Tender For Internal Electrification In C-Type Shop - 10 Nos, Extention Of Lt Line, Lighting Arrangement And Cabling Work At Nmy Varanasi.
Tender Value
3.34 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
18 days left
EMD
33400
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Internal Electrification In C-Type Shop - 10 Nos, Extention Of Lt Line, Lighting Arrangement And Cabling Work At Nmy Varanasi.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group A 1.10.1 |
| 2 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch + 3 pin 5/6 A socket outlet. 1.24.1+1.24.4 |
| 3 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way, Double door. 2.3.1 |
| 4 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole. 2.10.3 |
| 5 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole. 2.10.1 |
| 6 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. 5.2 |
| 7 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth ectrode including connection with G.I. thimble excavation and re-filling as required. 5.12 |
| 8 | Supply and fixing hexagonal Round G.P.fan box approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. 1149 |
| 9 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch and 6 pin 15/16 A socket outlet. 1.24.3+1.24.5 |
| 10 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. As required. 3 Module (100mmX75mm) 1.27.2 |
| 11 | Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. 1.12 |
| 12 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 1.25 |
| 13 | Supply and fixing of water tight oblong 10W LED bulkhead lumens having pressur die cost houghing with driver set confirm to IP 65 & above protection JK -08 high punity/transmisivity UV steplized non yellowish difuser/for uniform light distribution detuchable driver set, open and sort circuit protection, sutable for 24 hours continuous operation complete in all respect.1200 system lumens >120 Lm/W PF>0.95, CRI > 0.70 >300V over voltage protection, 4 KV internal surge protection, metal houghing with 5 years warrantee. 23.11 |
| 14 | S/F of PVC batten/angle holder including connetions etc. as required. 1.58 |
| 15 | Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-36 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. 616 |
| 16 | Supply & erection of \\"D\\" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint . 623 |
| 17 | Supplying and erection of stay set complete (galvanised) with 19/20mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cmX 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominalsize) foundation including excavation and refilling etc. as required. 13.1 |
| 18 | LED Street light fixture, powder coated pressure die castaluminium body (System lumen efficacy >135 lm/Watt). Supplying,Installation, Testing & Commissioning of Street light LED fixture,powder coated pressure die cast aluminium body with built in orseparate driver as per the requirement with Driver efficiency >85%,Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temprange -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as perIEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltageprotection, EMI-EMC as per CISPR-15, lenses for beam angle as perIESNA type I/II/III as per the width of the road and the projectrequirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with70% of initial Lumen maintained till life ends as per LM80extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching)<5, Maximum power consumption should not more than the specifiedrating and Fixture shall be of relevant BIS standard complete in allrespect i/c external connections with 1.5 sq mm FRLS/HFFR, PVCinsulated copper conductor single core cable and earthing etc. asrequired with Minimum 5 year OEM warranty. System lumen efficacy>135 lm/Watt output . LM79 & LM80 Test report and all testingrequired for LED fixtures as per BIS shall be submitted.. Shape sizeand CCT shall be as approved by Engineer-in-Charge as perrequirement. (Thermal management: heat sink of aluminiumhousing such that LED junction temperature shall not rise above90°C). 120W 8.14.16 |
| 19 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting offluorescent / HPMV / HPSV street light fitting on poleincluding bending the pipe to the required shape, 2nos 40 mm X 3 mm flat iron clamps with nuts, boltsand washer, painting the flat iron with primer and finishpaint etc. as required. 13.34 |
| 20 | Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect. 628 |
| 21 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. 634 |
| 22 | Supply and layin of aluminium conductor PVC insulated armoured served sheathed cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sider and on top. On surface the cable run shall be fixed on M.S clamps etc of suitable size or as dircted by the engineer-incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 6sqmm 2 core. 20c.1.1 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender