Tender For Provision Of Drainage System Inside The Location Of Aer At Sn Line And Other Minor Work At Mdc Jhansi Under Age B/R-I Of Ge Jhansi
Tender Value
44 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
18 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Drainage System Inside The Location Of Aer At Sn Line And Other Minor Work At Mdc Jhansi Under Age B/R-I Of Ge Jhansi
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in Trenches not exceeding 1.5 mtr wide and not exc 1.5mtr deep for fdn etc in Hard/dense of soil and getting out, complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in Hard/Dense soil, complete all as specified and directed. |
| 3 | Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material & Labour for Plain cement concrete 1:4:8 type C2 using 40mm graded stone aggregate as in foundation filling and masss concrete complete all as specified and directed. |
| 5 | Material & Labour for brick work with sub class B bricks old size, straight or curved on plan exc 6m mean radius built in cm (1:4), complete all as specified and directed. |
| 6 | Material & Labour for Plain cement concrete (1:2:4) type B1 Using 20 mm graded stone aggregate in Kerbs / Copings/ bed plates and the like including weathering ,slightely rounded or chamfered angles and throating as directed including use of necessary formwork complete all as speified and directed. |
| 7 | Material & Labour for 15 mm thick rendering in CM (1:4) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed. |
| 8 | Material & Labour for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in drain and surface channel complete all as specified (Forming fair finished to drain/channels shall be measured and paiid seperately. |
| 9 | Extra for forming fair finished surfaces of drain or channels, inner girth 30 cms, using extra cement including forms, moulds mitred/ stoppedends etc., complete all as specified and directed. |
| 10 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed. |
| 11 | Taking down chowkhats with shutters (without taking off shutters from the frame) area but not exc 1.5 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed. |
| 12 | Supply & Fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of gradeAC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainlesssteel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 13 | Supply & Fix powder coated aluminium slinding window with two track outer frame suitable for sliding aluminium shutters, weight of aluminium setion not less than 0.55Kg/M of three track frame, including necessary joining cleats glazing clips rubber packing Powder coated aluminium shop beading screws with two shutter Including 5mm thick coloured glass and one shutter with stainless steel wire mesh including necessary locking arrangement , handle, aluminium grill of aperature size 50mm and 4mm dia etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender