Tender For Interior Furnishing Works In Additional Director Room, Reception Lobby (Atrium) And Toilets In The Office Building At Indian Academy Of Highway Engineers, Sector-62, Noida
Tender Value
2.65 Crore
Estimated cost
Bid Submission
15 Sep 2026
0 days left
EMD
5 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Interior Furnishing Works In Additional Director Room, Reception Lobby (Atrium) And Toilets In The Office Building At Indian Academy Of Highway Engineers, Sector-62, Noida
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of arreas 3sqmt and below (Door & Window dismantling) |
| 2 | Demolishing Masonry (Wall Chasing)Demolishing brickwork manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. Work includes precision chasing of the existing masonry wall to widen the rough opening by 75mm to 100mm, ensuring lintel bearing is maintained, using diamond cutting saws to prevent structural vibration and micro-cracking in adjacent walls. |
| 3 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (Flooring) |
| 4 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin- charge. (Aluminium doors , windows & ventilators) |
| 5 | Dismantling precast concrete or stone slabs in walls, partition walls etc.including stacking within 50 metres lead : Thickness upto 40 mm |
| 6 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (For thickness of tiles 10 mm to 25 mm) (floor and wall tiles ) |
| 7 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge.Exposed pipe branches must be temporarily sealed with PVC caps/plugs to prevent foul sewer gases from entering the site during execution. |
| 8 | Dismantling Wash Basin and urinals of any size including dismantling of trap, unions, waste coupling, C.P. fittings etc., stacking useful materials within 50m lead and disposal of unserviceable materials into municipal dumps (within 50m) as per direction of Engineer-in-Charge.Main water supply must be isolated. Exposed water line threading must be sealed with heavy-duty GI or Brass dead-plugs (not temporary wooden pegs) to allow lines to be pressurized during civil work. |
| 9 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.The work shall include shutting off and disconnecting the immediate water-supply connection, flush pipe and brackets associated with the cistern. All live water-supply openings shall be temporarily capped or plugged during execution. No separate payment shall be made for such disconnection and temporary plugging. |
| 10 | Dismantling and removing the existing 100/110 mm diameter soil-pipe connection serving the existing floor-mounted W.C., including cutting and disconnecting the existing pan connector, socket, floor bend, elbow, offset, coupler, short pipe length and other immediately associated soil-pipe fittings, and separate P-trap or S-trap wherever provided, up to the nearest retained soil-pipe branch, junction or stack connection; removing existing clamps, supports and jointing materials; cleaning the retained pipe connection; temporarily sealing all live or retained soil-pipe openings with properly sized airtight PVC caps or plugs to prevent the entry of foul sewer gases; stacking serviceable material and disposing of unserviceable material and malba within the specified lead, all complete as directed by the Engineer-in-Charge. |
| 11 | Dismantling existing 100/110 mm diameter C.I. or uPVC SWR soil pipe fixed externally or concealed in floor, wall, duct or ledge, including cutting, disconnecting and removing pipes, sockets, couplers, bends, junctions, clamps and supports; temporarily sealing retained live pipe openings with properly sized caps or plugs; stacking serviceable materials and disposing of unserviceable material and malba within the specified lead, all complete as directed by the Engineer-in-Charge. |
| 12 | Dismantling of existing CP brass fittings (pillar cocks, bib cocks, health faucets, angle valves, flush valves).Salvage/Scrap belongs to client |
| 13 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. |
| 14 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 15 | Mechanical Removal of Decorative Flake Coating & Surface LevellingComplete mechanical removal of the existing decorative \\"flake paint\\" coating from interior column and wall faces down to the base plaster.Execution: Using heavy-duty mechanical wall grinders equipped with diamond-cup wheels and attached vacuum dust-extraction shrouds.Surface Levelling : Application of a 2mm to 3mm thick polymer-modified cementitious skim coat over the ground surface to fill deep gouges and restore a perfectly plumb and flat substrate.Final Prep: Sanding the skim coat smooth, ready to receive the acrylic wall putty and primer for the new PU trims.Inclusions: Rate includes all machinery, diamond consumables, skim coat materials, labor, scaffolding, and disposal of heavy dust/debris off-site |
| 16 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all Leads including all lifts involved. |
| 17 | Solid Brickwork Packing Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 18 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 19 | Cement Plastering (12mm)12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand). Work includes preparation of background by raking out joints, cleaning, and hacking of concrete/brick surfaces, applying plaster in line and plumb to match the existing wall plane, finishing smooth with a floating coat of neat cement, and proper curing for a minimum of 7 days prior to any timber/paneling application. |
| 20 | MASONRY LEDGE WALL :- Providing and constructing half-brick masonry (115mm thick) ledge wall using common burnt clay building bricks (class designation 7.5) in cement mortar 1:4 (1 cement : 4 coarse sand) to enclose plumbing cavities at the Urinal and WC zones, achieving a finished ledge projection of strictly 150mm (6 inches) from the existing structural wall.The work includes hacking the existing plaster and structurally anchoring the new masonry to the existing back wall using 8mm dia steel dowels set in chemical epoxy resin at 600mm intervals.The blockwork shall be built tightly around the pre-anchored concealed plumbing frames (leaving the 12mm FCB front-boards exposed) and must include side returns to fully enclose the cavity. The top of the ledge wall is to be finished with a 50mm thick PCC/RCC coping band to cap the cavity securely.Includes applying 12mm thick cement plaster (1:4 mix) on all exposed masonry faces. The mason must strictly coordinate the plaster thickness to align exactly flush with the front face of the 12mm Fibre Cement Boards mounted on the metal frames, providing a perfectly plumb, seamless, and continuous rigid substrate for the subsequent Corian cladding. |
| 21 | WPC Door Frames (Chaukhats) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, |
| 22 | (Door)Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.35 mm thick |
| 23 | Supply and Fixing of Dash Fasteners for WPC FramesProviding and fixing 10mm diameter x 100mm long (or suitable length as per site requirement) galvanized mild steel expansion hold fasteners (Dash Fasteners / Anchor Bolts) of approved make (e.g., Hilti / Fischer / Canon / Local Approved) for fixing WPC (Wood Polymer Composite) Door/Window Frames to the masonry/RCC opening. |
| 24 | Providing and fixing aluminium hanging floor door TWIN RUBBER stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Approved Make : La Reliant/Bharat Hardware/Azeen Enterprises/ as approved by EIC. |
| 25 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 26 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 27 | ROLLER BLINDS: Providing and fixing Fiber Plain Foldable Windows Roller Blinds all complete job as per specifications & shade as per directions of engineer in charge. Make: Vista material fabric type roller horizontal thickness 2mm pattern plain/ as approved by EIC. Approved Make : VISTA MAC OR EQUIVALENT AS APPROVED BY EIC |
| 28 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built-up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size. Finished with polyester powder coating to give an even shade with minimum thickness of 50 microns (Matte Black / Dark Anthracite).All dash fasteners used to anchor the aluminium frames to the masonry jambs must be heavy-duty, galvanized steel or SS 304 expansion bolts (minimum 8mm dia x 75mm length)Approved Makes : Aluminium Sections: Jindal, Hindalco, NALCO. Powder Coating: Jotun, AkzoNobel.or equivalent approved |
| 29 | Providing and fixing 6mm thick frosted Toughened (Tempered) Glass in existing aluminium window frames/sashes.Scope of Work:• Supply of glass with machine-polished edges.• Installation into glazing beads/grooves using existing EPDM gaskets.• Application of neutral cure structural silicone sealant (if required for additional weatherproofing).• Cleaning of glass surface after installation.Inclusions: All material, labor, transportation, handling, wastage, scaffolding (up to 2 floors), applicable taxes (GST), and labor cess.Approved Makes :- Saint-Gobain / Asahi / Modiguard or Equivalent as approved by EIC |
| 30 | Providing and fixing SS 304 grade heavy-duty concealed friction hinges to aluminium casement (openable) ventilators. Sized according to the weight and width of the glass shutter.Dorma, Kinlong, Ozone OR Equivalent as approved by EIC (Approved Makes) |
| 31 | Providing and fixing aluminium/zinc alloy locking handles for aluminium windows/ventilators, color-matched (powder-coated black) to the frames.Approved Makes : Dorma, Kinlong, Ozone OR Equivalent as approved by EIC |
| 32 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100X58X1.90 mm |
| 33 | Providing and fixing heavy-duty, premium quality Stainless Steel (SS 304 grade) solid extruded tower bolts (barrel type). Minimum size 150 mm length x 10 mm rod diameter (or 250 mm for taller doors as specified). Finished in a matte/satin brushed stainless steel. The item includes providing and fixing the matching SS receiver plate/socket and all necessary SS 304 counter-sunk screws1. For Fixing, M.S. screws are prohibhited. Only SS screws shall be usedApproved Makes: Godrej, Dorset, Hettich, Ozone, or Kich or equivalent as approved by EIC |
| 34 | SITC of Telescopic Top-Hung, Trackless Floor Bi-Parting Automatic Glass Door (corridors)1. SITC of heavy-duty automatic telescopic bi-parting glass door system for 2000mm opening and an overall assembly height varying from 2700 mm to 3000 mm from finished floor level up to the underside of RCC beam/slab, comprising 6-panel configuration (2 fixed + 4 sliding panels + top fixed) with multi-track arrangement to achieve min 1200 mm clear opening.2. Providing extruded aluminum track system with brushless DC motor, suitable for continuous duty and smooth synchronized operation.3. All aluminum components to be black powder coated (60–80 microns).4. Providing 12mm thick clear toughened glass (IS 2553 compliant) with polished edges .5. Including microwave/radar sensors, AIR safety sensors, concealed floor guides, digital program switch, electromechanical lock, and battery backup.6. Installation with proper anchoring to lintel/ceiling ensuring safe, stable, and vibration-free operation, complete in all respects. |
| 35 | Bi-Parting Automatic Sliding Glass Door (enterance):-Providing and installing a heavy-duty, commercial-grade automatic sliding door system in a Bi-Parting configuration (2 fixed outer glass partitions and 2 active sliding inner panels). Designed for an overall structural opening of 3.0 meters (W) x 2.7 meters (H), providing a fast-opening clear walkway of approximately 1.6 to 1.7 meters.Operator: Heavy-duty electromechanical operator designed for soffit-mounting directly beneath the structural beam/lintel. The motor and track mechanism must be specifically rated to carry the extreme dynamic load of 3.0-meter tall heavy glass leaves (minimum capacity of 120 kg per sliding leaf) while maintaining a slimline profile. |
| 36 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long |
| 37 | Sintered Stone Flooring (Large Format)Providing and laying 9mm to 12mm thick premium large-format Sintered Stone slabs (Minimum size: 1200mm x 2400mm ). Surface finish to be Silk with Warm Veined Calacatta pattern (e.g., gold/beige veining on off-white base) to match the approved veneer palette. Slabs to be laid over a well-cured, level screed using heavy-duty, polymer-modified cementitious adhesive (Type C2TES1 or S2). Work includes double-spreading (back-buttering the slab and troweling the floor), leveling using wedge-leveling systems, and filling joints (max 2mm) with color-matched, stain-proof epoxy grout. Rate includes all necessary mechanical handling (vacuum lifters), cutting, wastage, and final chemical cleaning. |
| 38 | Providing and fixing 18–20 mm thick factory-finished engineered quartz stone slab over window sills, in approved colour, shade and pattern, laid to line, level and required slope using manufacturer-approved polymer-modified adhesive, including surface preparation, cutting to required sizes and profiles, making openings, edge polishing, pencil-round/chamfered exposed edges, joints, matching neutral-cure silicone sealant at window-frame junctions, backing/support wherever required, cleaning and finishing, complete as per approved drawings and manufacturer’s specifications.Note: Sill shall project approximately 12–15 mm beyond the finished wall/WPC panelling face, unless otherwise shown in drawings (100 mm sill projection beyond the true wall/plastered wall face)Approved Makes: KalingaStone / Quantra / Johnson Marble & Quartz / AGL / Caesarstone or equivalent approved by the Engineer-in-Charge, subject to approval of actual slab, shade, pattern and physical sample before procurement. |
| 39 | Sintered Stone Skirting: Providing and fixing 75mm high projecting Sintered Stone skirting over continuous aluminum wall-framing.Base Preparation (Buildup): Providing and mechanically fastening an 18mm thick Wood Polymer Composite (WPC) or Boiling Water Proof (BWP IS: 710) backing board strip (75mm high) directly to the bottom-most section of the aluminum wall furring.Stone Cladding & Adhesive: Providing and fixing 9mm/12mm thick Sintered Stone (cut to 75mm height and matching the floor pattern) onto the 18mm backing board. The stone shall be bonded using a high-performance, two-component Polyurethane (PU) or Epoxy structural adhesive suitable for non-porous substrates (stone-to-wood/WPC).Geometry & Finishing: The total buildup must ensure the finished face of the stone skirting projects uniformly (approx. 7mm to 10mm) beyond the finished face of the 22mm upper wall paneling. The top exposed edge of the projecting sintered stone must be factory-machined and chamfered/polished to remove sharpness.Sealing: The bottom joint between the floor tile and the stone skirting must be sealed with a color-matched anti-fungal silicone sealant to prevent capillary water ingress during floor cleaning.Approved Makes:Adhesive: Laticrete (Latapoxy), Kerakoll (Superflex), ,Ardex Endura or approved equivalent.Board: Alstone (WPC), Greenply/CenturyPly (BWP). |
| 40 | MR Grade False Ceiling : Providing and installing 12.5mm thick Moisture Resistant (MR) grade Gypsum board (IS: 2095).Execution: Supported on hot-dipped galvanized steel grid. Joints taped and finished with 1 coat primer and 2 coats VOC-free, anti-fungal acrylic emulsion paint.India Gypsum, Saint-Gobain or Equivalent as approved by EIC(Base Rate: ₹50 / Sq.ft) |
| 41 | White Carrara Marble Flooring with Black Inlay BandingMain Flooring: Providing and laying 18-20mm thick premium White Carrara marble slabs in the main octagonal atrium area.Inlay Banding: Providing and flush-laying an 8-inch (200mm) wide band of 18-20mm thick Absolute Black Granite (or Nero Marquina marble) at two locations: the outer octagonal perimeter of the atrium, and the inner perimeter surrounding the 1.0m x 1.0m central podium.Bedding/Substrate: Laid over a 20mm to 25mm thick compacted cement mortar bed (1:4 ratio). |
| 42 | Aluminum Wall Furring (Sub-frame)Providing and fixing structural aluminum wall furring utilizing standard extruded tubular sections (e.g., 25mm x 25mm, 16 gauge minimum) fixed using L-cleat method to achieve zero datum line of plumb finish. The framework shall be erected strictly plumb and coplanar with a maximum tolerance of ± 1mm. Vertical and horizontal members to be spaced at a maximum of 600mm c/c, heavily cross-braced at load-bearing points , and anchored securely to the masonry via L cleats utilizing heavy-duty nylon dash fasteners and SS screws, including all necessary hardware.( Substrate common for both wall panelling). |
| 43 | 4mm Ply Packing (Flush Alignment)Providing and fixing 4mm thick commercial grade plywood packing strips over the aluminum framework.To be affixed exclusively to framework members receiving the 18mm HDHMR panels, ensuring coplanar alignment with the adjacent 22mm veneered panels.Approved Makes: Standard Commercial Grade or Equivalent as approved by Eng-in-charge. (Base Material Rate: ₹ 40 / Sqft) |
| 44 | HDHMR Paneling (18mm)Providing and fixing 18mm thick High-Density High Moisture Resistance (HDHMR) boards for solid grey and fluted elevation sections.Fasten over the 4mm packing strips utilizing rear-screwing techniques or concealed metal cleats to eliminate surface nail patching requirements.Approved Make : Action Tesa, Century Prowud or Equivalent as approved by Eng-in-charge. (Base Material Rate: ₹ 90 / Sqft) |
| 45 | Composite Veneered Paneling (22mm)Providing and fixing 22mm thick composite paneling comprising 18mm calibrated BWP plywood substrate machine-pressed with 4mm thick premium group-matched decorative wood veneer.Mandatory \\"Stacked Panel\\" installation. Panel segmentation must ensure continuous veneer grain flow across all horizontal aluminum dividing trims. To be fixed using Concealed mechanical fasteners. Pressing of veneer should be done under high tonnage mechanical press (Hand pressing prohibhited).Approved Make Substrate: Greenply, CenturyPly. Veneer: Turakhia, Greenlam, Euro Pratik or Equivalent as approved by Eng-in-charge. (Base Material Rate: Ply ₹ 130 / Sqft, Veneer ₹ 350 / Sqft) |
| 46 | Veneer Edge-BandingProviding and applying matching decorative wood veneer edge-banding to all exposed cut cross-sections.Must be applied and polished prior to final assembly abutting the metal trims to fully conceal the exposed plywood substrate core. Edges to be sanded with 220 and 400 grit sandpaper to achieve a seamless, rounded-over edge profile ready for PU polishing. Finish to match the approved veneer.Matching veneer species or Equivalent as approved by Eng-in-charge. (Base Material Rate: ₹ 25 / Rft) |
| 47 | CNC Routing (Flutes)Execution of precision CNC routing to form 8mm square-profile flutes on 18mm HDHMR board.Center out approach to be adopted for routing so that Slats are of equal sizes at two ends of the panel. Tooling must utilize a down-cut spiral bit to guarantee sharp 90-degree internal edges without surface burring. Flutes are of square profile 8mm deep and 8mm wide while 50mm is to be the Pitch/Gap between two Flutes to ensure a Slatted wall look |
| 48 | Architectural Metal Grid Trims (15mm)Providing and fixing 15mm x 18mm matte black anodized aluminum architectural solid flat bar/T-profile dividers.Mount directly to sub-frame using Silicone. Abut finished panels tightly against the metal profile using structural silicone sealant to eliminate visual gaps. Profiles must be architectural grade aluminum alloy 6063-T5. All horizontal and vertical intersections must be mitered at exactly 45 degrees |
| 49 | Matte Grey PU CoatingProviding and applying premium pigmented Polyurethane (PU) coating in matte grey finish on flat HDHMR surfaces.Multi-coat spray application over prepared surface. Final topcoat to be executed post-masking of CNC grooves. Mask adjacent veneer rigorously.Approved Make : ICA, Sirca, Asian Paints (Woodtech PU) or Equivalent as approved by Eng-in-charge. (Base Material Rate: ₹ 900 / Ltr) |
| 50 | Matte Black PU CoatingProviding and applying premium pigmented Polyurethane (PU) coating in matte black finish inside CNC grooves and on the recessed 12mm base.Execute via \\"paint first, mask later\\" protocol for grooves. Coating must extend 1mm over the board cut edges for seamless optical intersection with metal trims. ICA, Sirca, Asian Paints (Woodtech PU) or Equivalent as approved by Eng-in-charge. (Base Material Rate: ₹ 900 / Ltr) |
| 51 | Matte Clear PU Wood PolishProviding and applying premium clear Polyurethane (PU) wood polish in open-grain matte finish (10-20% sheen) over veneered surfaces.Execute open-grain finishing methodology to retain natural tactile wood texture. Avoid over-saturation of grain with sanding sealers.ICA, Sirca, Asian Paints (Woodtech PU) or Equivalent as approved by Eng-in-charge. (Base Material Rate: ₹ 850 / Ltr) |
| 52 | 18mm HDHMR SubstrateProviding and fixing 18mm thick High-Density High Moisture Resistance (HDHMR) board conforming to IS standards, installed over the aluminum framework to act as a monolithic structural substrate. Boards to be fastened using fully threaded, countersunk self-tapping screws at 300mm centers. Screw heads must be countersunk flush and sealed to ensure an absolutely flat, zero-tolerance surface for the subsequent application of acoustic PET panels.Fasten securely. Countersink all screw heads so the face remains perfectly flat for PET pasting.Approved Make :Action Tesa, Century Prowud or Eq as approved by E-I-C.(Base Rate: ₹ 90 / Sqft) |
| 53 | Frameless Magnetic Glass Whiteboard Providing, fabricating, and installing 8mm thick toughened extra-clear (low-iron) glass whiteboard. Glass to be back-painted with industrial ultra-white PU coating and laminated securely to a concealed GI/SS magnetic backing plate. Edges to be CNC machine-polished (flat edge with arris). Installation includes anchoring directly through the HDHMR substrate into the aluminum furring utilizing concealed heavy-duty structural keyhole hardware/Z-clips, ensuring flush alignment. |
| 54 | 9mm PET Acoustic Paneling (Two-Tone) Providing and installing 9mm thick premium Polyethylene Terephthalate (PET) acoustic panels (Minimum Density: 2000gsm, NRC 0.85+). Panels to be procured beige solid colors. Panels to be precision-cut to size and applied directly over the 18mm HDHMR substrate using heavy-duty synthetic rubber/neoprene-based contact spray adhesive. Alignment must perfectly surround the glass board.yielding a uniform 27mm total structural projection. |
| 55 | PET Grooving & Detailing Execution of V-groove joints between dissimilar colored PET panels (Grey and Beige). Work includes cutting of individual PET panels to the designated geometric grid as per drawing and machining a continuous 45-degree chamfer along the meeting edges using specialized trimmers. Panels to be pasted tightly edge-to-edge to form a crisp, seamless 90-degree V-groove without exposing the underlying HDHMR substrate. Work also includes maintaining a uniform 3mm flat shadow gap exactly at the perimeter junction of the PET panels and the glass whiteboard. |
| 56 | Heavy-Duty Terrazzo Flooring : Providing and laying 20mm thick factory-pressed pre-cast terrazzo tiles (IS: 1237), minimum flexural strength 3 N/mm².Laid on 20mm semi-dry cementitious screed (1:4). Joints grouted with pigmented slurry. Diamond polished on-site up to 400 grit. Includes pre-cast coved skirting (R=50mm).Bharat Floorings, Nitco or equivanlent as approved by EIC(Base Rate: ₹180 / Sq.ft) |
| 57 | Terrazzo Wall Dado : Providing and fixing 20mm thick pre-cast terrazzo tiles for wall cladding up to 1200 FFL.Fixed using Type C2TE polymer-modified adhesive on plumb plaster. NOTE: Dado will project outward from the main wall plane, acting as a stepped wainscot below the fluted tiles. Dado will run flat against the structural wall behind the Corian nib wall projection.Bharat Floorings, Nitco or equivanlent as approved by EIC (Base Rate: ₹180 / Sq.ft) |
| 58 | 3D Architectural Fluted Tiles : Providing and fixing 10mm thick fluted porcelain tiles. Water absorption ≤ 0.05% (IS: 15622).Installed above dado level using Type C2TE S1 highly deformable adhesive. Joints to be sealed exclusively with chemical-resistant epoxy grout (ANSI A118.3).Nexion, RAK Ceramics, Kajaria or equivanlent as approved by EIC(Base Rate: ₹160 / Sq.ft) |
| 59 | WPC / BWP Plywood Substrate for Vanity CountersItem: Providing and fixing 18mm thick waterproof backing board substrate over the M.S. structural space-frame to serve as a continuous rigid support for 12mm solid surface (Corian) washbasin counters.Material: The substrate shall be high-density Wood Polymer Composite (WPC) board or IS: 710 grade Boiling Water Proof (BWP) Marine Plywood.Installation: The board shall be cut to exact counter profiles and rigidly fastened to the upper and front chords of the M.S. tubular framework using self-drilling, counter-sunk metal screws at maximum 200mm intervals to ensure zero flex. The work includes all necessary precision cut-outs for drop-in or seamlessly integrated washbasins, coordinating perfectly with the steel voids below and the plumbing clearances. All exposed plywood edges (if used) must be sealed with waterproofing compound prior to Corian application.Make: WPC Board: Alstone, Floresta, Hardyplast.BWP Plywood: CenturyPly, Greenply, Kitply. |
| 60 | Solid Surface (Corian) Cladding for Masonry Plumbing LedgesItem: Providing and fixing 12mm thick 100% Acrylic Solid Surface cladding for concealed plumbing ledge walls.Scope & Execution: Cladding to be applied over the newly constructed 150mm thick masonry ledge walls for both Urinal and WC sections. The solid surface sheets shall be seamlessly bonded using manufacturer-approved acrylic adhesives to an intermediate 12mm WPC or BWP (IS: 710) plywood backing board, which shall be mechanically fastened to the leveled cement-plastered masonry ledge.Edge & Corner Detailing:Scope includes continuous cladding on the exposed side returns (approx. 150mm width) of the ledge wall.The Corian side returns shall butt against the Terrazzo wall dado at a 90-degree internal corner. A strict 2mm expansion gap must be maintained at this junction and continuously filled with color-matched anti-fungal silicone sealant.The top horizontal surface of the ledge shall be thermoformed/fabricated to a 15-20° downward slope to prevent water stagnation and placement of objects.Clearances & Cutouts:The item includes all precision CNC-routed flush cutouts for urinal sensors and WC pneumatic flush plates.Coordination Note (Cisterns): The 80mm slimline concealed WC cisterns are to be recessed into the original 230mm structural brick wall, with the 150mm masonry ledge wall constructed immediately in front of it to support this cladding.Approved Makes:Solid Surface: DuPont Corian, LG HI-MACS, or equivalent as approved by EIC.Sealant: Dow Corning, Pidilite, McCoy Soudal |
| 61 | PVD Metal Transition Profile : Providing and fixing SS 304 grade L-angle (25x10mm or custom step size) coated with PVD Titanium Gold.Embedded in adhesive at the horizontal transition plane between the flat dado and 3D fluted tiles. Profile to act as an L-shaped step-cap. The long edge must cover the exposed top thickness of the projecting terrazzo dado, while the top edge transitions cleanly to the recessed fluted tiles.Dorma, Hafele, Ozone or equivalent as approved by EIC(Base Rate: ₹100 / Rft) |
| 62 | Compact Laminate Cubicles : Providing and installing 12mm thick High-Pressure Compact Laminate (HPL) conforming to EN 438-4. Fire-retardant and anti-bacterial core.Execution: Floor-anchored utilizing heavy-duty SS 304 adjustable pedestals and extruded aluminum overhead top rail. Includes SS 304 auto-return hinges and privacy locks (Both pedestals and top rail to be matte black finish)Greenlam Sturdo, Merino or Equivalent as approved by EIC(Base Rate: ₹350 / Sq.ft) |
| 63 | Urinal Modesty Panel :Providing and fixing Urinal Modesty Panels (UMP) fabricated from a single undivided piece of 12 mm thick High-Pressure Laminate (HPL) height as per drawing compact board conforming to IS: 2046, with no intermediate joints permitted. The panels shall be completely water, moisture, and scratch-resistant with anti-bacterial properties, finished in the approved color and texture.All exposed edges of the board shall be CNC routered, perfectly chamfered, and smoothly polished to remove sharpness. The panel is to be firmly secured to the wall using heavy-duty Stainless Steel (SS 304 grade) continuous U-channels or robust L-brackets. |
| 64 | PAINT & FINISHING |
| 65 | NEW CEILING :- Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (quantity includes TWO COATS).Approved Makes : Putty: Birla White, JK Protomax or as approved by EIC |
| 66 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface havingVOC content less than 50 grams/litre (CEILING) |
| 67 | Wall painting two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coatswherever required to achieve even shade and colour. (CEILING).Paint: Asian Paints (Royale Matte), Dulux (Velvet Touch), Berger (Silk Glamor) OR AS APPROVED BY EIC |
| 68 | Wall painting with premium acrylic emulsion paint on existing surfaces. Work includes:1. Thoroughly scraping off all old flaking/blistered paint and rubbing down the surface with sandpaper.2. Applying acrylic wall putty strictly for minor touch-ups, dent filling, and leveling uneven patches.3. Applying one coat of water-thinnable interior cement primer over the entire wall to act as a uniform binding layer.4. Applying two or more coats of premium acrylic emulsion paint of approved brand and shade. All switchboards and skirting must be masked prior to painting.Paint: Asian Paints (Royale Matte), Dulux (Velvet Touch), Berger (Silk Glamor) OR AS APPROVED BY EIC |
| 69 | Supply and Installation of PU (Polyurethane) TrimsProviding and fixing high-density Polyurethane (PU) architectural moldings (40 MM width, 15mm projection) to the inner faces of columns to create a classical paneled aesthetic.Fixing Mechanism: Trims to be bonded directly to the plastered/primed wall surface using high-grab polyurethane construction adhesive (e.g., Sikaflex or equivalent).Mechanical Support: Temporary mechanical fastening using 23-gauge headless pin nails to hold trims perfectly plumb while the adhesive cures. |
| 70 | Surface Prep & Premium Emulsion Painting (Columns & Trims)Preparation and painting of the column surfaces, including the newly installed PU trims, to achieve a monolithic, high-end finish.Surface Preparation: Sanding the existing surface, applying one coat of acrylic wall primer, followed by two coats of premium acrylic wall putty to level the wall seamlessly with the trim edges.Base Coat: Sanding the putty smooth and applying a second coat of acrylic primer to seal the surface. |
| 71 | Providing and filling plumbing core cuts and pipe penetrations through the concrete slab with high-strength, non-shrink, free-flowing cementitious grout (e.g., Fosroc Conbextra GP2, SikaGrout 214, or equivalent). The work includes cleaning the annular gap of all dust and loose particles, formwork if necessary, and curing to ensure a watertight monolithic seal around the PVC/HDPE pipes |
| 72 | 12 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) to the floor and wall bases to create a smooth, leveled surface for the application of the waterproofing treatment, including curing and roughening the surface for mechanical key. The contractor shall coordinate the thickness of this leveling course with the subsequent waterproofing and terrazzo adhesive layers to guarantee that the final finished floor level remains flush with or lower than the adjacent outside corridors. |
| 73 | Providing and applying two coats of two-component, acrylic polymer-modified cementitious waterproofing coating (conforming to IS: 16471) to toilet floors and extending vertically up to 300 mm on walls (and 1200 mm in shower enclosures/wet areas).The work includes thorough cleaning of the substrate to achieve a SSD condition and providing a 10x10mm Polyurethane (PU) sealant cove (e.g., Sikaflex or equivalent) at all 90-degree wall-to-floor junctions and around pipe bases prior to the application of the coating.Make: Fosroc (Brushbond), Pidilite (Pidifin 2K), Sika (SikaTop Seal-107), or Equivalent as approved by EIC. |
| 74 | M.S. Box Framework for VanityItem: Providing, fabricating and installing a cantilevered double-layer M.S. box framework to support solid surface (Corian) washbasin counters.Fabrication: The framework shall be fabricated using M.S. square hollow sections (minimum 40x40x2mm conforming to IS: 4923). It shall consist of a top horizontal frame and a parallel bottom horizontal frame, fully welded together with vertical M.S. tube spacers to create a rigid box structure of approximately 150mm overall height. The entire steel frame must remain completely concealed behind the front drop (apron) of the vanity counter. The frame shall be custom-fabricated to leave clear cut-outs for the washbasins, ensuring the area below remains completely open for plumbing and suspended HPL enclosures.Anchoring: The rear horizontal tubes of both the top and bottom frames shall be rigidly fixed to the structural masonry/RCC wall using heavy-duty chemical epoxy anchors (minimum 12mm dia bolts set in epoxy resin) at a maximum spacing of 450mm center-to-center.Finishing: The rate includes all cutting, continuous welding, grinding of all joints to a smooth finish, and applying one coat of approved red oxide primer and two coats of anti-corrosive paint.Make: M.S. Tubes: Tata Structura, Jindal, Apollo. Chemical Anchors: Hilti, Fischer, Fosroc. |
| 75 | Providing and fixing premium frameless railing comprising 13.52 mm thick toughened laminated safety glass (6 mm + 1.52 mm structural interlayer + 6 mm), fixed in a continuous concealed architectural-grade aluminium base shoe/channel anchored to RCC or structural steel with approved chemical/mechanical fasteners.Railing shall have no vertical posts or intermediate members and shall be finished with a continuous black architectural-grade aluminium handrail, powder-coated in approved matte/satin finish. Item includes aluminium base channel, concealed anchoring system, EPDM gaskets, setting blocks, glass connectors, end caps, cover trims, sealants, edge-polished glass, necessary cut-outs, shop drawings, testing and complete installation as per approved design and structural requirements. |
| 76 | Providing and fixing minimum-joint laminated safety-glass roofing to an octagonal, faceted spherical skydome constructed with MS radial rafters, ring members and intermediate transoms, including all glazing profiles, gaskets, sealants, mechanical restraints and accessories, complete as per approved architectural, structural and fabrication drawings.Glass Specification: Providing 19.52 mm thick laminated safety glass, comprising:10 mm fully toughened, heat-soak-tested, low-iron glass.,Approved ivory ceramic-frit pattern permanently fused to the protected laminated face. |
| 77 | 1. Excavation and construction of RCC pad foundation (1.2m x 1.2m x 0.3m depth) using M25 grade concrete, reinforced with 10mm dia TMT bars @ 150mm c/c both ways in mesh form, including all labour, materials, centering, curing, and disposal of excavated earth.2. Providing, fabricating, and erecting MS structural skeleton of size 940mm x 940mm x 850mm using 75x75x4mm MS hollow square sections, comprising 4 vertical corner posts interconnected with horizontal members at base, mid-height, and top levels, all complete as per design.3. Supplying and fixing 50x50x3mm MS SHS diagonal cross-bracing on all vertical faces to ensure lateral stability and prevent racking.4. Providing 12mm thick MS base plates (150mm x 150mm) welded to vertical posts and anchoring the frame to RCC foundation using M16 heavy-duty mechanical expansion anchors (Hilti/Fischer or equivalent), ensuring proper alignment, leveling, and rigid fixing. |
| 78 | Marble Cladding & Decorative Paneling for Statue PodiumFinished Dimensions: 1.0m x 1.0m x 0.9m height.Substrate: 12mm thick Cement Fiber Board (Bison Board) fixed to MS skeleton using SS screws.Base Cladding: 20mm thick White Carrara Marble slabs with 45° mitered vertical corners for a seamless look.Top Slab: 30mm thick White Carrara Marble top with bullnose/chamfered edges, pre-drilled for statue bolts.Decorative Paneling: CNC-profiled 15-20mm thick Carrara marble moldings/trims applied to create the paneled aesthetic.Fixing: High-strength stone epoxy (Akemi/Tenax) and reinforced with concealed SS mechanical pins.Finishing: Joints filled with color-matched epoxy; final surface finished to a gloss texture.Quality Requirement: vein-matching (book-matching) across all four vertical faces of the podium. |
| 79 | Custom Bronze Statue of Sir M. VisvesvarayaSubject: Full-body standing figure of Sir M. Visvesvaraya in his signature formal attire (Suit, Mysore Peta/turban, and spectaclesScale: 2.0 meters (6.5 feet) net heightMaterial: High-grade statuary bronze (approx. 85-90% copper content).Casting Process: Lost-wax (Cire Perdue) method to ensure high-definition facial features and clothing textures.Thickness: Minimum average casting thickness of 6mm to ensure structural integrity.Internal Reinforcement: 304-grade Stainless Steel (SS) internal armature to prevent \\"slumping\\" over time.Finish: Traditional dark brown or antique bronze patina, finished with a high-grade microcrystalline weather-resistant wax.Mounting: Integral bronze base plate (Min. 15mm thick) with concealed heavy-duty SS anchor bolts for fixing to the MS podium skeleton. |
| 80 | Handling & Installation of Bronze Statue1. Contractor shall verify all access clearances prior to movement; if door clearance is <100mm, glass doors to be removed through authorized vendor.2. Provide continuous floor protection along movement path using 2mm rubber/neoprene sheets + 18mm plywood (properly jointed) to prevent damage to finished flooring.3. Movement shall be carried out using PU wheel pallet trucks / machine dollies only; steel wheels strictly prohibited.4. For final lifting, use portable A-frame gantry with certified chain pulley, supported on steel spreader plates to distribute load.5. Use nylon web slings only; direct contact of metal chains with statue or cladding is not permitted.6. Podium to be protected with 12mm plywood boxing during installation, leaving only fixing surface exposed.7. Statue shall be lowered vertically and aligned accurately; dragging on marble surface is strictly prohibited.8. Entire operation to be executed under supervision of EIC. |
| 81 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C |
| 82 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. |
| 83 | Group C |
| 84 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 85 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 86 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 87 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 88 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 89 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 90 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 91 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 92 | Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 5/6 amps switch |
| 93 | Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 3 pin 5/6 amp socket outlet |
| 94 | Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 6 pin 15/16 amp socket outlet |
| 95 | TV antenna socket outlet |
| 96 | Telephone socket outlet |
| 97 | Data socket outlet |
| 98 | Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C. Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg 1 Run of cable |
| 99 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 100 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. |
| 101 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cAutting the wall and making good the same in case of recessed conduit as required. |
| 102 | 20 mm Dia |
| 103 | Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. Make: Wire: Make: Havells, Ploycab, KEI, Conduit: AKG, Supreme, Precision |
| 104 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. |
| 105 | 75 mm X 75 mm X 60 mm deep |
| 106 | 200 mm X 125 mm X 60 mm deep |
| 107 | Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. |
| 108 | SUBHEAD II-INSTALLATION OF LIGHT FIXTURES, FANS & AC |
| 109 | Brush Less DIrect Current (BLDC) Motor Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al bodyPower Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (prefreably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req. |
| 110 | 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 111 | Supply and fixing hexagonal Round G.P.fan box approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. |
| 112 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 113 | LED Down lighter (COB Type) (System lumen efficacy ≥ 105 < 120lm/Watt) Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector. |
| 114 | 12 - 15 watt |
| 115 | Installation, testing, and commissioning of a 15-Watt surface-mounted rectangular/square LED panel light (Downlighter) suitable for direct ceiling mounting. The fixture shall comprise a robust pressure die-cast aluminium or high-grade engineering plastic housing with a white powder-coated finish and a high-efficiency glare-free PS/PMMA diffuser to ensure uniform light distribution. The light source shall be high-efficacy SMD LEDs ($\ge$100 lumens/watt) driven by a separate, constant current electronic driver (THD < 10%, Power Factor > 0.9, Surge Protection > 2.5kV) compatible with 230V AC, 50Hz supply. The scope of work includes marking the ceiling grid, securely fixing the luminaire using appropriate rawl plugs and screws, connecting the driver to the existing power point using heavy-duty connectors, and verification of lux levels and color temperature (4000K/6000K) as per site requirements. (Make: Philips, Havells, Wipro, Syska, or approved equivalent). |
| 116 | 12- 15 watt |
| 117 | Supply, Installation, Testing, and Commissioning (SITC) of heavy-duty, axial-flow window/ventilator-mounted exhaust fan suitable for institutional toilet ventilation.The unit shall comprise a corrosion-resistant metallic or high-impact engineering polymer die-cast body, dynamically balanced metal/polymer impeller, and a heavy-duty 100% copper-wound single-phase 230V/50Hz motor with IP44/IP54 protection and thermal overload protection. The fan shall be equipped with automatic/gravity-operated rear louvers (shutters) to prevent external air/rain ingress when not in use, and an integrated front wire guard/bird screen.The scope of work includes:Providing EPDM/neoprene anti-vibration rubber gaskets and weather-proof silicon sealing around the mounting cut-out.Coordination with the ventilator/glass agency for seamless mounting within the ventilator framework.All electrical connections including flexible PVC conduit, terminal block, and copper wiring up to the local isolator/switch (up to 2 running meters).Size & Airflow: 300 mm (12 inch) sweep / Minimum 900–1,100 CMH (530–650 CFM) capacity at ~1,400 RPM.Approved Makes: Crompton (Heavy Duty / Brisk Air), Havells (Ventilair DSP), Almonard, Usha, or Equivalent as approved by EIC |
| 118 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 119 | 6 way, Double door |
| 120 | 8 way, Double door |
| 121 | 12 way, Double door |
| 122 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 123 | Single pole |
| 124 | Supplying and fixing following rating, Double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 125 | 40 amp |
| 126 | 63 amp |
| 127 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 128 | Providing, supplying, fixing, testing & commissioning of recessed floor mounted metal floor box of approved make, complete with SS/Brass cover plate, suitable GI box, 6/16A modular socket outlet, switch, data + telephone/LAN points conduit, wiring, all accessories etc. complete as required. |
| 129 | Providing, fixing, testing & commissioning of 6W LED wall mounted light fitting complete with accessories, connections etc. as required.” |
| 130 | Supply, Installation, Testing and Commissioning of LED RGB/RGBWW/RG BNW/ RGBA/ RGBW (as per site requirement) Linear Profile / Wall Washer luminaire for Facade lighting with aluminium extruded/ Die Cast housing with inbuilt driver of following wattage as given below.The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°, having the rotation degrees scale shall be provided. The luminaire shall be IP66 protection also having silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. CRI>80, SDCM<5, THD<10%. as per IEC 61000-3-2, under voltage , over volatge protection, driver inbuilt surge protection of 4KV and external surge prootection (SPD) of 10 KV common mode/differential mode , Driver Efficiency>85%, EMI/EMC as per CISPR-15. There should be options of beam angles of 10/20/30/40/60, asymmetric degree.Luminaire should have efficacy of minimum 40 lm/W for RGB/RGBNW/RGBWW/TNW and 65 lm/W for mono colour options. Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by |
| 131 | Providing, installing, testing, and commissioning Rimless, vitreous china wall-hung WC pan (IS: 2556) with heavy-duty UF soft-close seat cover. Make: Kohler K-30306IN-0 or similar. Bolted directly to the concealed cistern's mounting frame through the plastered masonry ledge wall and Corian cladding.Make: Toto, Kohler, Roca, Grohe or Equivalent as approved by EIC.(Base Rate: ₹14,000 / Each) |
| 132 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restsMake: Hindware, Parryware, Cera, or Equivalent as approved by EIC |
| 133 | Providing, installing, testing, and commissioning a Slimline (80mm to 90mm depth) HDPE concealed flushing cistern equipped with a pneumatic dual-flush mechanism.The cistern must include a heavy-duty structural metal mounting frame (engineered for a min. 400kg load rating). To accommodate the 150mm deep ledge cavity, the frame shall be aligned flush with the front face of the masonry line and rigidly anchored to the true structural back wall using manufacturer-provided adjustable threaded extension brackets/studs, and bolted to the true floor slab using heavy-duty expansion fasteners prior to being encased in masonry.The work includes providing and fixing a 12mm thick Heavy-Duty Cement Fibre Board across the front face of the metal frame to serve as a rigid, continuous substrate for the Corian cladding.Includes routing the flush pipes and actuator plate seamlessly through the FCB board to sit exactly flush with the final Corian finish.Make: Geberit (Sigma 8cm), Grohe (Rapid SL Slim), Viega, or Equivalent as approved by EIC.(Base Rate: ₹5,500 / Each) |
| 134 | Pneumatic Flush Actuator Plates : Providing and fixing Vandal-resistant, SS 304 / Die-cast Zinc dual-flush actuator plate with polished chrome. Installed flush with the Corian ledge. Pneumatic hoses to be routed seamlessly to the concealed cistern.Geberit, Grohe, Viega or Equivalent as approved by EIC(Base Rate: ₹4,500/ Each) |
| 135 | Providing and fixing 8 mm dia C.P. / S.S. Jet (Health faucet with hose & bracket in polished chromey and make as approved by Engineer - in -charge. Make: Kohler (K-97258IN-CP) Jaquar |
| 136 | Providing and fixing Toilet paper holder (Stainless Steel). Make: Jaquar(AHS-1553) or Kolher |
| 137 | Providing and fixing white glazed vitreous china wall-hung urinal with automatic infrared sensor-operated flushing system, including sensor kit with control/solenoid valve, inlet connection, waste coupling/trap, outlet pipe, fixing brackets, CP/SS accessories, screws, sealant, cutting/chasing and making good wherever required, testing and commissioning complete as directed by Engineer-in-Charge.The urinal shall be first quality, free from defects, with smooth non-crazing glaze. Sensor flushing shall be battery/mains operated as approved, with automatic controlled flush operation. All joints shall be leak-proof, fixing shall be firm and properly aligned, and the complete installation shall be tested for sensor operation, flushing, drainage and leakage.Urinal mounted flush against Corian ledge. Sensor plate to be installed flush within the CNC cutout on the Corian panel.Toto, Kohler, Roca or Equivalent as approved by EIC(Base Rate: ₹22000 / Set) |
| 138 | Providing and fixing C.P. Brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore |
| 139 | Providing and fixing C.P. brass Angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 140 | Providing & fixing of storage type electric Hot water Geyser 15 Litre made out of heavy gauge steel jacket finished with rust proof baked-on glossy white enamel paint, inside glass lined heavy gauge copper tank, 25 mm thick polyurethane foam insulation, thermostatically controlled immersion heater with pilot neon lamp, replaceable magnesium anode bar, suitable for 8.0 bar maximum working pressure, cold water inlet and hot water outlet pipe, suitable length of electrical cable and 15 amp 3 pin plug top, complete in all respect including testing etc. (Horizontal/Vertical) (only for estimation) Make: Racold, Havells, Bajaj, Voltas & Crompton |
| 141 | Providing & fixing of Square showerhead with shower arm in polished chrome of approved quality & make and as per the direction of Engineer-in-charge. Make: Kohler K-22645IN-CP |
| 142 | Providing & fixing of Thermostatic recessed bath & shower universal trim in polished chrome of approved quality & make and as per the direction of Engineer-in-charge. Make: Kohler K-20742IN-9FP-CP |
| 143 | Solid Surface (Corian) Floating Vanity CounterItem: Providing and fixing 12mm thick 100% Acrylic Solid Surface for floating washbasin counters with drop apron.Fabrication & Geometry: The solid surface shall be seamlessly fabricated with a 150mm to 200mm vertical mitered front fascia (apron edge). This drop apron is strictly designed to entirely conceal the M.S. structural box-framework and WPC backing board behind it.Substrate Coordination: The Corian sheets shall be fully bonded using manufacturer-approved, color-matched acrylic adhesives directly onto the pre-installed 18mm WPC/BWP plywood substrate. Cutouts & Edge Finishing: Scope includes precision CNC-routed cutouts for washbasins, fixtures, and waste chutes. All visible Corian edges, specifically including the internal exposed rim of the waste chute cutout, must be machine-sanded and buffed to a seamless, non-porous, high-gloss/matte finish as per the approved sample.Clearances: The installation must perfectly coordinate with the structural voids below to accommodate the suspended HPL waste enclosures or standalone bins directly beneath the waste chutes.Approved Makes:Solid Surface: DuPont Corian, LG HI-MACS, or equivalent as approved by EIC.Adhesive: Manufacturer's proprietary seamless adhesive. |
| 144 | Suspended Waste Bin Enclosure: Providing and fixing cantilevered waste bin housing unit suspended from the vanity framework. Exterior clad with 12mm thick Synchronized Wood-Grain HPL (EN 438-4).Dimensional Constraints:• Outer HPL Enclosure: Approx. 350mm (H) x 200mm (W) x 250mm (D).Inner Bin Liner: 5L-7L capacity ABS/SS bin (Approx. 250-280mm H x 150-170mm W x 180-200mm D).Front panel to feature a tilt-out/hinged door using SS 304 concealed hinges for easy removal of the inner bin. |
| 145 | Seamless Integrated Basins with waste Grommets : Providing and fixing Under-mount basins thermoformed from 12mm acrylic solid surface of size as per approved drawing.Chemically welded to the underside of the vanity counter. Zero silicone joints allowed. Junction must be sanded and buffed to achieve a completely monolithic seam. Grommet must be flush-routed into the Corian top using a CNC template to prevent stress fractures in the acrylic surface.DuPont Corian, LG HI-MACS OR equivalent as approved by EIC(Base Rate: ₹9,000 / Each) |
| 146 | Backlit LED Mirrors : Providing, installing, and testing 5mm thick copper-free silver mirror (IS: 3438), pill-shaped, with CNC sandblasted border (min 30mm width). (minimum mirror size 450 mm x 800 mm )Illumination via 120 LEDs/m strip (IP65 rating, 4000K). Concealed SMPS driver (IP67). Suspended via PVD coated SS 304 loops.Saint-Gobain (Glass), Philips (LED) or Equivalent as approved by EIC(Base Rate: ₹9,000 / Each) |
| 147 | High-Velocity Hand Dryers : Providing, installing, and testing and commissioning V-shaped blade hand dryer, air speed >600 km/h, equipped with glass-fiber HEPA filter. Wall-mounted. Ensure concealed conduit wiring to a dedicated 15A MCB.Dyson Airblade V(Base Rate: ₹75,000 - ₹85,000 / Each) |
| 148 | Automatic Sensor Faucets (NEW): Providing, installing, testing, and commissioning Counter-mounted, infrared sensor-operated electronic faucet. Solid lead-free brass body with PVD Gold/Brass finish. Flow rate ≤ 1.9 LPM (0.5 GPM).Drilling in Corian using 35mm diamond core bit. Concealed control box mounting under counter with easy access. Dual power: 230V AC adapter with DC battery backup.TOTO (TLE Series), Kohler (Beitune), Artize (Tiara) or Equivalent as approved by EIC(Base Rate: ₹18,000 - ₹25,000 / Each) |
| 149 | Centralized Soap Dispenser : Providing and fixing Deck-mounted heavy-duty brass cast dispenser heads with PVD Gold/Brass finish.Multi-feed system plumbed via pneumatic tubing to a centralized 5L ABS reservoir securely mounted beneath the counter for top-filling.Bobrick, Euronics, Bradley or Equivalent as approved by EIC(Base Rate: ₹4,500 - ₹7,000 / Each) |
| 150 | Towel Dispenser : Providing and fixing Recessed SS 304 multi-fold paper towel dispenser Bobrick, Euronics or Equivalent as approved by EIC(Base Rate: ₹6,000 - ₹8,000 / Set) |
| 151 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof |
| 152 | Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes. 110 mm dia. (only for estimation) Make: Finolex, Polyraj, Supreme |
| 153 | Providing and fixing SWR PVC trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 110mm x 110mmX110mm (only for estimation). Make: Finolex, Polyraj, Supreme |
| 154 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Bend without door (45°) 110mm (only for estimation). Make: Finolex, Polyraj, Supreme |
| 155 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Y' Fitting without door 110mm (only for estimation). Make: Finolex, Polyraj, Supreme |
| 156 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Single Tee without door 110mm (only for estimation). Make: Finolex, Polyraj, Supreme |
| 157 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Coupler 110mm (only for estimation). Make: Finolex, Polyraj, Supreme |
| 158 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Clean Out Plug 110mm (only for estimation). Make: Finolex, Polyraj, Supreme |
| 159 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Vent Cowl 110mm (only for estimation) Make: Finolex, Polyraj, Supreme |
| 160 | Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc. For Wash basin & Urinal 40mm dia. Pipe (only for estimation) Make: Finolex, Polyraj, Supreme |
| 161 | Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc . Elbow (90°) 40mm (only for estimation) Make: Finolex, Polyraj, Supreme |
| 162 | Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc . Elbow (45°) 40mm (only for estimation) Make: Finolex, Polyraj, Supreme |
| 163 | Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc . T fitting 40mm (only for estimation) Make: Finolex, Polyraj, Supreme |
| 164 | Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc . Coupler 40mm (only for estimation) Make: Finolex, Polyraj, Supreme |
| 165 | Supply and fixing of UPVC S.W.R. pipe Nahni Trap size 100x75,110/90 mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali. Make: Finolex, Polyraj, Supreme |
| 166 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm. |
| 167 | Providing and fixing square-mouth S.W. Gully trap SP-1 complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size P type With common burnt clay FPS (non modular) bricks of class designation 75 |
| 168 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With common burnt clay FPS (non modular) bricks of class designation 7.5 |
| 169 | Providing orange colour safety foot rests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. |
| 170 | SUB HEAD - III - (WATER SUPPLY) |
| 171 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall / Terrace 20 mm dia nominal bore. Makes: Finolex, Astral, Supreme, Prince |
| 172 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall / Terrace 32 mm dia nominal bore. Makes: Finolex, Astral, Supreme, Prince |
| 173 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25mm dia nominal bore. Make: Leader PN25, Lehry Valves, Zoltp |
| 174 | Providing and fixing gun metal gate valve with wheel of approved quality. 32mm dia nominal bore. Make: Leader PN25, Lehry Valves, Zoltp Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender