Tender For Girls Higher Secondary School Dooru (Estimated Cost 95.48 Lacs ( Base Amount 80.92 Lacs + Gst Amount 14.56 Lacs )
Tender Value
95.48 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
0 days left
EMD
1.90 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Girls Higher Secondary School Dooru (Estimated Cost 95.48 Lacs ( Base Amount 80.92 Lacs + Gst Amount 14.56 Lacs )
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm shutters in for doors, windows and clerestory windows with ISI marked M.S. pressed butt 35mm 30mm hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge 30mm thick imported KD Wood/silver wood |
| 2 | Providing and fixing glazed shutters for doors, windows and clerestory windows of using 3.5mm thick float glass panes including ISI marked M.S. pressed butt shutters hinges bright finished of required size with necessary screws. 35 mm thick imported KD wood/silverwood |
| 3 | providing and fixing panelled or panelled and glazed shutter for doors windows and clerestory window fixing with butt hinges of required size with necessary screws including panelling of 25-40mm thick ( imported KD wood /silverwood) |
| 4 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. Two or more coats on new work. |
| 5 | Poviding and fixing of aniodised Alumimum fittings as per IS 1868 as aproved by incharge engineer at site |
| 6 | T bolt 100mm |
| 7 | T bolt 150mm |
| 8 | Handles125mm |
| 9 | Handle 150mm |
| 10 | L-Drop link |
| 11 | 12mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 fine sand) |
| 12 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete .2 mm thick. |
| 13 | Flooring with marble stone of specified thickness as per sample of marble approved by engineer in charge over 20mm thick thick base of cement mortor 1:4 laid and jointed with grey cement slurry including rubbing polishing and curing complete with udaipur green marble 16 mm/18mm thick. |
| 14 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 15 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 16 | Providing and fixing of 0.5mm thick colour coated high rib iron profile sheets of approved profile as approved by Engineer-in-Charge in roofing including carriage of same upto site of work complete. The sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 mtr or as directed by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5 x 55mm) with EPDM seal of same colour matching the shade of the sheets. including ridges valleys eaves of matching colour |
| 17 | Providing and fixing false ceiling using 12 mm thick veneered plywood of approved make fixed beneath the existing RCC/steel/wooden ceiling, over a framework of imporetd wooden battens (50 × 25 mm) or properly anchored to existing ceiling with dash fasteners/anchor fasteners/screws/nails at required spacing, including providing hangers where required, leveling, alignment, cutting to required size, making openings for light fixtures, fans, AC diffusers, and finishing the joints smooth.The item shall include screws, all fittings and all incidental works complete as per drawings and directions of Engineer-in-Charge.. |
| 18 | Engagement of unskilled labour for dismantling and removing existing ceiling wherever required, including careful removal of debris, chipping of existing plaster surface to make it suitable for tile work, sand brushing/cleaning of roof surface for paint application, stacking of serviceable material, disposal of unserviceable material within site premises, and all incidental works complete as per directions of Engineer-in-Charge.( to be paid as per actual progress subject to the maximum of 20 nos) |
| 19 | Providing/Fixing of cp brass fittings of standard quality like jaquar, cera, hindware or eqv conferming to IS:8931 sample to be approved by incharge engineer |
| 20 | Wall mixer |
| 21 | angle value |
| 22 | Bib cock short body |
| 23 | Providing and fixing of Grating |
| 24 | PVC waste pipe flecible 32 mm dia |
| 25 | PVC connections |
| 26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including allCPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge |
| 27 | 15mm nominal outer dia pipes. |
| 28 | 20mm nominal outer dia pipes. |
| 29 | 25mm nominal outer dia pipes. |
| 30 | Providing and fixing of Hot water Heater Geyser of approved quality (racold , havels, jaquar )including PVC connections brand including all fittings complete 50 litres |
| 31 | Providing and fixing imported wooden wall panelling of approved make, shade and pattern, fixed over a framework of vaneered ply , properly treated, aligned and securely anchored to the wall, including all necessary supports, screws, adhesives and surface preparation, complete with polishing/finishing as specified (PU spray polish or equivalent TWO COATS), all complete as per drawings and direction of the Architect/Engineer-in-Charge |
| 32 | Providing and fixing HDF AC3 grade board panelling of approved make and shade, 10mm thick, fixed over 12 mm thick plywood backing, including cutting to size, edge finishing, fixing with nails/screws, and complete with all materials, labour, leads, lifts, tools and tackles, as per drawings, specifications and directions of the Engineer-in-Charge. |
| 33 | P/ L in position cement concrete in 1:2:4(1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
| 34 | Providing and laying water-resistant composite wooden flooring such as SPC / WPC or similar approved make, of approved shade, texture and thickness, laid over properly prepared, clean and level sub-base, including suitable underlay (if required), click-lock / adhesive fixing system, cutting, matching, edge trims, expansion gaps, skirting (if specified), and finishing complete, all as per manufacturer’s specifications and direction of the Architect / Engineer-in-Charge. |
| 35 | Providing and fixing Khatam Band (Khatambandi) ceiling in Paanch Murabah pattern using Badloo (Fir) wood, accurately cut and assembled, including making of panels, fitting in position, finishing complete, with all labour, tools, scaffolding, leads and lifts with two or more coats of PU / Malamine Polish, complete as per drawings, specifications and directions of Engineer-in-Charge. |
| 36 | Providing and fixing false ceiling using PVC panels of approved make and shade over framework, comprising of main runners, cross members, perimeter channels, hangers suspended from slab/roof with rods or approved suspenders at required spacing, including providing and fixing all necessary accessories such as cleats, fasteners, screws, anchor fasteners, nuts & bolts, cutting, leveling, alignment, edge finishing, making openings for light fixtures, diffusers, AC grills, and all incidental works complete as per approved drawings and directions of Architect/Engineer-in-Charge. |
| 37 | Providing and fixing Mild Steel (MS) sheet rainwater gutters of approved make, 100 mm width and 3mm thickness, including supply of pvc downpipes of 75mm diameter, all necessary brackets, clamps, hangers, elbows, end caps, junctions, bends, and other accessories. Gutters shall be fixed at proper slope on roof fascia using brackets at suitable spacing, and downpipes shall be fixed to walls with brackets at proper spacing. The system shall ensure proper flow of rainwater into stormwater drains. Complete in all respects as per drawings and direction of Architect/Engineer-in-Charge. |
| 38 | Providing, fabricating, and erecting structural steel work in built-up sections, trusses, and framed structures, including soffits, as per approved drawings. Work includes cutting, hoisting, assembling, and fixing in position, bolting/welding as required, and applying one coat of approved steel primer on all exposed steel. Complete in all respects as per drawings, specifications, and directions of Architect/Engineer-in-Charge. |
| 39 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm Kajaria, Somany made or EQv |
| 40 | Providing and fixing aluminium windows using approved-grade extruded aluminium sections with powder-coated or anodized finish, including fabrication and assembly of frames, shutters, mullions, and transoms, glazing with frost glass (of approved thickness), rubber/EPDM gaskets, aluminium beading, end trims, all necessary hardware such as locks, handles, hinges, screws, and fasteners, cutting, hoisting, and fixing in position with proper alignment, smooth operation, and weather-tight joints, including finishing, cleaning, and all incidental works complete as per drawings and directions of Architect/Engineer-in-Charge. |
| 41 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles,ncluding applying a priming coat of approved steel primer all job complete. |
| 42 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) includingmaking joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required and paint of approved colour complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). |
| 43 | Providing and fixing brick tile cladding of approved make, size, texture and shade on external facade over prepared surface, using cementitious tile adhesive conforming to relevant IS standards, including surface preparation, cleaning of substrate, application of primer if required, proper alignment and leveling, maintaining uniform joints, and finishing the joints with lime mortar pointing (1 lime : 2 fine sand) or as specified, neatly struck and cured, including, cutting of tiles to required size, edge finishing, curing, cleaning of surface and all incidental works complete as per drawings and direction of Engineer-in-Charge. |
| 44 | Construction of Boundary wall |
| 45 | Dismentaling brickwork manually / mechanical means including stacking of serviceable material and disposal of inservicable material within a 50m lead as per EIC. |
| 46 | Dismentaling RRM/Cement concrete manually / mechanical means including stacking of serviceable material and disposal of inservicable material within a 50m lead as per EIC. |
| 47 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil : |
| 48 | Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. |
| 49 | P/ L in position cement concrete in 1:4:8(1 cement :4coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
| 50 | Reinforced cement concrete work in 1: 1.5 : 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size)excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials from approved sources upto site of work complete.( All works upto plinth level) |
| 51 | P/ L in position cement concrete in 1:2:4(1 cement :2 coarse sand : 4 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
| 52 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) . |
| 53 | 15mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 fine sand) |
| 54 | Reiforcement for R.C.C work including straightening, cutting, bending, placing in position & binding with binding wire all complete, Thermo Mechanically Treated Bars (500 D) (All work at all levels complete). |
| 55 | Brick work with F.P.S (non modular) bricks of class designation 75 in 1:4 mix (1 cement: 4 coarse sand) in super structure including carriage of all materials from approved sources upto site of work complete. (above plinth level upto floor V ) |
| 56 | Development of Volley Ball Ground |
| 57 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil : |
| 58 | Providing and laying of stone soling/GSB/RBM , including spreading, levellingand consoldating with 8-10 tonne road roller in required gradient including carriage of same from approved source upto site of work complete. |
| 59 | Providing and Laying of WBM base course with specified stone aggregate of size 63-45mm , stone screening 13.2 mm and binding material including , sorting, spreading to template,m watering and consolidation with P.R.R of (8-10 Tonne) capacity all complete including carriage of material from approved source upto site of workas per the directions of incharge engineer at site (compacted quantity to be measured) |
| 60 | Providing and fixing artificial UV resistant polyethylene synthetic grass with rigid monofilament yarn, 40 mm pile height, minimum 1250 g/sqm pile weight and total carpet weight not less than 2500 g/sqm, stitch rate minimum 285 stitches per meter, including sand infill (0.2–1.0 mm size) minimum 15 mm height and rubber granule infill minimum 8 mm height with total infill weight not less than 2.25 kg/sqft, including white tufted line markings for volleyball court (painted lines not allowed), laid as per manufacturer’s specifications complete including jointing tape, adhesive, power brushing, transportation, loading/unloading and all taxes complete as directed by Engineer-in-Charge. |
| 61 | Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. |
| 62 | P/ L in position cement concrete in 1:4:8(1 cement :4coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
| 63 | P/ L in position cement concrete in 1:2:4(1 cement :2 coarse sand : 4 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. |
| 64 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete. |
| 65 | Providing, fabricating, supplying and erecting vertical posts for volleyball court made of structural steel (MS pipe/section) of required size as per sports specifications, including supply and fixing of volleyball net arrangement, hooks, pulleys, tensioning devices and other fixtures required for proper installation and adjustment of the net, complete with cutting, welding, grinding and fixing in proper position and alignment, including surface preparation, application of one coat of approved steel primer and two coats of synthetic enamel paint of approved colour, and all materials, labour, tools and incidental charges, complete as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender