Tender For special Repair For Re-Routing Water Maint/Distribution Network For Certain Location Under Ge (U) W/S, Delhi Cantt-10
Tender Value
2.38 Crore
Estimated cost
Bid Submission
17 Sep 2026
24 days left
EMD
3.13 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair For Re-Routing Water Maint/Distribution Network For Certain Location Under Ge (U) W/S, Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 metres wide and not exceeding 1.5 metres deep for pipe line in soft/loose soil, getting out and levelling of bottom surface to required level complete all as specified and directed by Engineer-in-Charge |
| 2 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr-in-Charge. |
| 3 | Removal of excavated material from site to a distance not exceeding 50 meters away and depositing where directed at a level not exceeding 1.5 meters above the starting point complete all as specified and directed by Engr-in-Charge. |
| 4 | Excavation in trenches by cutting of road crossing, PCC hard standing for taking out/laying of pipe lines including PCC (1:2:4) type B-2 (with 40 mm graded aggregate) in foundations, filling and mass concrete complete including making good the existing surface complete all as specified and directed. |
| 5 | Taking up/down old Cemented/GI/Nidhi/CI/MS Pipes including all fitting of the following sizes as specified and directed by Engineer-in-Charge :- |
| 6 | (a) 100 mm bore |
| 7 | (b) 150 mm bore |
| 8 | (c) 200 mm bore |
| 9 | (d) 250 mm bore |
| 10 | Supply, laying jointing, testing DI pipe with class-K-7 spigot socketed ends , conforming to IS-8329 laid in trenches of the following sizes as specified and directed by Engineer-in-Charge:- (Note : Tyton Joint, Excavation & earth work shall be measured & paid separetely.) |
| 11 | (a) 100 mm bore |
| 12 | (b) 150 mm bore |
| 13 | (c) 200 mm bore |
| 14 | (d) 250 mm bore |
| 15 | Supply, laying, jointing, testing of DI pipe with class-K-7 spigot socketed ends, conforming to IS-8329 in re-routing position all as per directions of Engr-in-Charge as per requirement of existing site, laid in trenches of the following sizes as specified and directed :- (Note : Tyton Joint, Excavation & earth work shall be measured & paid separetely.) |
| 16 | (a) 100 mm bore |
| 17 | (b) 150 mm bore |
| 18 | (c) 200 mm bore |
| 19 | (d) 250 mm bore |
| 20 | Taking up old GI steel tubing with connection including fittings all as specified and directed of the follwing sizes :- |
| 21 | (a) 15 mm bore |
| 22 | (b) 20 mm bore |
| 23 | (c) 25 mm bore |
| 24 | (d) 40 mm bore |
| 25 | (e) 50 mm bore |
| 26 | Supply & Laying of GI pipe mediun grade ISI mark including all fittings in old/new positions in trenches/wall/floor complete and making good the distributed surfaces as per existing as directed of following sizes. Note : Excavation and earth work will be measured and paid separately. |
| 27 | (a) 15 mm bore |
| 28 | (b) 20 mm bore |
| 29 | (c) 25 mm bore |
| 30 | (d) 40 mm bore |
| 31 | (e) 50 mm bore |
| 32 | Supply & Laying of GI pipe mediun grade ISI mark including all fittings in old/new in re-routing positions in trenches/wall/floor complete and making good the distributed surfaces as per existing as directed of following sizes:-Note : Excavation and earth work will be measured and paid separately. |
| 33 | (a) 15 mm bore |
| 34 | (b) 20mm bore |
| 35 | (c) 25mm bore |
| 36 | (d) 40mm bore |
| 37 | (e) 50mm bore |
| 38 | Supply & Fixing Gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed, including taking out unserviceable gate valve bore of pipe of following sizes complete all as specified and directed by Engineer-in-Charge:- |
| 39 | (a) 15 mm bore |
| 40 | (b) 20 mm bore |
| 41 | (c) 25 mm bore |
| 42 | (d) 40 mm bore |
| 43 | (e) 50 mm bore |
| 44 | Material and labour for DI specials like bends, tapers any type any radius and angle, Tee pieces single branch `Y' junction, double branch, cross (all sockets or socket and spigot) collars, MJ Collors DI connecting pieces one end flanged and other end spigot/socket, reducers/bell mouth pieces one end flanged and other end tapering as bell mouth for the size up to 250 mm dia bore complete all as specified and directed. |
| 45 | Material and labour for CI bends, tapers any type any radius and angle, Tee pieces single branch `Y' junction, double branch, cross (both all sockets or socket and spigot or flanged) collars, cast Iron connecting pieces one end flanged and other end spigot/socket, reducers/bell mouth pieces one end flanged and other end tapering as bell mouth for the size up to 250 mm dia bore complete all as specified and directed. |
| 46 | Material and labour for Rubber Gasket Joint (Tyton Joint) including jointing material for DI/CI pipe of following size/bore :- |
| 47 | (a) 100 mm bore |
| 48 | (b) 150 mm bore |
| 49 | (c) 200 mm bore |
| 50 | (d) 250 mm bore |
| 51 | Material and labour including jointing and testing of cast iron sluice valves class PN-1.0, conforming to IS:14846 flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and rubber gaskets including taking out unserviceable sluice valve and removal from site for the follwing sizes complete all as specified and directed :- |
| 52 | (a) 80 mm bore |
| 53 | (b) 100 mm bore |
| 54 | (c) 150 mm bore |
| 55 | (d) 200 mm bore |
| 56 | (e) 250 mm bore |
| 57 | Supplying, laying, jointing, welding and testing MS Pipe (Heavy class 'C') IS : 1239/3589, of followiing sizes laid in trenches or in Horizontal/Vertical/inclined position or laying on floors for connections for suction, to header and connected to outgoing water main CI/DI pipe line :- Note : MS Flanges including fabrication work will be measured and paid separately. |
| 58 | (a) 100 mm Dia |
| 59 | (b) 150 mm dia |
| 60 | Supply and fixing in replacement of MS flange 100 mm bore ,16mm thick duly welded with flange joint including nuts bolts, washer, rubber or fiber board gasket joint of size 100 mm size complete all as specified and directed |
| 61 | Supply and fixing in replacement of MS flange 150 mm bore ,16mm thick duly welded with flange joint including nuts bolts, washer, rubber or fiber board gasket joint of size 150 mm size complete all as specified and directed |
| 62 | Material and Labour for PCC (1:3:6) type C2 using 40mm graded stone crushed aggregate as in foundation for including fair finish even and fair to exposed surfaces without using extra cement complete all as specified and directed. |
| 63 | Boring holes under road pavement manually in any type of soil upto 350 mm bore complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender