast aluminium landscape luminaire with high power LED as light source. Unique ring shape LED Engine ensuring soothing, glare free light distribution complete in all respect with required labour and material as per satisfaction of Engineer-in-Charge make havells, bajaj, crompton (Equilant to model : havells IMBOLPT40WLED730SYMPCGRYCMP) ` |
| 38 | P/F of wall mounted water heater of 25L capacity, glass coasted anti rust tank and heavy duty heating element with warranty of 5 years on tank . complete in all respect as per satisfaction of EIC. Make: Haier, Havells, Jaquar, Model- Monza. |
| 39 | P/F of commercial hand blender low noise power-7000 wattage complete in all respect as per satisfaction of EIC. Make Sujata, Havells, Philips |
| 40 | P/F fancy looking mirror (Modigulard) beveled edges comp. in all respect as per satisfaction of EIC...... |
| 41 | P/L vitrified tiles 6`-0` x 4`-0` of Kajaria/Nitco/Johnsons/Somany make premium quality with adhesive 3 mm thick using 5KG adhesive per sqm i/c fitting joints complete in all respect as per satisfaction of EIC. (floor tiles for room ) ( Design drawing will be got priorly approved by EIC................ |
| 42 | P/L vitrified tiles 4`-0` x 2`-0` of Kajaria/Nitco/Johnsons/Somany make premium quality with adhesive 3 mm thick using 5KG adhesive per sqm i/c fitting joints complete in all respect as per satisfaction of EIC. ( wall tiles for bath ) ( Design drawing will be got priorly approved by EIC............ |
| 43 | S/I/T/C of Exhaust fan (18 inch) heavy duty motor with copper winding and IP55 protection with 1 year warranty. complete in all respect as per satisfaction of EIC (Make Cromption, Orient, Havells). |
| 44 | P/F of Heavy duty 4 slice Popup toaster, power min 1350 Watts. complete in all respect as per satisfaction of EIC (Make Russel Hobbs/ Havells/Morphy Richards)..... |
| 45 | P/F of commercial sandwich griller jumbo (4 bread slice) minimum 1800 watts stainless steel and warranty of 2 years complete in all respect as per satisfaction of EIC (Make Havells, Prestige, wonderchef). |
| 46 | P/F of Microwave oven (Convection) 30 L capacity used for baking grilling, reheating, defrosting and cooking with its complete accessories. Product warranty of 1 year and 3 years of magnetron. complete in all respect as per satisfaction of EIC (Make - Haier, IFB, Model- HIL3001CBSH). |
| 47 | P/F exposed part kit of single lever basin mixer wall mounted consisting of operating lever, cartidge sleeve, wall flange, nipple and spout (compatible with ALD-233N and ALD-235N) (OPP-CHR-15233NKPM) (Make: Cera, Hyndware and Jaquar) complete in all respect as per satisfaction of EIC. |
| 48 | P/F coat double hook cat. No. AKB 35761 comp. in all respect as per satisfaction of EIC (Make Cera, Hyndware and Jaquar make KUBIX F series) |
| 49 | P/F C.P. brass extension piece 15 mm (heavy) i/c cutting and wastage etc complete with the prior approval of EIC. (Make Cera, Hyndware and Jaquar) |
| 50 | P/F jet spray set for regular constellation cascade multi jet art no.-7016 size 15x900 mm of viking complete in all respect with the prior approval of EIC. (Make Cera, Hyndware and Jaquar) |
| 51 | P/F SS bearing hinges Dorset Godrej make of SB Art. No. HG 1151 (102x76x3.5x12) comp. in all respects as per satisfaction of EIC................. |
| 52 | P/F Elena prime vertical (manual) 25ltr.(EPM-WHT-V025) Geyzer Complete in all respect with the prior approval of EIC. (Make Cera, Hyndware and Jaquar) |
| 53 | P/F Angular stop cock with wall flange (OPP-CHR-15053PM) Complete in all respect with prior approval of EIC. (N.S) (Make Jaquar, Cera and Hyndware). |
| 54 | P/F 450 MM long Braided hose with Two nuts and Rubber Washers Without Nipple (Suitable for geysers) (ALD-CHR-805B) Complete in all respect (N.S) (Make Jaquar, Cera, Hyndware). |
| 55 | P/F Shower arm 20mm dia and 300mm long round shape with 900 bend for wall mounted showers with stainless steel flange (SHA-479L300s) Complete in all respect (N.S) Make Cera, Hyndware, Jaquar make. |
| 56 | P/F Over head shower 120 mm Round shape Single Flow (ABS Body Chrome Plated with Grey Face Plate) with Rubit Cleaning System(OHS-CHR-1789) Complete in all respect (N.S) with prior approval of EIC. Make: Cera, Hyndware and Jaquar ) |
| 57 | P/F Single lever exposed parts kit of hi- flow (OPP-CHR-15079NKPM) Diverter Consisting of Operating Lever, Cartridge Sleeve, Wall Flange( with Seals),Button Assembly Sleeve and Button (Compatible with ALD-079) Complete in all respect (N.S) with the prior approval of EIC. (Make: Cera, Hyndware and Jaquar) |
| 58 | P/F Towel Rack 600mm long with lower hangers,Stainless steel (AKP-CHR-35781PS)Complete in all respect (N.S). with the prior approval of EIC. (Make: Jaquar, Cera and Hyndware) |
| 59 | P/F Corner glass self with bracket (ACN-CHR-1173) Complete in all respect (N.S) with the prior approval of EIC. (make Jaquar, Cera, Hyndware ) |
| 60 | P/F Single piece slim concealed cistern body with installation Kit and `S- Type` drain pipe connection set for Wall Hung WC (without Flush Control Plate) (JCS-WHT-2400S) Complete in all respect (N.S) with the prior approval of EIC. (Make: Jaquar, Cera, Hyndware) |
| 61 | P/F Control Plate Opal (JCP-CHR-152415) Complete in all respect (N.S) with prior approval of EIC. (Make Jaquar, Cera, Hyndware ) |
| 62 | P/F Rimless, Blind Installation Wall Hung WC in white Matt With UF Soft Close Slim seat cover, Hinges and Accessories Set,(SLS-WHM-6953 BIUFSM) Size-375x520x400 mm Complete in all respect (N.S) with the prior approval of EIC. (Make Jaquar, Cera, Hyndware ) |
| 63 | P/F 2 way Bib Cock with wall flange (OPP-CHR-15041PM) Complete in all respect. with prior approval of EIC. (Make Jaquar, Cera, Hyndware) |
| 64 | P/F Hand Shower (Health Faucet) with 8mm dia, 1.2 meter long flexible tube and wall hook (ALD-573) Complete in all respect. with prior approval of EIC. (Make Jaquar, Cera, Hyndware) |
| 65 | P/F Toilet roll holder with stainless steel Flap (ACN-CHR- 1153S) Complete in all respect (N.S) (Cera, Hyndware, Jaquar make) with the prior approval of EIC. |
| 66 | P/F Regular body of Concealed stop cock Suitable for 15mm Pipe Line with Protection Cap (without Exposed Parts) (ALD-CHR-083) Complete in all respect (N.S) (Cera, Hyndware, Jaquar make) with the prior approval of EIC. |
| 67 | P/F Table top basin Size 485x370x150mm (SLS-WHT-6901) Complete in all respect (N.S) (Cera, Hyndware, Jaquar make) with the prior approval of EIC. |
| 68 | P/F Waste coupling 32 mm full thread with 80 mm height (ALD-CHR-705) Complete in all respect (N.S) (Cera, Hyndware, Jaquar make) with the prior approval of EIC. |
| 69 | P/F Bottle Trap 32 mm size with 300mm and 190mm Long Wall -connection Pipes and wall flange (ALD-CHR-769L300X190) Complete in all respect (N.S) (Jaquar, Cera, Hyndware make) with prior approval of EIC. |
| 70 | P/F Towel ring square with Round Flange (ACN-CHR-1121N) Complete in all respect (N.S) (Jaquar, Cera, Hyndware make) with the prior approval of EIC. |
| 71 | Providing and fixing P/F Concealed body for single lever basin mixer wall mounted but without exposed parts (ALD-CHR-233N) Jaquar, Cera, Hyndware make complete in all respect as per satisfaction of EIC. |
| 72 | P/F of stainless steel plain (food grade SS-304) water cooler, having cooling capacity of 40 ltrs per hour and storage capacity of 80 L voltage overload protection, silent operation and comprehensive warranty of 1 year complete in all respect as per satisfaction of EIC Make: Blue star, Voltas, Western Model 4080B. |
| 73 | P/F OPAL prime bath tub spout with flange (SPJ-CHR-15429PM) Jaquar, Cera, Hyndware make complete in all respect as per satisfaction of EIC. |
| 74 | P/F CP jali complete in all respect with prior approval of EIC (Make: Chilli, Hyndware, Cera). |
| 75 | P/F door back rubber complete in all respect as per prior approval of EIC (Make Doorset, Godrej). |
| 76 | P/F of Flying insect killer mild steel body high-voltage fly insect killer machine, machine body, mild steel, fitting wall/ceiling, power used:55W U.V Tubes: 2 Nos. 2 Feetx 18w, open area: 300 SQ. Ft Closed Area: 600 SQ FT Dimension:630 x 120 x 360 mm complete in all respect as per satisfaction of EIC. Make: (PESTOP, Ibell, Flayjack). |
| 77 | P/F of Advanced 5 stage filter R.O for water cooler with 1 year complete warranty complete in all respect as per satisfaction of EIC Make: Aquafresh, High spring, A.O. Smith. |
| 78 | P/F CP brass odonil container with wall flange high lifemake KUBIXF series complete in all respect (Make: Cera, Hyndware, Jaquar). |
| 79 | P/F tower bolt of SS round dia-10 (TBR 4`) comp. in all respects as per satisfaction of EIC. (dorset/ Godrej make). |
| 80 | P/F shower basket small (ACN-CHR-1177N) complete in all respect as per satisfaction of EIC. (Make Cera, Hyndware and Jaquar) |
| 81 | Double Bed with Bed Head plus bed platform with footrest. (mattress size 72”x75”) 9’-8”x3”x4’-6” (bed head size) 6`-2`x6`-3`x1`-2` (Bed platform size) 1 mm th. Laminate as per approved colour scheme over ¾ ” thick HDHMR Board with melamine polish in semi mat finish and teak wood lipping on edges. Finish as/approved. Upholstery as approved on the Bed Head over 1” th. foam over Ply/Board finish as/approved. Foot rest made of ¾” th. HDHMR board with 1mm th. laminate as per approved colour scheme plus teak wood lipping on edges with melamine polish in semi mat finish as/app. Platform to have 12mm thick HDHMR ply of with 1 mm th. laminate on it over Hollock wood frame out of section 3`x1 ¾” finish as/approved shade. Side members 11”x ¾” made of Board with laminate finish with teak wood beading on edges and Teak wood leg support out of 3” X3” finish as/app melamine polish in semi mat as /app shade and finish. HDHMR Board should be of Action tessa/ Green / Century . |
| 82 | Double Bed with Bed Head plus bed platform with footrest. (mattress size 72”x75”) 6’-2”x3”x4’-6” (bed head size) 6`-2`x6`-3`x1`-2` (Bed platform size) 1 mm th. Laminate as per approved colour scheme over ¾ ” thick HDHMR Board with melamine polish in semi mat finish and teak wood lipping on edges. Finish as/approved. Upholstery as approved on the Bed Head over 1” th. foam over Ply/Board finish as/approved. Foot rest made of ¾” th. HDHMR board with 1mm th. laminate as per approved colour scheme plus teak wood lipping on edges with melamine polish in semi mat finish as/app. Platform to have 12mm thick HDHMR ply of with 1 mm th. laminate on it over Hollock wood frame out of section 3`x1 ¾” finish as/approved shade. Side members 11”x ¾” made of Board with laminate finish with teak wood beading on edges and Teak wood leg support out of 3” X3” finish as/app melamine polish in semi mat as /app shade and finish. HDHMR Board should be of Action tessa/ Green / Century . |
| 83 | ..Bed side table with Laminated top 1’-9”x1’-4”x1’-9” Made of ¾” th. of HDHMR Board with teakwood beading on edges fixed over as/app design with laminate on all exposed faces and 1 mm laminate on internal faces. Table to have two drawer with soft touch channels of Hafele, Hettich and Dorset make. Front facia of drawers to be finish in laminate with S.S Handle on the board. Teak wood leg supports out of 2”x 1 ½”finish as/approved. Design to match the bed as per approved. Polish melamine in semi mat as /app shade and finish. Complete in all respect as per satisfaction of EIC. |
| 84 | ..Center Table with Glass top with round edges Size:- 3`-6`x1`-9`’x1`-6” . 5 mm th. glass fixed with T.W. frame of required section out of 2 ½”x1 ½” all around and duly polished as/app colour scheme. Leg as per design using teak wood sections out of 3”x3” as required to give proper shape and strength. Melamine Polish in semi matt finish as per approved colour scheme.Teak wood leg section out of 3”x1 ½” fixed with legs on four side finish as/app. Complete in all respect as per satisfaction of EIC. |
| 85 | ..Center Table with Glass top with round edges Size:- 2`-3`x2`-3`’x1`-6” . 5 mm th. glass fixed with T.W. frame of required section out of 2 ½”x1 ½” all around and duly polished as/app colour scheme. Leg as per design using teak wood sections out of 3”x3” as required to give proper shape and strength. Melamine Polish in semi matt finish as per approved colour scheme.Teak wood leg section out of 3”x1 ½” fixed with legs on four side finish as/app. Complete in all respect as per satisfaction of EIC. |
| 86 | Single Seater/Easy Chair With arms and with round back, seat 4’-0”wide overall dimension tentative size.-2’-6”x2’-3”x2’-9” seat height should be 1’-5”.Upholstery as per approved colour scheme. 4” thick foam of 40 density on seat and 2 ½” thick of 32 density on back over required spring base for seat and back over frame work made of soft wood leg as per design using teak wood sections for outer /exposed members required to give proper shape and strength. Polish as per approved. Complete in all respect as per satisfaction of EIC.Foam should be of sleepweel, Jindal or Feather, Corfoam. Complete in all respect as per satisfaction of EIC. |
| 87 | ..Two Seater Sofa With arms and with round back, seat 4’-0”wide overall dimension tentative size.-4’-6”x2’-5”x2’-9” seat height should be 1’-5”.Upholstery as per approved colour scheme. 4” thick foam of 40 density on seat and 2 ½” thick of 32 density on back over required spring base for seat and back over frame work made of soft wood leg as per design using teak wood sections for outer /exposed members required to give proper shape and strength. Polish as per approved. Complete in all respect as per satisfaction of EIC. Foam should be of sleepweel, Jindal or Feather & Corfoam. Complete in all respect as per satisfaction of EIC. |
| 88 | ..Wooden Cabinet below LED 4’-0”x 1’-3”x1’-6” plus Wooden panel at the height of 6`-9` as/drg. Teak wood leg support out of 3”x1 ½” finish as/app. Wooden cabinet made in ¾” th. HDHMR Board finish with 1 mm th. laminate with teak wood lipping on edges. Drawers made in ¾” Th. HDHMR Board on sides and front finish with 1 mm th. Laminate with melamine polish in semi mat finish. Shade as approved. Complete in all respect as per satisfaction of EIC. |
| 89 | ..Study Table with Laminated top . Size:- 3’-6”x1’-10”x2’-6” Made in ¾” th. HDHMR board with laminate 1 mm th. as approved with teak wood lipping on edges plus drawer with sides and bottom made of 12 mm thick HDHMR Board and front facia of the drawer is to be finish with Laminate. Drawer Channels should be of soft touch of Hafele, Hettich and Dorset make. Polish should be melamine in semi mat finish. Complete in all respect as per satisfaction of EIC. |
| 90 | ..P/Fixing Cupboard with fridge unit plus Luggage Rack plus Shelf for tea kettle. As/Drg. Size:8’-3” x2’-0”x6’-9”. ½” HDHMR board for back touching to the wall surface finish with 1 mm th. laminate. Laminated top on fridge unit and luggage rack as/app shade over ¾” HDHMR Board below it finished with teak wood member/ lipping as/app. Front shutters, internal partitions, internal shelves and other visible portions to be made with ¾” th. HDHMR Board finished with 1 mm laminate. All necessary hardware of Hafele, Hettich and Dorset make. S.S. handle should be 18” long of superior quality as approved. Provision of automatic light with sensor on the cupboard shutters. Shelf in ¾” Th. Board with laminate finish with teak wood lipping on edges. As/drg. One shelf in ¾” Th. Board with provision of wooden Holders for glasses as/drawing. If required above 6’-9” ht. Upper portion to be covered with board with laminate finish on outer facia if required as per site. Complete in all respect as per satisfaction of EIC. HDHMR board should be of century/green/ Action Tesa. |
| 91 | ..P/Fixing Cupboard with fridge unit plus Luggage Rack plus Shelf for tea kettle. As/Drg. Size:8’-7 ½” x2’-0”x6’-9”. ½” HDHMR board for back touching to the wall surface finish with 1 mm th. laminate. Laminated top on fridge unit and luggage rack as/app shade over ¾” HDHMR Board below it finished with teak wood member/ lipping as/app. Front shutters, internal partitions, internal shelves and other visible portions to be made with ¾” th. HDHMR Board finished with 1 mm laminate. All necessary hardware of Hafele, Hettich and Dorset make. S.S. handle should be 18” long of superior quality as approved. Provision of automatic light with sensor on the cupboard shutters. Shelf in ¾” Th. Board with laminate finish with teak wood lipping on edges. As/drg. One shelf in ¾” Th. Board with provision of wooden Holders for glasses as/drawing. If required above 6’-9” ht. Upper portion to be covered with board with laminate finish on outer facia if required as per site. Complete in all respect as per satisfaction of EIC. HDHMR board should be of century/green/ Action Tesa. |
| 92 | P/Fixing Cupboard with fridge unit plus Luggage Rack plus Shelf for tea kettle. As/Drg. Size:6’-4 ½” x2’-0”x6’-9”. ½” HDHMR board for back touching to the wall surface finish with 1 mm th. laminate. Laminated top on fridge unit and luggage rack as/app shade over ¾” HDHMR Board below it finished with teak wood member/ lipping as/app. Front shutters, internal partitions, internal shelves and other visible portions to be made with ¾” th. HDHMR Board finished with 1 mm laminate. All necessary hardware of Hafele, Hettich and Dorset make. S.S. handle should be 18” long of superior quality as approved. Provision of automatic light with sensor on the cupboard shutters. Shelf in ¾” Th. Board with laminate finish with teak wood lipping on edges. As/drg. One shelf in ¾” Th. Board with provision of wooden Holders for glasses as/drawing. If required above 6’-9” ht. Upper portion to be covered with board with laminate finish on outer facia if required as per site. Complete in all respect as per satisfaction of EIC. HDHMR board should be of century/green/ Action Tesa. |
| 93 | Supply of LED Surface/Recessed panel downlighter polycarbonate housing with integral driver (Minimum 2 year warranty) complete in all respect as per satisfaction of Engineer in Charge. make havells, phillips, crompton, halonix 12W |
| 94 | P/Fixing Cupboard with fridge unit plus Luggage Rack plus Shelf for tea kettle. As/Drg. Size:7’-6” x2’-0”x6’-9”. ½” HDHMR board for back touching to the wall surface finish with 1 mm th. laminate. Laminated top on fridge unit and luggage rack as/app shade over ¾” HDHMR Board below it finished with teak wood member/ lipping as/app. Front shutters, internal partitions, internal shelves and other visible portions to be made with ¾” th. HDHMR Board finished with 1 mm laminate. All necessary hardware of Hafele, Hettich and Dorset make. S.S. handle should be 18” long of superior quality as approved. Provision of automatic light with sensor on the cupboard shutters. Shelf in ¾” Th. Board with laminate finish with teak wood lipping on edges. As/drg. One shelf in ¾” Th. Board with provision of wooden Holders for glasses as/drawing. If required above 6’-9” ht. Upper portion to be covered with board with laminate finish on outer facia if required as per site. Complete in all respect as per satisfaction of EIC. HDHMR board should be of century/green/ Action Tesa. |
| 95 | P/Fixing Cupboard with fridge plus Shelf for tea kettle. As/Drg. Size:5’-3” x2’-0”x6’-9”. ½” HDHMR board for back touching to the wall surface finish with 1 mm th. laminate. on fridge unit as/app shade over ¾” HDHMR Board below it finished with teak wood member/ lipping as/app. Front shutters, internal partitions, internal shelves and other visible portions to be made with ¾” th. HDHMR Board finished with 1 mm laminate. All necessary hardware of Hafele, Hettich and Dorset make. S.S. handle should be 18” long of superior quality as approved. Provision of automatic light with sensor on the cupboard shutters. Shelf in ¾” Th. Board with laminate finish with teak wood lipping on edges. As/drg. One shelf in ¾” Th. Board with provision of wooden Holders for glasses as/drawing. If required above 6’-9” ht. Upper portion to be covered with board with laminate finish on outer facia if required as per site. Complete in all respect as per satisfaction of EIC. HDHMR board should be of century/green/ Action Tesa. |
| 96 | P/Fixing Cupboard with fridge unit plus Shelf for tea kettle. As/Drg. Size:4’-0” x2’-0”x6’-9”. ½” HDHMR board for back touching to the wall surface finish with 1 mm th. laminate. on fridge unit as/app shade over ¾” HDHMR Board below it finished with teak wood member/ lipping as/app. Front shutters, internal partitions, internal shelves and other visible portions to be made with ¾” th. HDHMR Board finished with 1 mm laminate. All necessary hardware of Hafele, Hettich and Dorset make. S.S. handle should be 18” long of superior quality as approved. Provision of automatic light with sensor on the cupboard shutters. Shelf in ¾” Th. Board with laminate finish with teak wood lipping on edges. As/drg. One shelf in ¾” Th. Board with provision of wooden Holders for glasses as/drawing. If required above 6’-9” ht. Upper portion to be covered with board with laminate finish on outer facia if required as per site. Complete in all respect as per satisfaction of EIC. HDHMR board should be of century/green/ Action Tesa. |
| 97 | P/Fixing Cupboard with fridge unit plus Shelf for tea kettle. As/Drg. Size:4’-10” x2’-0”x6’-9”. ½” HDHMR board for back touching to the wall surface finish with 1 mm th. laminate. on fridge unit as/app shade over ¾” HDHMR Board below it finished with teak wood member/ lipping as/app. Front shutters, internal partitions, internal shelves and other visible portions to be made with ¾” th. HDHMR Board finished with 1 mm laminate. All necessary hardware of Hafele, Hettich and Dorset make. S.S. handle should be 18” long of superior quality as approved. Provision of automatic light with sensor on the cupboard shutters. Shelf in ¾” Th. Board with laminate finish with teak wood lipping on edges. As/drg. One shelf in ¾” Th. Board with provision of wooden Holders for glasses as/drawing. If required above 6’-9” ht. Upper portion to be covered with board with laminate finish on outer facia if required as per site. Complete in all respect as per satisfaction of EIC. HDHMR board should be of century/green/ Action Tesa. |
| 98 | Luggage Rack of size:- 3’-6”x2’-0”x2’-3” . Made in ¾” th. HDHMR board with 1 mm th. Laminate on all top, outer and internal surface with teakwood lipping on edges and melamine semi mat polish as/shade approved complete in all respect. Teak wood member out of 3`x2` fixed with HDHMR board all around finish with melamine polish shade as/approved. |
| 99 | New Long Mirror . As/drg. (Size 2’-3”x5`-0` ht.) Teak wood frame out of 2 ½” x 1 ½” section duly polished in melamine / semi matt finish cornice, 4 mm thick mirror, over 12 mm thick HDHMR Ply duly fixed on wall as shown in the layout plan. Complete in all respect as per satisfaction of EIC. |
| 100 | Double quilted Bed Cover App. Size 100” x 100” with foam quilting. Cloth as/app. Colour scheme. Lining cloth of superior quality. Stitching lines as approved. Rate of cloth Rs.450-500/- per meter. Complete in all respect as per satisfaction of EIC. |
| 101 | S/E of suitable size of copper pipewith plus 9mm insulation, wire with plus 9 mm insulation etc for split AC including chasing and reccessing as it as basis complete in all respect with required labour and material as per satisfaction of Engineer in charge. copper pipe with plus 9mm Insulation. |
| 102 | 6” Th. pocketed Spring Mattress of size 72”x75” Sleepwell/Spring fit, Snoozers and Peps foam make. Complete in all respect as per satisfaction of EIC. |
| 103 | 8” Th. pocketed Spring Mattress of size 72”x75” Sleepwell/Spring fit, Snoozers and Peps foam make. Complete in all respect as per satisfaction |
| 104 | P/F Curtains as per approved colour scheme. PLEATED Curtain cloth as per approved colour scheme (fixed with channel) Lining cloth of superior quality . Width of the curtain should be 1’-6”after pleating and finished height 8’-6” ht. The range of the curtains should be 400-450/- per mtr. Complete in all respect. Complete in all respect as per satisfaction of EIC. |
| 105 | Cushions with polyfill fillers as/app. Colour scheme of superior quality make Recron Certified Microfibre and Ultra Fine Polycot.16”x16” size Cushion cloth As/app. Colour scheme. |
| 106 | P/F Wall Painting with framing (Modern art/Nature theme/ Oil painting with frame as/selected design and concept. Size: 1’-6”x2’-0” (as appproved by EIC and I.D) |
| 107 | P/F Table lamp. Readymade to be selected as per the décor of the room. (readymade to be selected as per approval colours scheme and as appproved by EIC and I.D) |
| 108 | Vanity of size 3`-6`x2`-0x1`-6` with two drawer and open shelf. Laminate to be provide on all exposed/ internal area.Made of 3/4` Th. HDHMR board and finish with laminates shade as approved. |
| 109 | Two Seater Sofa With arms and with round back, seat 4’-0”wide overall dimension tentative size.-4’-6”x2’-5”x2’-9” seat height should be 1’-5”.Upholstery as per approved colour scheme. 4” thick foam of 40 density on seat and 2 ½” thick of 32 density on back over required spring base for seat and back over frame work made of soft wood leg as per design using teak wood sections for outer /exposed members required to give proper shape and strength. Polish as per approved. Complete in all respect as per satisfaction of EIC. Foam should be of sleepwell, Jindal or Feather. Complete in all respect as per satisfaction of EIC. |
| 110 | Single Seater Sofa tentative size.-2’-6”x2’-5”x2’-9” seat height should be 1’-5”.Upholstery as per approved colour scheme. 4” thick foam of 40 density on seat and 2 ½” thick of 32 density on back over required spring base for seat and back over frame work made of soft wood leg as per design using teak wood sections for outer /exposed members required to give proper shape and strength. Polish as per approved. Complete in all respect as per satisfaction of EIC. Foam should be of sleepwell, Jindal or Feather. Complete in all respect as per satisfaction of EIC. |
| 111 | New Center Table with quartz on top with round edges Size:- 4`-0`x2`-0`’x1`-6”. Quartz top with round edges with beveled edges fixed inside T.W. frame of required section out of 2 ½”x1 ½” all around and duly polished as/app colour scheme. Leg as per design using teak wood sections out of 3”x3” as required to give proper shape and strength. Melamine Polish in semi matt finish as per approved colour scheme.Teak wood leg section out of 3”x1 ½” fixed with legs on four side finish as/app. Complete in all respect as per satisfaction of EIC. |
| 112 | Corner Table with quartz on top with round edges Size:- 2`-0`x2`-0`’x1`-6” .Quartz top with round edges with beveled edges fixed inside T.W. frame of required section out of 2 ½”x1 ½” all around and duly polished as/app colour scheme. Leg as per design using teak wood sections out of 3”x3” as required to give proper shape and strength. Melamine Polish in semi matt finish as per approved colour scheme.Teak wood leg section out of 3”x1 ½” fixed with legs on four side finish as/app. Complete in all respect as per satisfaction of EIC. |
| 113 | Dining chairs Teak wood member of reqd. section finish as/app. 3” thick foam of 40 density over 12 mm thick ply on seat and 1 ½” thick foam of 32 density with necessary required material as Niwar and Jute cloth on back and seat.Teak wood frame members below the seat should be out of 3”x1 ¼” with triangular corners inside.Legs, Arms and back supports as required to given proper shape as per drg. Framework to be finished with melamine/matt polish. Foam should be of sleepweel, Jindal or Feather. Complete in all respect as per satisfaction of EIC. |
| 114 | P/F Wooden Console with Quartz top alongwith mirror3’-0”x1’-3”x2’-6 P/F new console with mirror.Decorative Mirror size: 1’-6”x3”x3’-6”Quartz top with beveling on edges over ¾” th. HDHMR board with teakwood frame finished as/approved. Teakwood carved leg supports out of 4”x4” finish as/app.Teak wood carved member out of 6”x1 ½” on 3 sides finish as/app.Shelf made in ¾” Th. HDHMR board with laminate finish with teakwood lipping on edges.Teakwood frame out of 2 ½”x1 ½” polish in melamine /semi matt finish with 4 mm th. mirror of saint gobain over ½” th. HDHMR Ply finish as/app. |
| 115 | P/F Cupboard plus Service station cum fridge cabinet with quartz top Size:- 8`-0`x2`-0`x6`-9` As/Drg. Size:8’-3” x2’-0”x6’-9”. ½” HDHMR board for back touching to the wall surface finish with 1 mm th. laminate. Laminated top on fridge unit and luggage rack as/app shade over ¾” HDHMR Board below it finished with teak wood member/ lipping as/app. Front shutters, internal partitions, internal shelves and other visible portions to be made with ¾” th. HDHMR Board finished with 1 mm laminate. All necessary hardware of Hafele, Hettich and Dorset make. S.S. handle should be 18” long of superior quality as approved. Provision of automatic light with sensor on the cupboard shutters. Shelf in ¾” Th. Board with laminate finish with teak wood lipping on edges. As/drg. One shelf in ¾” Th. Board with provision of wooden Holders for glasses as/drawing. If required above 6’-9” ht. Upper portion to be covered with board with laminate finish on outer facia if required as per site. Complete in all respect as per satisfaction of EIC. HDHMR board should be of century/green/ Action Tesa. |
| 116 | Service station with quartz top Size:- 4`-0`x2`-0`x3`-6` Made of ¾” thick HDHMR board with 12mm thick HDHMR ply for drawers and 1mm thick laminate on all outer exposed areas.0.1mm thick laminate inside the drawers and cabinets All necessary hardware as Stainless steel handles , catchers, hinges, drawer channels etc to be of high quality. Teak wood skirting should be 1 ½” x3”. |
| 117 | Persian Carpet 4`-0`x6`-0` (Readymade to be selected as per approval colour scheme as appproved by EIC and I.D. |
| 118 | Dressing Stool for Vip Room. Made of Teak wood leg support out of section 2 ½” x1 ½” finish with melamine polish. Upholstery as/approved colour scheme over 2` th. foam fixed with teak wood frame as/approved colour scheme. |
| 119 | Vanity of size 2`-6`x2`-0x1`-6` with two drawer and open shelf. Laminate to be provide on all exposed/ internal area.Made of 3/4` Th. HDHMR board and finish with laminates shade as approved. |
| 120 | P/F Channel for curtains of high standard quality approved by authorities. (Channel for main Curtains and Sheer curtain). Double channel only in VIP room. Complete in all respect as per satisfaction of EIC. |
| 121 | Existing Double Bed with Bed head plus Bed Platform.* Existing upholstery is to be replaced with new.* Repair as/site condition. * Repolishing as/approved colour scheme in Semi mat melamine polish. |
| 122 | Existing Bed Side table.* Repair as/site condition. * Repolishing as/approved colour schme in Semi mat melamine polish. * Existing laminate is to be replaced with new as/app colour scheme. * Handles to be replaced with new. |
| 123 | Existing Center Table of size 2`-0`x2`-0`x1`-6`. * Existing laminate is to be replaced with new. * Repair as/site condition. * Repolishing as/approved colour scheme in Semi mat melamine polish. |
| 124 | Existing Easy Chairs. * Repair as/site condition. * Repolishing as/approved colour schme in Semi mat melamine polish. * Existing upholstery is to be replaced with new over 4`th. feather foam of 40 density seat and 2`th. on back. |
| 125 | Existing Study Table. * Existing laminate is to be replaced with new. * Repair as/site condition. * Repolishing as/approved colour schme in Semi mat melamine polish. |
| 126 | Existing Study Table. * Existing laminate is to be replaced with new. * Repair as/site condition. * Repolishing as/approved colour schme in Semi mat melamine polish. |
| 127 | Existing Study Chairs. Repair as/site condition. Repolishing as/approved colour schme in Semi mat melamine polish. * Existing upholstery is to be replaced with new over 2` th. feather foam of 40 density on seat and 2`th. on back. |
| 128 | Existing Long Mirror Repair as/site condition. Repolishing as/approved colour scheme if Looking Glass damaged needs to be replaced. |
| 129 | Repair/Repolishing of existing Dining tables. Repair as/site condition. Repolishing as/colour scheme. Existing laminate is to be replaced with new quartz top. |
| 130 | P/F Dorset/ Godrej make Nika Model-handle on rose of SS comp. in all respects, P/F mortice latch of SS Dorset Godrej make Art. No. ML 103 comp. in all respect. |
| 131 | [10.37.1]Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 1. 25 mm thick [Through Rate] |
| 132 | [10.50.1]Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 1. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. [Through Rate] |
| 133 | [10.51]Providing and fixing granite stone in all shades 15mm to 18 mm thick in skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc. [Through Rate] |
| 134 | [10.60]Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. [Through Rate] |
| 135 | [10.63.2]Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2. Size of Tile 600x600 mm [Through Rate] |
| 136 | [10.7]Providing and laying of conglomerate floor 50mm thick cement concrete topping 1:2:4 [Through Rate] |
| 137 | [10.70.2]Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 2. Size of Tile 600x600 mm [Through Rate] |
| 138 | [10.71.2]Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). 2. Size of Tile 600x600 mm [Through Rate] |
| 139 | [10.9]Providing and laying of Conglomerate floor 25 mm thick cement concrete 1:2:4 on 100 mm cement concrete 1:8:16 and 100 mm sand or stone filling. [Through Rate] |
| 140 | [10.93]Providing and Laying of P.O.P on floors with polythene sheet, cleaning, wiping floor and mixing of POP with water on the polythene sheet and removing it after completion and disposing off the same complete in all respects as per direction of Engineer-in-Charge. [Through Rate] |
| 141 | [11.17]Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge [Through Rate] |
| 142 | [11.5.4]12 mm cement plaster of mix : 4. 1:6 (1 cement: 6 fine sand) [Through Rate] |
| 143 | [11.52]Cement rendering on plaster 1 mm thick [Through Rate] |
| 144 | [11.58]Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete [Through Rate] |
| 145 | [11.60]Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. [Through Rate] |
| 146 | [11.67.1]Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 1. Water thinnable cement primer [Through Rate] |
| 147 | [11.70]`Extra for using White Cement based primer modified with high performance polymers, applied as an undercoat for exterior/interior cementitious surfaces before paint Technical Specifications: i) Degree of whiteness (in terms of reflectance) )93% ii) Fineness (Residue on 63 Micron Sieve) - Minimum 4.0 iii) Bulk Density - 0.8 to 0.9 kg/litreiv) Viscosity by Brookfield, 50rpm, Spindle no RV 05 at 25 - 300cP to 600cP v) Pot Life - Min. 180 minutes vi) Coverage after 1st coat - 80-100 sqft/kg vii) Adhesion cross-cut on 2 coat application after 48 hours - Min. 3B` [Through Rate] |
| 148 | [11.71.1]Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 1. Two or more coats on new work [Through Rate] |
| 149 | [11.91]Melamine polishing on wood work (one or more coat). [Through Rate] |
| 150 | [11.95.1]Finishing walls with Acrylic Smooth exterior paint of required shade : 1. New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) [Through Rate] |
| 151 | [12.1.1.1]Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid separately). 1.1. Second class teak wood [Through Rate] |
| 152 | [12.1.1.2]Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid separately). 1.2. Sal wood [Through Rate] |
| 153 | [12.103.2]Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 2. Twin rubber stopper [Through Rate] |
| 154 | [12.12.1]Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1. 1.5 mm thick [Through Rate] |
| 155 | [12.136.4]Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) crescent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware`s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 4. Three track three panels sliding door with fly proof S.S wire mesh (Two Nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm up to 5.00 sqm) [Through Rate] |
| 156 | [12.137.1]Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 1. 200 x 19 x 1.9 mm [Through Rate] |
| 157 | [12.157.1.2]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 1.2. For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) [Through Rate] |
| 158 | [12.157.2.2]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 2.2. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) [Through Rate] |
| 159 | [12.158.2]Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 2. Pre-laminated particle board with decorative lamination on both sides [Through Rate] |
| 160 | [12.160.1]Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 1. With stainless steel cover plate minimum 1.25 mm thickness [Through Rate] |
| 161 | [12.167.2]Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge 2. Powder coated minimum thickness 50 micron aluminium [Through Rate] |
| 162 | [12.169.1]Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 1. Up to 5mm depth and 5 mm width [Through Rate] |
| 163 | [12.172.2]Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F and ISO 11600 2. Up to 10 mm depth and 10 mm width [Through Rate] |
| 164 | [12.173]Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. [Through Rate] |
| 165 | [12.177.1]Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 1. With toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) [Through Rate] |
| 166 | [12.3.3.2.2]Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 3.2.2. Kiln seasoned and chemically treated Hollock wood 50x20 mm [Through Rate] |
| 167 | [12.36.1]Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 1. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws [Through Rate] |
| 168 | [12.39]Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). [Through Rate] |
| 169 | [12.65.1]Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 1. 300x16 mm [Through Rate] |
| 170 | [12.78.2]Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 2. 200x10 mm [Through Rate] |
| 171 | [12.78.3]Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 3. 150x10 mm [Through Rate] |
| 172 | [12.82]Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete. [Through Rate] |
| 173 | [12.85.1]Providing and fixing bright finished brass handles with screws etc. complete: 1. 125 mm [Through Rate] |
| 174 | [12.86]Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. [Through Rate] |
| 175 | [12.88]Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35 kg and door width up to 700 mm), with necessary accessories and screws etc. complete. [Through Rate] |
| 176 | [13.30.1]Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 1. Hot finished welded type tubes [Through Rate] |
| 177 | [20.36]Making connection with the existing G.I. branch main up to 40 mm size including cutting and threading pipe etc., complete excluding cost of tee and long screw, but including cartage of material to site. [Through Rate] |
| 178 | [22.103.2]Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 2. 20 mm nominal bore [Through Rate] |
| 179 | [22.103.3]Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 3. 25 mm nominal bore [Through Rate] |
| 180 | [22.105.1]Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 1. 15 mm nominal bore [Through Rate] |
| 181 | [22.127]Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. [Through Rate] |
| 182 | [22.14.2.2]Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 2.2. Flexible pipe 40 mm dia [Through Rate] |
| 183 | [22.16]Providing and fixing 40mm i/d G.I. waste pipe embedded in walls up to floor level including cost of union and plumber joint [Through Rate] |
| 184 | [22.181]Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. [Through Rate] |
| 185 | [22.2.1]Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- 1. White vitreous chinaware Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer [Through Rate] |
| 186 | [22.209]Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. [Through Rate] |
| 187 | [22.222.2.2]Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.2. Single Socket Type B 110mm o/d SWR UPVC pipe lines laid complete [Through Rate] |
| 188 | [22.222.2.3]Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.3. Single Socket Type B 90mm o/d SWR UPVC pipe lines laid complete [Through Rate] |
| 189 | [22.29.1]Extra for using coloured W.C. pan instead of white W.C. pan : 1. Orissa pattern W.C. pan 580x440 mm [Through Rate] |
| 190 | [22.34]Providing and fixing floor mounted, white vitreous chinaware single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous chinaware cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. [Through Rate] |
| 191 | [22.88.3]Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 3. 25 mm dia nominal bore [Through Rate] |
| 192 | [22.89.1]Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 1. 15 mm dia nominal bore [Through Rate] |
| 193 | [22.89.2]Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 2. 20 mm dia nominal bore [Through Rate] |
| 194 | [22.9.1]Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: 1. White glazed fire clay kitchen sink of size 600x450x 250 mm [Through Rate] |
| 195 | [22.91.3]Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc.External work 3. 25 mm dia nominal bore [Through Rate] |
| 196 | [22.92.1]Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 1. 25 to 40 mm nominal bore [Through Rate] |
| 197 | [22.94.1]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 1. 15 mm nominal bore [Through Rate] |
| 198 | [22.94.2]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 2. 20 mm nominal bore [Through Rate] |
| 199 | [22.94.3]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 3. 25 mm nominal bore [Through Rate] |
| 200 | [22.98.1]Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 1. 25 mm nominal bore [Through Rate] |
| 201 | [22.98.2]Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 2. 20 mm nominal bore [Through Rate] |
| 202 | [23.21]Fixing of LED Down lighter 7 to 28 Watt on ceiling or in false ceiling , including cutting/making hole in ceiling including making connections etc as required [Through Rate] |
| 203 | [23.22.1.10]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.10. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 125 to 160 amp, 25 KA [Through Rate] |
| 204 | [23.22.1.9]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA [Through Rate] |
| 205 | [23.22.2.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 2.1. MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP [Through Rate] |
| 206 | [23.22.4.11]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.11. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 8 way ( 8 incoming 3phase*8 outgoing) [Through Rate] |
| 207 | [23.22.4.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.2. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 8 way ( 2 incoming and 6 outgoing) [Through Rate] |
| 208 | [23.22.4.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.3. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 12 way ( 2 incoming and 10 outgoing) [Through Rate] |
| 209 | [23.22.4.4]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.4. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 16 way ( 2 incoming and 14 outgoing) [Through Rate] |
| 210 | [23.22.4.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.5. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing) [Through Rate] |
| 211 | [23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole [Through Rate] |
| 212 | [23.22.5.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.3. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Double POLE [Through Rate] |
| 213 | [23.22.5.4]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.4. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. Double pole [Through Rate] |
| 214 | [23.22.5.6]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.6. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs TRIPLE POLE [Through Rate] |
| 215 | [23.22.5.7]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.7. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp MCBs FOUR POLE [Through Rate] |
| 216 | [23.22.5.8]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE [Through Rate] |
| 217 | [23.22.8.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 8.2. SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings 100 amp 415 volts [Through Rate] |
| 218 | [23.22.8.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 8.3. SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings 200 amp 415 volts [Through Rate] |
| 219 | [23.23.1.3]MISCELLANEOUS 1.3. Supply and fixing Galvanised Iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Up to length of one metre):- Size 25 mm dia [Through Rate] |
| 220 | [23.23.6.1]MISCELLANEOUS 6.1. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 100 X 50 X 2 mm [Through Rate] |
| 221 | [23.23.8.1]MISCELLANEOUS 8.1. Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. 2 pair telephone wire [Through Rate] |
| 222 | [23.23.9]MISCELLANEOUS 9. Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required [Through Rate] |
| 223 | [23.24.3.3]MS STAND, BUS BAR CHAMBER AND PANELS 3.3. Supply and erection of metal clad bus bar chamber made from 1.6 mm thick M.S. sheet and fixing with rag bolts on wall or on existing pedestal/angle iron frame including bonding, detachable top and bottom including painting and necessary connection etc. (Aluminium bars). 100 amp 4 bars of 100 cm each (cross section 25 mm x 6 mm) chamber over all size 1.10 m x 45 cm x 18cm [Through Rate] |
| 224 | [23.27.5]Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 5. M.S. pedestal of size 1200 mm wide ,1500 mm high ,450 mm deep and bottom totally open , duly embeded in cement concrete block of size 1350 mm x 600 mm x 200 mm above ground level , having a base of size 1500 mm x 750 mm x 250 mm below ground level . 0 0 [Through Rate] |
| 225 | [23.4.1.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 1.1. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group A [Through Rate] |
| 226 | [23.4.2.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 2.1. Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group A [Through Rate] |
| 227 | [23.4.3.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 3.1. Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch Group A [Through Rate] |
| 228 | [23.4.4.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 4.1. Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group A [Through Rate] |
| 229 | [23.4.5.1]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.1. Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group A [Through Rate] |
| 230 | [23.5.6.2]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.2. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 2.50 Sqmm(1.1.80mm) [Through Rate] |
| 231 | [23.5.6.3]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.3. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm) [Through Rate] |
| 232 | [23.5.6.4]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.4. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 6 Sqmm(1/2.80mm) [Through Rate] |
| 233 | [23.5.6.5]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.5. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 10 Sqmm(1/3.50 mm) [Through Rate] |
| 234 | [23.8.1.6]FITTING AND ACCESSORIES 1.6. Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Call bell 220/230 volts musical type [Through Rate] |
| 235 | [23.8.10.1]FITTING AND ACCESSORIES 10.1. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 1 & 2 Modules including combined plate for Telephone and data [Through Rate] |
| 236 | [23.8.10.3]FITTING AND ACCESSORIES 10.3. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 4 Modules [Through Rate] |
| 237 | [23.8.10.6]FITTING AND ACCESSORIES 10.6. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 12 Modules [Through Rate] |
| 238 | [23.8.11.1]FITTING AND ACCESSORIES 11.1. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp 1 way switch [Through Rate] |
| 239 | [23.8.11.11]FITTING AND ACCESSORIES 11.11. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type [Through Rate] |
| 240 | [23.8.11.3]FITTING AND ACCESSORIES 11.3. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 1 way switch [Through Rate] |
| 241 | [23.8.11.4]FITTING AND ACCESSORIES 11.4. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp Socket [Through Rate] |
| 242 | [23.8.11.5]FITTING AND ACCESSORIES 11.5. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 6 pin Socket [Through Rate] |
| 243 | [23.8.9]FITTING AND ACCESSORIES 9. Supply and erection direct reading LCD Display Digital Ammetre/Voltmetre ( without CT or PT ) on wall/existing penal complete in all respect with necessary connections [Through Rate] |
| 244 | [24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate] |
| 245 | [24.1.13]EARTHING AND LIGHTENING ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required. [Through Rate] |
| 246 | [24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate] |
| 247 | [24.11.18]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITH SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 18. 10 Sq mm 4 core (Arm.) [Through Rate] |
| 248 | [24.11.24]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITH SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 24. 16 Sq mm 4 core (Arm.) [Through Rate] |
| 249 | [24.11.32]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITH SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 32. 25 Sq mm 4 core (Arm.) [Through Rate] |
| 250 | [24.11.40]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITH SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 40. 35 Sq mm 4 core (Arm.) [Through Rate] |
| 251 | [24.12.48]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITHOUT SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 48. 50 Sq mm 4 core (Arm.) [Through Rate] |
| 252 | [24.14.24]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 24. 16 Sq mm 4 core (Arm.) [Through Rate] |
| 253 | [24.14.32]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 32. 25 Sq mm 4 core (Arm.) [Through Rate] |
| 254 | [24.14.46]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 46. 50 Sq mm 3.5core (Arm.) [Through Rate] |
| 255 | [24.2.2.2]LT CABLE 2.2. Laying of underground cable 0.75 metre below ground level covered with sand and bricks including excavation and refilling of trenches.:- 16 Sq mm to 35 sqmm 2 to 4 Core [Through Rate] |
| 256 | [24.4.1.2]STREET LIGHT 1.2. 3 metres long 50 mm dia pole duly embedded 0.6 m below ground level. 4.5metres long 50 mm dia pole duly embedded 0.75 m below ground level. [Through Rate] |
| 257 | [24.4.11.1]STREET LIGHT 11.1. Erection of MS/GI/Swaged ( excluding Octagonal ) metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.Above 2.5 metre and up to 4 metre [Through Rate] |
| 258 | [24.4.2.3]STREET LIGHT 2.3. Supply and erection of GI bracket made of 32 mm dia medium class GI pipe, having 15 deg angle from horizontal, suitable for fixing on top of Street Light pole 120 cm long, with 30 cm high suitable size pole cap [Through Rate] |
| 259 | [24.4.4.1]STREET LIGHT 4.1. Erection of street light fitting on the pole including the cost of petty material required (irrespective of height/length of bracket) At Pole up to the height of 4.5 metres [Through Rate] |
| 260 | [24.4.4.3]STREET LIGHT 4.3. Erection of street light fitting on the pole including the cost of petty material required (irrespective of height/length of bracket) At Pole above 7 metres but up to the height of 9 metres. [Through Rate] |
| 261 | [24.4.5]STREET LIGHT 5. Supply and erection of Single Phase weather proof M.S. box of size 20 cm x 15 cm x 10 cm with hinged cover made of 2 mm thick MS sheet, locking arrangements, housed in wall/fixed on pole , including the cost of 1 no 4 way 16 A Bakelite connector, 1 no. 6 amp SP MCB and 1 Nos. 16 amp. neutral links fixed on Bakelite sheet in the M.S. box including painting and necessary connections. [Through Rate] |
| 262 | [24.4.6]STREET LIGHT 6. Supply and erection of Three Phase weather proof M.S. box of size 30 cm x 20 cm x 15 cm with hinged cover made of 2 mm thick MS sheet, locking arrangements, housed in wall/fixed on pole , including the cost of 1 no 4 way 16 A Bakelite connector, 1 no. 16 amp TP MCB and 4 Nos. 16 amp. neutral links fixed on Bakelite sheet in the M.S. box and necessary connections. [Through Rate] |
| 263 | [24.4.7.2]STREET LIGHT 7.2. Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 40 mm dia [Through Rate] |
| 264 | [24.4.8.7]STREET LIGHT 8.7. Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 9 Metre Long pole with top dia 100 mm and bottom 200 mm with base plate of size 350 x 350 x 20 mm. [Through Rate] |
| 265 | [28.16]Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken up to 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the purpose of measurement the entire treated surface will be measured. [Through Rate] |
| 266 | [28.17.1]Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls up to 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls up to 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick joint less cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 1. With average thickness of 120 mm and minimum thickness at khurra as 65 mm. [Through Rate] |
| 267 | [30.17]Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. [Through Rate] |
| 268 | [30.18]Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. [Through Rate] |
| 269 | [30.22]Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. [Through Rate] |
| 270 | [30.52.1]Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of malba/ debris/rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. 1. For door/ window/ clerestory window [Through Rate] |
| 271 | [30.54.2]Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 2. Float glass panes of nominal thickness 5 mm (weight not less than 12.5 kg/sqm) [Through Rate] |
| 272 | [30.88.1]Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 1. For pipes 100 to 250 mm diameter [Through Rate] |
| 273 | [4.40.5]Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 5. Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. [Through Rate] |
| 274 | [4.8.1]Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead up to 50 m and lift up to 1.5 m : 1. All kinds of soil [Through Rate] |
| 275 | [5.25]Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. [Through Rate] |
| 276 | [5.29.1]Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 1. Of area 3 sq. metres and below [Through Rate] |
| 277 | [5.29.2]Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 2. Of area beyond 3 sq. metres [Through Rate] |
| 278 | [5.43.1]Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 1. For thickness of tiles 10 mm to 25 mm [Through Rate] |
| 279 | [5.45]Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. [Through Rate] |
| 280 | [6.1.6]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) [Through Rate] |
| 281 | [6.16]Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). [Through Rate] |
| 282 | [6.30.3]Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform [Through Rate] |
| 283 | [6.33.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note: Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more [Through Rate] |
| 284 | [6.34.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more. [Through Rate] |
| 285 | [7.22.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 1. Cement mortar 1:4 (1 cement : 4 coarse sand) [Through Rate] |
| 286 | [8.29]Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. [Through Rate] |
| 287 | [9.33]Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( plus 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. [Through Rate] |
| 288 | [9.57.1]Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 1. 75 mm diameter [Through Rate] |
| 289 | [9.57.3]Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 3. 150 mm diameter [Through Rate] |
| 290 | [9.58.3.3]Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 3.3. Single tee with door 150x150x150 mm [Through Rate] |
| 291 | [9.58.4.3]Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 4.3. Single tee without door 150x150x150 mm [Through Rate] |
| 292 | [9.58.5.3]Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.3. Bend 87.5° 150 mm bend [Through Rate] |
| 293 | [9.59.1]Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 1. 75 mm [Through Rate] |
| 294 | [9.59.2]Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 2. 110 mm [Through Rate] |
| 295 | [9.59.3]Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 3. 150 mm [Through Rate] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 01, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 daySep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender