Tender For Special Repairs To Bldg No P-323 Quarter Guard At Mil Stn Dhrangadhra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Sep 2026
16 days left
EMD
82000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Surendranagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No P-323 Quarter Guard At Mil Stn Dhrangadhra
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed. |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed. |
| 3 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 5 | Demolition of Brickwork or stone/ boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 6 | M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 7 | M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed |
| 8 | Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 20mm for sand stone and dressing to face stones and dressing of face beds and joints as specified ,of random rubble walling ,uncoursed or brought upto courses completed as specified and directed . |
| 9 | Dismantling floor ,hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and as directed . |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise proviceded for |
| 11 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 12 | Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 13 | M&L for cement concrete 25mm thick type B-0 (1:2:4) using 12.5 mm graded agg as in sub base to receive floor finishes. |
| 14 | M&L for machine cut kota stone slab flooring 18-20 mm thick with white marble all arond 150mm wide over and including 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshed polishing in complete all as specified. |
| 15 | M&L for machine cut kota stone slab, 18-20 mm thick in riser and thired single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and mirror finshed polishing complete all as specified and directed. |
| 16 | Rounding to edges of stone slabs one edge, such as steps, cooking plateform, and other similar situations complete all as specified and directed. |
| 17 | M & L, non skid White ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed |
| 18 | M & L, non skid White ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed |
| 19 | M & L, glazed coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.05 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed. |
| 20 | M&L for rubber moulded exterior grade joint less coloured tiles, 10mm thick, area exc 0.06 sqm but n.exc 0.38 sqm with grey cement and pigments set & jointed and pointed in neat cement slurry over and including 15mm thick cement screed bed in cm 1:6 with grey cement and pigments complete all as specified and directed. |
| 21 | M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:4 complete all as specified and directed. |
| 22 | M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 and finishing even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L for 5 mm thick rendering in CM 1:3 on ceiling, soffits, chajja projection etc complete all as specified and directed. |
| 24 | Preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a chalk whiting on plastered surface achive a smooth finish surface complete all as specified and directed. |
| 25 | Preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer chalk whiting on plastered surface to achive smooth finish surface complete all as specified and directed. |
| 26 | Preparing of plastered or unplastered old decorated surfaces of walls by complete removal of existing treatment, moulds, moss and efflorescent salt and treating oil and greasy spots and applying three coat of white wash on walls including cornices etc complete all as specified and directed |
| 27 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed. |
| 28 | M&L for preparation of old plastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed. |
| 29 | Preparation of New plastered surfaces of ceiling and applying Three coat of white wash on ceiling including cornices etc complete all as specified and directed. |
| 30 | Preparation of plastered or unplastered old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soots, treating oily/greasy spots, moss and efflorescence and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed. |
| 31 | S&F in repair 18/19 mm thick prelaminated particle board interior grade ,prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work in cup boards ,rebated or flat ege complete all as specified and directed. |
| 32 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast ,filling etc complete all as specified and directed. |
| 33 | S&F in repair Stainless steel Door hinges medium weight, cold rolled 100 mm size all as specified and directed. |
| 34 | M&L, preparing of Old wooden surface exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 35 | S&F standard aluminium section powder coated any colour as approved for door frames / shutters, window, ventilator frames/three track shutters sliding/fixed /louvered and partitions etc including jointing cleat and rubber beading/linning, Pivot ,locking aragement and fixed in position with stainless steel screws all as specified and as directed. |
| 36 | S&F anodized aluminium door & frame powder coating (minimum thickness of powder coating 50 micron) 2 mm thick incl 5.50mm thick tinted glass, fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No floor spring for each shutter complete all as specified and directed with following specifications :-(a) Aluminium door frame =101.50x44.45mm(b) Aluminium style/top & middle rails of shutter=83.5x44.45mm(c ) Aluminium bottom rail of shutter=114.50x44.45mm(d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed. |
| 37 | Supply and Fixing sheet glass 4 mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 38 | Supply and Fixing in repair ot 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 39 | S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 40 | S&F in repair galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 41 | M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 42 | Supply & Fix 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 43 | M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 44 | M&L, preparing old previously treated surface of wood and wood based surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on old decorated wooden surfaces, complete all as specified and directed. |
| 45 | S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 46 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed |
| 47 | S&F, aluminium, anodised barrel tower bolts 200mm long of extruded section and fixed complete all as specified and directed. |
| 48 | S&F , butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed. |
| 49 | S&F butt hinges ,heavy weight cold rolled mild steel 100mm size. |
| 50 | S&F in aluminium, anodised barrel tower bolts 150mm long of extruded section and fixed complete all as specified and directed. |
| 51 | S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 52 | Supply & Fix 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 53 | S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc(without sash bar), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass , etc size of members of shutters as specified in SSR part I ,section 8 clause 8.24(a) fitted to chowkats complete all as specified and directed. |
| 54 | S&F 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed . |
| 55 | S&F MS 300 mm ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed . |
| 56 | S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed |
| 57 | M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 58 | Dismantling Asbestos cement (Corrugated semicorrugated ,etc) sheets in roof coverings complete all as specified and directed. |
| 59 | M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed. |
| 60 | M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 61 | S&F for mild steel for roof truses (framed) ,trussed purlins crane gantires ,rails and fasternings and heavy bracket framming (beam tee angle channel or flat sections )including distance pieces , clats etc and confir to Fe-410-w (GdeE-250) quality A including one shop coat of zinc chrome primer complete all as specified and directed. |
| 62 | S&F MS angle iron framed work as in doors or gate of angle or other section conforming to Fe 290 (Gde E-165) with gusset plates rails braces etc complete including hangin galso fastenin gand fxing complete as specified and directed . |
| 63 | S&F in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe. |
| 64 | S&F in repairs Stop valves /Angle cock/ concealed stop valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe. |
| 65 | S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. |
| 66 | S&F in repair vitreous china squatting pan, orrisa pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including making good to disturbed floor with PCC complete all as specified and directed. |
| 67 | Supply & Fix in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe ,with PVC cover sheet in same colour etc complete all as specified and directed. |
| 68 | S&F in repairs PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed |
| 69 | Supply & Fix in repair vitreous china urinal, Half stall type, white (excluding flushing cistern) incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and as directed. |
| 70 | S&F C P Hand shower (health faucet) 1 mtr PVC tube with wall hook complete for EWC, all as specified and directed. |
| 71 | S&F in repairs Two way bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe. |
| 72 | S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete. |
| 73 | Dismantling of water tank & n exc 1000 ltr capacity in litres and removing to store |
| 74 | Supply & Fix 1000 litre capacity three layered rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed. |
| 75 | Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed |
| 76 | S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required complete complete all as specified and directed |
| 77 | Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed |
| 78 | S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required complete complete all as specified and directed |
| 79 | S&F, 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 80 | S&F in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed. |
| 81 | Supply & Fix in repair vitreous china wash hand basin white exclusive quality flat back of size 550x400 mm with and including CI brackkets ,32mm bore CP waste couplin glintel /out let PVC flixible waste pipe complete all as specified and directed. |
| 82 | Supply & Fix in repair 15 mm dia pillar tap (long nose)cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered \\"Hot or Cold\\" with long swan neck swivel type screwed for iron pipe and fixed complete all as specified and directed. |
| 83 | S & F Soap dish chromium plated approximate size 160x 160x90mm complete all as specified and directed. |
| 84 | S&F 5.5mm thick glass shelf of size 600mm long fancy type fixed and including Chromium plated grils, screws and wooden /plastic cleats complete all as specified and directed |
| 85 | S&F 5.5mm thick glass corner shelf assembly fancy type size 250mmx250mmfixed with and including chromium plates brass screws and wooden /plastic cleats complete all as specified and directed |
| 86 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 87 | S & F Aluminium Hat pegs of 6 pegs,solid body 125mm to 175 mm complete. |
| 88 | S & F Brass chromium plated shower rose 125mm size incl shower arm complete all as specified and directed. |
| 89 | S & F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 90 | Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed. |
| 91 | S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 92 | S&F in repairs, 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed. |
| 93 | S&F in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed. |
| 94 | S&F in repairs, 110mm bore PVC(SWR) bends any radius, complete all as specified and directed. |
| 95 | S&F in repairs, 75mm bore PVC(SWR) bends any radius, complete all as specified and directed. |
| 96 | S &F PVC (SWR) 75 mm dia vent cowl complete all as specified and directed. |
| 97 | M&L for 18-20 mm thick Granite (of any type of coloured) tiles maxhine cut in skirting/dado laid over cement screed and jointed with grey cement slurry ,and pointed with grey cement slurry ,and pointed with white cement with adimixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete. |
| 98 | M&L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm graded Stone aggregate) as in plinth protection finisheed even and smooth without using extra cement complete. |
| 99 | Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed. |
| 100 | M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed . |
| 101 | M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) (except block) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed . |
| 102 | M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work and demolition of existing cement work complete all as specified and as directed. |
| 103 | Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 104 | S&F in repair, 20mm dia, Harrison rails ,mild steel ,chromium plated with fixing brackets ,stps ,rollers etc complete all as specified and directed. |
| 105 | M & L for rubbing and polishing to existing old kota stone slab/marble/terrazzo flooring and skirting to achieve required finish complete all as specified and directed. |
| 106 | Demolition of reinforced cement concrete in any position not otherwise specifically provided for complete all as specified and directed. |
| 107 | M&L for RCC (Nominal Mix) type B0 1:2:4 12.5mm graded aggregate ) as in Beams, cantilevers ,bressummers lintels over 1.5 m span on walls,beams and columns etc complete all as specified and as directed. |
| 108 | Form work to side and soffits of floor or roof beams , beam haunching s , girders bressummers lintels , cantilevers , shelves including sup - ports ,overhangs etc also splays between floors ans beams etc . |
| 109 | M&L for MS TMT bars10mm dia and over cut to Length bent to shape required including cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips complete all as specified and directed. |
| 110 | M&L for RCC 1:1.5:3 type A-1 as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 111 | Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed. |
| 112 | S&F Steel windows with side hung shutters including Box type hinges with steel handle, and steel tower bolt complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 113 | S&F Steel windows with side hung shutters including Box type hinges with steel handle, and steel tower bolt, complete with out glazing bars, dovetailed or welded complete all as specified and directed. |
| 114 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 115 | M&L, preparation old previously treated steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on the steel surfaces, complete all as specified and directed. |
| 116 | S&F Machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 60 mm thickness ,M-35 Grade ,with grey cement & pigment interstion filled with sand and bedded with and including 50 mm thick sand cousion laid uniformly and duly compected with plate vibrator complete all as specified & as directed. |
| 117 | RCC NP3 150 mm diameter Pipes laid on150 mm thick PCC Cradle PCC 1:4:8 bed with excavation in depth 0.70m – 1.65 m in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional. |
| 118 | Dismantling wrought iron or mild steel work of any description not otherwise proviceded for complete all as specified and directed. |
| 119 | M&L for 25mm thick cement concrete type B-0,1:2:4 (12.5 mm graded aggregate) for roof padding finishing cement concrete surface even and smooth with out using extra cement complete all as specified and directed. |
| 120 | M&L cutting out cracks to V-section in existing roof slab or terrace, cleaning out, wetting, grouting, with cement sand slurry in 1:3 with mixing of WPC @ 2% by wt of cement complete all as specified and directed. |
| 121 | M&L for water proofing treatment to existing non-accessible roof slabs by providing 10mm thick bedding layer of cement morter 1:3 mixed with water proofing compound as per manufacturer's instruction and applying one coat of bituminous/polymerized primer confirming to IS-3384 @ 0.30 Ltr/Sqm and applying of one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm and laying of actetic polypropylene (APP) modified membrane pre-fabricated, reinforced with non-woven polyester of 3.50Kg/Sqm (minimum), 3mm thick (minimum), with minimum 75mm side overlaps and 100mm end overlaps and applying one coat of bituminous aluminium paint over APP membrane complete including taking down existing water proofing treatment with bedding layer of cement mortar complete and removal of debris out side of MD land all as specified and directed. |
| 122 | M&L for taking down , chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix , 40mm thk in two coats, using polymer SBR Latex or equivalent as approved @ 5 Ltrs per 50 Kg bag of cement complete all as per manufacturer's Specifications/instructions and as directed.Note :- (New reinforcement or Welded wire fabric) will be measured and paid separately) Make : Dr. Fixit/Sunanda/chemestik/Fosrok |
| 123 | S&F Hard drawn steel wire fabric cut to lengths , bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9 mm in dia supplied and fixed in reinforcement n exc 4 kg per sqm with frame in repair complete all as specified and directed |
| 124 | S&F plain aluminium sheeting 0.56mm thick , alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing ( length and girth as fixed). complete all as specified and directed. |
| 125 | M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm including cleaning the surface complete all as specified and directed. |
| 126 | S & F 1800mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 127 | S & F 2200mmx600mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 128 | S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed . |
| 129 | Taking down carefully aluminum/copper point wiring (light, fan, socket or power complete along with fittings such as switches, ceiling roses, bell, penden regulators sockets etc) and removing material will be taken as credit and making good the disturbed surface of wall, floor etc by making necessary plaster and painting as per the exisnting colour complete all as specified and as directed. |
| 130 | Taking down existing unserviceable MCB DB/TPN/SPN/SP along with MCBs complete removing and making necessary plaster and painting as per the exisnting colour complete all as specified and as directed. |
| 131 | Taking down existing unserviceable sub main wiring 2.5/4/6 Sqmm aluminium/copper cable all as directed. Please Enable Macros to View BoQ information |
| 132 | Taking down existing unserviceable sub main wiring 2.5/4/6 Sqmm aluminium/copper cable all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender