Tender For Construction Solar Powered Standalone Dw Facility With Ordex System At Sobahpur Ac 128531992 Under The Award Of 15Th Fc Tied Grant For The Year 2025-26 During 2026-27.
Tender Value
26.50 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
19 days left
EMD
53000
Bank guarantee accepted
Document Fee
530
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kokrajhar → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Solar Powered Standalone Dw Facility With Ordex System At Sobahpur Ac 128531992 Under The Award Of 15Th Fc Tied Grant For The Year 2025-26 During 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Providing installation and commissioning of 150x150 mm dia DTW by Odex boring within the jurisdiction of different PHE divisions including including preparation of site for placing of drilling rig, air compressor, transportation of rig and ancillary equipments. Construction of temporary accommodation and low cost sanitary facility for drilling staff and providing water supply facilities at drilling site. Drilling of bore well by using drilling rig having ODEX system Extraction of drilling pipes / bits against skin friction at the end of each day and after completion of the operation including washing of the bore hole all complete as directed and lowering / sinking of well assembly including welding of pipe joints. Developing of the D.T.W. with air compressor, Make- Kirloskar / Cumins all complete as directed by the department. |
| 2 | Providing & fixing GI chain link fabric fencing of required width in mesg size 50x50 mm including strengthening with 2 mm dia wire or nuts bolts and washers as required as per direction of Engineer-in-charge 16.70.2/made of GI wire of dia 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade. |
| 3 | Providing, installation and commissioning Solar Submersible pump (with different heads) with Power unit (Solar Modules), Controller, Module mounting Structure, Tracking (Manual Sun tracking system), 3 core cable, earthing, lighting protection, Civil work (excavation and installation of base for panels), miscellaneous accessories, Solar module cleaning system, all items conforming to relevant IS/IEC standards with warranty of 5 years and transportation to Guwahati, Assam for the following capacity as directed by department and subjected to SoPs, guidelines issued from department. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge./ All kinds of soil. |
| 5 | Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: |
| 6 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improvedurability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level |
| 8 | Providing and fixing hand roll of approved size welding etc.,including applying primimg coat of approved steel primer 10.26.3.GI Pipes. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for : 4.3.1 :Foundations, footings, bases of columns, etc. for mass concrete |
| 10 | 5.3.3 : Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 11 | 5.9.3 : Suspended floors, roofs, landings, balconies and access platform. |
| 12 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103. (A). In substructure upto plinth level. |
| 13 | (B). In superstructure from plinth level upto Ist floor level. |
| 14 | 5.33.2.2 : Concrete of M30 grade with minimum cement content of 350 Kg/Cum |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : In Prop : 1:2:4 |
| 16 | 11.6 : Cement plaster skirting up to 30 cm height, with cement mortar 1:3 finished with a floating coat of neat cement. |
| 17 | Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammer…. |
| 18 | Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: |
| 19 | Providing and laying in position ready mixed or site batched design… |
| 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5in superstructure above plinth level up to floor V level. |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). saal wood |
| 22 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) 9.5.1 Second class teak wood 9.5.1.1 35 mm thick shutters |
| 23 | 11.6 : Cement plaster skirting up to 30 cm height, with cement mortar 1:3 finished with a floating coat of neat cement. |
| 24 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer |
| 25 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.48A.1 : New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 26 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour |
| 27 | MS angle ladder 12 m height. |
| 28 | Providing & placing on terrace polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 29 | Supplying, fitting, fixing in position Multimedia pressure filter consisting of FRP vessel of TATA make filled with Anthracite, Kotax light media, White Sand, Treated Sand, Gravel, MnO2 filter media along with Cotton Candle to remove iron effectively at a max. pressure of 10 kg/sqcm and max flow rate of 5000 lph with back wash facility including all fittings, valves, Tee, Elbow etc. complete in all respect as directed including all Taxes. |
| 30 | 1551/GI Pipes 50 mm dia. |
| 31 | 7257/CP Brass bibcock 15 mm |
| 32 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6..sizes as required: 50 mm dia. |
| 33 | Construction of masonry chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 for sluice valve…with common burnt clay FPS (non modular) bricks of class designation 7.5. |
| 34 | Construction of platform (3.00 x 1.20) m, complete as directed by the Engr-in-charge. |
| 35 | Manufacturing, supplying and fixing retro reflevtive overhead signage boards made up of 2 mm thick aluminium sheet. |
| 36 | Supplying, fitting and fixing chain link fencing of 10 S.W.G, G.I. Wire 50mm x50mm mesh fitted to M.S angle iron post at 2000mm apart of specification detailed below including supplying, fitting and fixing hooks, eye bolts with nuts, staples and bolts including three horizontal lines of G.I wire 10 S.W.G at top,middle and bottom and with one vertical line to each fencing post for keeping the fencing tight and erect complete, including one coat of primer painting to M.S angle iron post in P.C.C base etc. with following.a) Corner and end posts with M.S angle of size 50mmx50mmx 5mm and length not less than 1800mm only duly slotted and bottom torqued with two numbers as stay posts.b) Intermediate post with M.S angle of size 40mmx40mmx5mm and length not less than 1800mm only duly slotted and bottom torqued and splayed.c) Stay post with M.S angle of size 35 mmx35mmx5mm and length not less than 1800mm duly slotted and bottom torqued and splayed. All M.S angle iron posts are to be fitted to P.C.C base embedded not less than 600mmd) Intermediate post with M.S angle of size 40mmx40mmx5mm |
| 37 | Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with anotherhorizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mmapart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100mmabove the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces,arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on eachleaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified.(Separate payment will be made for posts). |
| 38 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate. |
| 39 | Collection from the field and testing in the laboratory of undisturbed soil samples for sub- soil investigation (as per relevant I.S code) by open drive sampler (100mm dia boring) through clayey soil layer/ sandy soil layer/ sandy clay/ sandy silt layer/ clayey silt layer, conduction standard penetration test (SPT) and collection of SPT sampler, observation of ground water table, spot level survey to the bore location and carrying out R.L. from nearest B.M., laboratory test (particle size analysis, hydrometer test, determination of liquid limit, plastic limit, bulk density, moisture content, specific gravity,conducting triaxal test, direct shear test, unconfined compression test, consolidation test including preparation of sub-soil investigation report complete with necessary printing and binding (minimum 5 copies) |
| 40 | Making soak pit 2.5 m dia 3.0 m deep with 45 x45 cm dry brick honey comb shaft with bricks and SW drain pipe 100 mm dia, 1.8 m long complete as per standard design. 19.32.1 : With common burnt clay FPS (non modular) bricks of class designation 7.5 |
| 41 | Site Development. |
| 42 | Operation & maintenance for 12 months. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender