Tender For Repair/Maint To Water Treatment Plant And Other Pump/Motors Including Its Starter Panel Board Under Af Stn Phalodi.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Sep 2026
19 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint To Water Treatment Plant And Other Pump/Motors Including Its Starter Panel Board Under Af Stn Phalodi.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Garrison Engineer (AF), Air Force Station, Phalodi Name of Work : REPAIR/MAINT TO WATER TREATMENT PLANT AND OTHER PUMP/MOTORS INCLUDING ITS STARTER PANEL BOARD UNDER AF STN PHALODI. Contract No: GE (AF) PHALODI/ OF 2026-27 Serial Page No. Bidder Name : SCHEDULE 'A'(BOQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT TEXT # NUMBER TEXT NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER NUMBER # TEXT Srl.No. Item Description Item Code / Make Approx No of Units reqd Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes or for laying underground cable, pipe lines etc. in soft/ loose soil, complete all as specified & directed.Note:- Any excavation in SDR/Loose soil/PCC/Hardstanding/Interlocking tiles/Bituminous pavement shall be carried out by manual mode only irrespective of Tech/Residential area. In case of mechanical excavation engaged by the contractor, any fault due to rupturing of communication/power/any other utility lines shall be rectified by appropriate joint as per direction of Engr-in-Charge/GE/Stn Auth as deemed fir and no extra cost will be paid in this respect. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in soft / loose or hard dence soil complete all as specified and directed. |
| 4 | Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 5 | Supply & spread unwashed dry river sand for sand cushioning and covering the under ground cable in trenches. (Note :- Punning thickness shall be measured.) |
| 6 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm across the cable in trenches complete all as specified and directed. |
| 7 | Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes of 70 sqmm 3.5 core complete all as specified and directed.Note:- (i) Cable may be laid in trenches, under road, across the Nallah, along poles/walls and ducts etc.(ii) Excavation, earthwork, sand cushioning, cable cover, pipe for cable protection to be measured and paid separately. |
| 8 | Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes of 50 sqmm 3.5 core complete all as specified and directed.Note:- (i) Cable may be laid in trenches, under road, across the Nallah, along poles/walls and ducts etc.(ii) Excavation, earthwork, sand cushioning, cable cover, pipe for cable protection to be measured and paid separately. |
| 9 | Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes of 35 sqmm 3.5 core complete all as specified and directed.Note:- (i) Cable may be laid in trenches, under road, across the Nallah, along poles/walls and ducts etc.(ii) Excavation, earthwork, sand cushioning, cable cover, pipe for cable protection to be measured and paid separately. |
| 10 | Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes of 25 sqmm 4 core complete all as specified and directed.Note:- (i) Cable may be laid in trenches, under road, across the Nallah, along poles/walls and ducts etc.(ii) Excavation, earthwork, sand cushioning, cable cover, pipe for cable protection to be measured and paid separately. |
| 11 | Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes of 16 sqmm 4 core complete all as specified and directed.Note:- (i) Cable may be laid in trenches, under road, across the Nallah, along poles/walls and ducts etc.(ii) Excavation, earthwork, sand cushioning, cable cover, pipe for cable protection to be measured and paid separately. |
| 12 | Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes of 10 sqmm 2 core complete all as specified and directed.Note:- (i) Cable may be laid in trenches, under road, across the Nallah, along poles/walls and ducts etc.(ii) Excavation, earthwork, sand cushioning, cable cover, pipe for cable protection to be measured and paid separately. |
| 13 | Supply and laying in trenches 15 mm bore steel water tubing, galvanized, medium grade, with all fittings such as bends, tees, union etc., and including testing complete all as specified and directed. |
| 14 | Supply and laying in trenches 20 mm bore steel water tubing, galvanized, medium grade, with all fittings such as bends, tees, union etc., and including testing complete all as specified and directed. |
| 15 | Supply and laying in trenches 25 mm bore steel water tubing, galvanized, medium grade, with all fittings such as bends, tees, union etc., and including testing complete all as specified and directed. |
| 16 | Supply and laying in trenches 40 mm bore steel water tubing, galvanized, medium grade, with all fittings such as bends, tees, union etc., and including testing complete all as specified and directed. |
| 17 | Supply and laying in trenches 50 mm bore steel water tubing, galvanized, medium grade, with all fittings such as bends, tees, union etc., and including testing complete all as specified and directed. |
| 18 | Supply and laying in trenches 80 mm bore steel water tubing, galvanized, medium grade, with all fittings such as bends, tees, union etc., and including testing complete all as specified and directed. |
| 19 | material & Labour for cutting of Bitumin/RCC road/hardstanding upto a size not exceeding 20 cm in width and not exceeding 60 cm in deoth for laying of cable / pipe and finished surface by extracted material and provided with 150 mm thick PCC (1:3:6) type C2 as top layer to match the existing surfaces and remove surplus extracted material 50 m away complete all as specified and directed. |
| 20 | M&L of Preparation of old painted steel surfaces of panel body of any size incl scrapping old paint, denting and applying two coats of spray paint using synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 21 | M&L for complete removal of existing paint of Elect motor with pump including base frame and applying two coats of spray paint using synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 22 | M&L for complete removal of existing paint of pipeline of dia 80 mm to 150mm, including base frame and applying two coats of spray paint using synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 23 | M&L for complete removal of existing paint of pipeline of dia 200mm to 300mm, and applying two coats of synthetic enamel paint over a one coat of red oxide primer complete all as specified and directed. |
| 24 | M & L taking out openwell submersible pump of capacity upto 5 HP after disconnecting electrical connections, dismantling motor and rewiding the same with super enamelled copper winding wire of existing gauge including varnishing, baking, cotton tape and greasing of bearings, bushes and other connected parts, reassembling and fixing the same in its original position including replacement of unserviceable nut-bolts, washer, lugs, terminal plate and making proper electrical connection complete all as specified and directed. |
| 25 | M&L for taking out of Elect Motor 40 HP Capacity installed as motor from foundation after disconnecting electrical connections, dismantling motor and rewiding the same with super enamelled copper winding wire of existing gauge including varnishing, baking, cotton tape and greasing of bearings, bushes and other connected parts, reassembling and fixing the same in its original position including replacement of unserviceable nut-bolts, washer, lugs, terminal plate and making proper electrical connection complete all as specified and directed.Note : - (i) Bearing if required for replacement shall be paid seprately (ii) Transportation of motor is included in the unit rate of items nothing extra shall be paid on this account |
| 26 | Ditto as per serial item No.24 here-in-above but motor of capacity 20 HP complete all as specified and directed. |
| 27 | Ditto as per serial item No. 24 here-in-above but motor of capacity 15 HP complete all as specified and directed. |
| 28 | Ditto as per serial item No. 24 here-in-above but motor of capacity 10/12.5 HP complete all as specified and directed. |
| 29 | Ditto as per serial item No. 24 here-in-above but motor of capacity 5/7.5 HP complete all as specified and directed. |
| 30 | Ditto as per serial item No. 24 here-in-above but motor of capacity 2 & 3 HP complete all as specified and directed. |
| 31 | Dismantling defective centrifugal/monoblock pump set , assembled with 40 HP elelctric motor, dismantling the pump set for carrying out repair / replacement of unserviceable parts such as CI impeller, ball bearing etc. reassembling, installing, commissioning and testing complete all as specified and directed.Note :(i) CI impeller, Bush & ball bearing required to replace shall be measured and paid for separately under respective items of BOQ as “Supply only”.(ii) The cost of transportation is included in the unit rate of this item nothing extra shall be paid on this account. |
| 32 | All as per serial item No 30 here-in-above but pump set assembled with 20 HP elelctric motor |
| 33 | All as per serial item No 30 here-in-above but pump set assembled with 15 HP elelctric motor |
| 34 | All as per serial item No 30 here-in-above but pump set assembled with 10 /12.5 HP elelctric motor |
| 35 | All as per serial item No 30 here-in-above but pump set assembled with 7.5 HP elelctric motor |
| 36 | All as per serial item No 30 here-in-above but pump set assembled with 5 HP elelctric motor |
| 37 | All as per serial item No 30 here-in-above but pump set assembled with 2&3 HP elelctric motor |
| 38 | Supply only ball bearing suitable for centrifugal Pump set assembled with 40 HP motor complete all as specified and directed. |
| 39 | Ditto as per serial item No 37 here-in-above but assembled with 20 HP Motor |
| 40 | Ditto as per serial item No 37 here-in-above but assembled with 15 HP Motor |
| 41 | Ditto as per serial item No 37 here-in-above but assembled with 10 /12.5 HP Motor |
| 42 | Ditto as per serial item No 37 here-in-above but assembled with 7 .5 HP Motor |
| 43 | Ditto as per serial item No 37 here-in-above but assembled with 5 HP Motor |
| 44 | Ditto as per serial item No 37 here-in-above but assembled with 2/3 HP Motor |
| 45 | Supply only impeller of monoblock pump of capacity 20 HP pump complete all as specified and directed. |
| 46 | Supply only impeller of monoblock pump as per existing model of capacity 05 to 15 HP pump complete all as specified and directed. |
| 47 | M&L for taking out of Air blower 735 cum/hr Capacity installed as blower from foundation after disconnecting electrical connections, dismantling motor and rewiding the same with super enamelled copper winding wire of existing gauge including varnishing, baking, cotton tape and greasing of bearings, bushes and other connected parts, reassembling and fixing the same in its original position including replacement of unserviceable nut-bolts, washer, lugs, terminal plate and making proper electrical connection complete all as specified and directed.Note : - (i) Bearing if required for replacement shall be paid seprately (ii) Transportation of motor is included in the unit rate of items nothing extra shall be paid on this account |
| 48 | M & L for taking out of submersible pump set of any capacity alongwith column pipe 80/50 mm dia and cable from the bore well of encasing pipe 200 mm bore (length approx 170 mtr) after dismantling existing GI bend 80/50 mm bore from NRV and disconnecting submersible cable from starter complete all as specified and directed.Note :- The quoted rates shall be deemed to include for requisite T&P, equipments, transportation etc. |
| 49 | M&L for lowering down of submersible pump set of any capacity alongwith connected items such as column pipes & submersible cable (length approx 170 mtr) re-connecting, commissioning and testing complete all as specified and directed.Note :- The quoted rates shall be deemed to include for requisite T&P, equipments, transportation etc. |
| 50 | M&L for dismantling of 40/30 HP capacity submersible pump, multi stage examining for worn out/defective parts and renewal defective parts, cleaning properly, thereafter reassembling the pump, commissioning and testing complete all as specified and directed. |
| 51 | M & L for rewinding of 40/30 HP submersible pumps motor, electric driven 415 Volt, 50 Hz, 3 phase AC supply with super enamelled Copper winding wire of suitable/existing gauge, ISI marked, including all insulated material such as adhesive, insulating paper steeves, tape etc. and connected works for rewinding & including , assembling and reassembling the motor complete all as specified and directed. Note :- The quoted rates shall be deemed to include dismantling, removal of old winding wire, cleaning of slots and reassembling complete. |
| 52 | S&F as in replacement coupling assembly as per existing model & make suitable for centrifugal pump set assembled with 40/30 HP motor complete all as specified & as directed. |
| 53 | Supply only Upper and lower rubber housing bush, 3 phase, 50 Hz AC submersible motor of 40 HP capacity for replacement (here-in-before) complete all as specified and directed. |
| 54 | All as per item No.50 above but Stainless steel rotor sleeve complete all as specified and directed. |
| 55 | Supplying, laying & jointing in replacement submersible cable flat type, copper conductor of size 10 Sqmm 3 core complete all as specified & as directed. |
| 56 | Ditto as per serial item No.54 here-in-above but 6 Sqmm 3 core. |
| 57 | S&F in replacement cooling fan with locking aluminum cast type screw, as per existing type, suitable for monoblock pump motor of any capacity complete all as specified & as directed. |
| 58 | S&F gland rope of size 10 mm or as required complete all as specified & as directed. |
| 59 | S&F gland rope of size 8 mm or as required complete all as specified & as directed. |
| 60 | Ditto as per item No.50 above but Carbon thrust bearing complete set complete all as specified and directed. |
| 61 | Ditto as per item No.50 above but Upper and lower CI housing complete all as specified and directed. |
| 62 | S & F in renewal of 3 pole power contactor 80 Amps with AC coil, AC 3 duty rating at 415 Volts, 50Hz and Coil Voltage as specified at site of motor starter complete all as specified and directed. |
| 63 | S & F in renewal of 3 pole power contactor 60 Amps with AC coil, AC 3 duty rating at 415 Volts, 50Hz and Coil Voltage as specified at site of motor starter complete all as specified and directed. |
| 64 | S & F in renewal of 3 pole power contactor 40 Amps with AC coil, AC 3 duty rating at 415 Volts, 50Hz and Coil Voltage as specified at site of motor starter complete all as specified and directed. |
| 65 | S & F in renewal of 3 pole power contactor 25 Amps with AC coil, AC 3 duty rating at 415 Volts, 50Hz and Coil Voltage as specified at site of motor starter complete all as specified and directed. |
| 66 | S&F in replacement Digital type multifunction meter( V,A,F,PF) meter,as per existing size, class -1, incl internal wiring with 1.0 sqmm single core PVC wire etc complete all as specified & as directed. |
| 67 | S&F in replacement volt meter analog type, three phase AC 440 volt , incl internal wiring with 1.0 sqmm single core PVC wire etc complete all as specified & as directed. |
| 68 | S&F in replacement overload relay range 28 - 40 Amp, suitable for 30 HP motor, 3 phase, 415 volt, 50 Hz as per sample complete all as specified and as directed. |
| 69 | S&F in replacement overload relay range 45-65 Amp, suitable for 40 HP motor 3, phase 415 volt, 50 Hz as per sample complete all as specified and as directed. |
| 70 | S&F for mild steel work as Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W coplete all as specified and directed. |
| 71 | M&L in repair Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/well, fixed with self tapping screws as specified and directed. |
| 72 | S & F in renewal of automatic star delta Submersible motor starter in steel sheet enclosure AC 3 phase, 415 Volts, 50 Hz type MUG with single phase preventer, dry run preventer, overload protection, reverese phase protection suitable for 40 HP submersible pump set complete all as specified and directed. |
| 73 | S & F in renewal of automatic star delta Submersible motor starter in steel sheet enclosure AC 3 phase, 415 Volts, 50 Hz type MUG with single phase preventer, dry run preventer, overload protection, reverese phase protection suitable for 30 HP submersible pump set complete all as specified and directed. |
| 74 | S & F in renewal of DOL submersible pump starter in steel sheet enclosure AC 3 phase, 415 Volts, 50 Hz type MUG with single phase preventer, dry run preventer, overload protection, reverese phase protection suitable for 20/15 HP submersible/monoblock pump set complete all as specified and directed. |
| 75 | S & F in renewal of DOL Submersible motor starter in steel sheet enclosure AC single phase, 230 Volts, 50 Hz type MUG with single phase preventer, dry run preventer, overload protection, reverese phase protection suitable for 10/5 HP submersible/monoblock pump set complete all as specified and directed. |
| 76 | S&F in replacement single phase preventer type SDz5, SPPR + Timer, 415 V including necessary copper connection, lugs etc complete all as specified & as directed. |
| 77 | S&F in replacement on / off switch (push button) complete all as specified & as directed. |
| 78 | S&F in replacement indicating lamp with holder and cover as per existing complete all as specified & as directed. |
| 79 | Supply and fix in repair fully electronic automatic water level indicator with indicate 12 different level of the tank suitable for use at water supply installations etc complete all as specified and directed. |
| 80 | Supply and fixing in repair electronic water pressure switch pressure range 0 to 14 bar complete all as specified and directed. |
| 81 | Supply and laying in replacement rubber mat of size 2 m x 1 m x 19mm thick complete all as specified and directed by Engineer-in-charge. |
| 82 | Supply and fix in repair pressure gauge water meter of pressure range 0-10 kg/Sqcm complete all as specified and directed. |
| 83 | M & L for Earthing complete with GI plate 60cm×60cm×3 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. |
| 84 | S&F in replacement MCCB 4 Pole 63 Amps, thermal magnetic release having, breaking capacity 25 KA, 415 Volt in the existing feeder pillar box from main bus bars, making necessary welding work, metal work for fixing base plate etc and connections complete all as specified and as directed. |
| 85 | All as per item No. 83, here-in-before but MCCB 4 Pole, 100 Amps rating, breaking capacity 25 KA, 415 Volt complete all as specified and as directed. |
| 86 | All as per item No.83, here-in-before but MCCB 4 Pole, 125 Amps rating, breaking capacity 25 KA, 415 Volt complete all as specified and as directed. |
| 87 | Supply & fix in renewal of RO membrane suitable for discharge 2.5 Cum/Hr capacity RO plant (model 4040), Type - Cross linked fully aromatic polymide composite, MOC - Cellulose Polyamide, Salt Rejection % - 99.0 to 99.7, including connected accessories complete all as specified and directed. |
| 88 | Supply & fix in renewal of RO membrane suitable for discharge 3.0 Cum/Hr capacity RO Plant (Model 8040), Type - Cross linked fully aromatic polymide composite, MOC - Cellulose Polyamide, Salt Rejection % - 99.0 to 99.7,including connected accessories complete all as specified and directed. |
| 89 | M & L for repair and servicing, testing of Chemical dosing (Metering) Pump electromagnet type with suction & discharge tubing, Spring loaded anti siphon valve, foot valve and replacement of broken storage tank 500 ltr capacity etc complete all as specified and directed. |
| 90 | S&F in repair PVC double layer rotational moulded polyethylene water storage tank (cylindrical vertical with close top ) hoisted and fixed in position, marked capacity 500 ltr complete all as specified and directed. |
| 91 | S&F in repair PVC double layer rotational moulded polyethylene water storage tank (cylindrical vertical with close top ) hoisted and fixed in position, marked capacity 5000 ltr complete all as specified and directed. |
| 92 | S & F in renewal of rubber gasket at both ends of flanged column suitable for GI column pipe of 80/50 mm dia complete all as specified and directed. |
| 93 | M & L in renewal of nut and bolt with washer, heavy grade suitable for GI flanged column pipes of 80mm dia complete all as specified and directed. |
| 94 | M & L in renewal of GI column pipe 6 meters length, medium grade, 80/50 mm bore dia with welded flages at both ends and including dismantling holes/spot in flange complete all as specified and directed. |
| 95 | M & L for taking down old unserviceable sluice valve and Supply, install, connecting and testing of 150 mm bore sluice valve, class PN- 1.6 flanged ends, with CI body, wheel and brass spindle and nuts etc, non rising type marked including jointing materials i.e. rubber gaskets, nuts, bolts etc complete all as specified and directed. |
| 96 | Ditto as per Item No 94 above but 100 mm bore sluice valve |
| 97 | Ditto as per Item No 94 above but 80 mm bore sluice valve |
| 98 | S&F in replacement 150 mm dia butterfly valve complete all as specified and directed. |
| 99 | Ditto as per Srl item No 97 above but 100 mm dia bore. |
| 100 | Ditto as per Srl item No 97 above but 80 mm dia bore. |
| 101 | M & L for taking down old unserviceable Non return valve and Supply, install, connecting and testing of 100 mm bore Non returning valve, class PN- 1.6 flanged ends double ball type , with CI body, non rising type IS- marked including jointing materials i.e. rubber gaskets, nuts, bolts etc complete all as specified and directed. |
| 102 | Ditto as per Item No 100 above but 80 mm bore Non return valve. |
| 103 | S&F in repair 35/36 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source and connecting with suitable size weather proof cable from fittings to the jucntion box and fixing to complete all as specified and directed. |
| 104 | S & F street light GI bracket of 0.6 mtr long made out of 25 mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 24mm x 3 mm including nuts bolts & washers complete necessary fixing arrangements on pole complete all as specified and directed. |
| 105 | Supply, install, test and commissioning factory made THERMOPLASTIC/HDPE CABLE JUNCTION BOXES IP 66/67 “weather proof”, with terminals for outdoor installation (with knockouts for cable entry) of size 205mm x 255mm x 112 mm depth with cable entry size of 10-25 sqmm with terminal incl Aluminium bus bar of 63amp-04 Nos and MCB SP 6amp-01 complete all as specified and directed ,. |
| 106 | S&F in repair of automatic street light switch using Infrared Sensor based NATURE SWITCH for automatic switching of street lights. Nature switch operation switch operation should be based on Natural light Lux level. Required illuminance level for Switching ON is<= 30 lux and for switching OFF>=10 lux. The sensor should also have part night operation facility of min 4 hours to max 12 hours. The sensor along with suitable Power contactors, incoming-outgoing MCB's and Auto manual(Sensor By-pass) selection option should be enclosed in a pole/wall mountable Enclosure made of Rust Proof, Electric Shock Proof, termite proof and FR grade SMC Junction box conforming to IP54. For Single phase load of 5 KW(Swadeep-02EC5kW1P) with: 1Nos contactors, 1 nos incoming MCB's & 1nos outgoingMCB's of 10-25 Amps each & circuit wiring (copper)of min 6 sqmm complete all as specified and directed. |
| 107 | S&F new generation energy saving and environmental friendly long life varsatile pressure die cast aluminium IP66 road way light fitting with high power LED as light source of capacity 60 watts (Surge protection of the light should be 10 KV )with suitable drivers etc , fixing to wall / pole with complete all as specified and directed. |
| 108 | Supply and fixing in replacement of Lithium base Energy efficient integrated Solar street light of 30/32 watt in Aluminium Die casting body / FRP Bpdy ,corrosion resistance,integrated PV panel Automatic dusk to input voltage 12.8V with suitable battery ,Driver efficiency .85%,PV module itself will be used to sense the ambient light to switch ON/OFF the Lamp,inbuilt MPPT charge controller,IP65,both PIR and fixed dimming available,4500 lumens (at full brightness) with grater than 150 lumen per watt,5700ANSI,cool white(5500K-6500K),CRI.70,moptical used, Metal core PCB,Low voltage cutoff ,high power LED,wide beam Angle(120 degree) LED Life 50000 hrs,weight less than 15 kg with GReen/Red indicator swith with suitable battery rating 12.8V-BIS standard of complete specified & directed. |
| 109 | Supply and fix in replacement of IP65 rated LED Bollard with soft 360 deg light distribution with base plate and necessary foundation and connected electric connections and PCC work complete and IP 65/66 complete all as specified and directed. |
| 110 | Supply jointing connecting in repair and testing, straight through joint, epoxy based complete with jointing material and all standard accessories suitable for XLPE insulated armoured aluminium conductor cable, LT 1100 Volts, aluminium conductor of 10/16/25/35 Sqmm suitable for 4 core complete all as specified and as directed. |
| 111 | S & F in repair PVC insulated stranted copper conductor cable of size 1.5 sqmm x 3 core from Junction box to street light complete all as specified and directed. |
| 112 | Supply and fix in repair LED Type Aviation obstruction light comprising of aluminium housing with polycarbonate enclosure, 302 Nos. LED are provided fixed in position complete all as specified and directed. |
| 113 | Supply and fixing in repair post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. |
| 114 | Supply only Ferric alum grade IV as per IS - 229/2012 complete all as specified and directed. |
| 115 | Supply only Calcium hypochlorite granules(65 to 70%) complete all as specified and directed. |
| 116 | Supply and installation, testing, commissioning as in replacement of factory made, CPRI approved, outdoor type, LT Panel board, confirming to IS 5039 with IP-54 protection, made out of 3.15 mm thick CRCA sheet , 415 Volt, 3 phase , 50 Hz supply, mounted on PCC platfom and including MS angle section 50 x 50 x 5 mm frame with front and back openable, Double door with provision of locking arrangement dust & varmin proof , gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof, overall powder coated complete all as specifed and directed & consisting of the following equipments:-(i) MCCB, 4 Pole, 16 KA, 160 Amps,415 volts with extended terminals, fixed setting type (ii) Solid Alumiium bus bar bus bar 250 Amp for 3 phase, 125 Amps for neutral. (iii) Provn of fully automatic star delta starter with 40 amps FP power contactors ,No/Nc Aux contact , O/L relay & SD timer etc for 40HP submersible pumpset -01 Nos. (iv) Power Contactor Tripple Pole, 40 Amps 2 NO + 2 NC Aux contact type -01 Nos. (v) Electronic Overcurrent Relay with overcurrent, undercurrent, single phasing, phase unbalance, phase reveresal, ground fault and Locke rotor for 40 HP submersible pumpset - 01 Nos. (vi) SD timer for 50 HP submersible pumpset 01 Nos -02 Nos. (vii) Auto manual selector switch - 01 No. (viii) Multifunction meter Class, 1.0, Three line Bakelite LCD Display with back sealing arrangement , with meter run hour & power on Hour, AVG , Max & total value of Active , reactive & apparent power & span shot of power ( KW) , current (I) , Voltage (V) & PF with programmable CT Ratio of -/5A along with Suitable size core CTs for current sensing. (ix) Start/Stop push buttons - 01 Nos each. (x) Phase indication -RYB & Motor ON/ OFF/Trip indicating lamps LED type - 06 Nos. (xi) Control fuse with link- -03 Nos (xii) Timer for ON or OFF pump for desired time duration - 01 Nos. (xii) time for ON or OFF pump for desired time duration (xiii) changeover switch 3 pole, on load type, open execution, 63 Amps 01 Nos - 01 No.. (xvi) MCB SP 32 Amps C type - 04 Nos.(xvii) Control wiring shall be carried out with 2.5 sqmm copper conductor cable PVC insulated FRLSH. |
| 117 | Supply, install, testing and commissioning factory made (CPRI test certified) LT panel box (KIOSK) out door type platform mounted suitable for 415 volt , 3 phases, 4 wire , 50 Hz AC supply system all as specified and directed having busbar chamber with insulated AL bus bars installed on percelain insulators, the panel shall be dust and vermin proof double door made of 3.15 mm CRCA MS sheet outer & inner 3.15 mm thick and individual compartment for MCCB/MCB & volt/Amps meter and 50 x 50 x 5 mm thick angle iron for base frame work.The complete feeder pillar box should be powder coated including internal wiring with PVC insulated solid copper conductor FRLS cables appropriate size but not less than 2.5 Sqmm. Front and back opening type with approx size for cable entry,danger plate with double door shutter including locking arrangement (L drop Lock both side) as per manufacturers with 2 Lock and Keys. (a) Incoming- MCCB 4 pole 160 A , 415V,36 KA adjustable type with magnetic release - 01 No. (b) Digital Voltmeter size 96 x 96 mm, 0-600 volts with selector switch - 01 No. (c) Digital Ammeter size 96mm x 96 mm 0-400 Amps, CTs, CTR 0-400 Amps with selector switch - 01 No. (d) Busbar alluminium 250 A capacity Note: panel mounted on 45 cm height pcc platform above ground level and 0.35 below ground level (Rate to be inclusive in quoted ) |
| 118 | M& L for to rectify the leakage of CI/DI pipe of size 150 mm to 250 mm bore inclduing all required material to rectifiy the leakage in existing valve pits/Line including making good the disturbed surface of pits/Earth work required complete all as specified and directed. |
| 119 | M& L for to rectify the leakage of CI/DI pipe of size 80 to 100 mm bore inclduing all required material to rectifiy the leakage in existing valve pits/Line including making good the disturbed surface of pits/Earth work required complete all as specified and directed. |
| 120 | S&F in repair open well 2 HP single Phase submersible pump Max Discharge: up to 600 liters per hour. Max Head: from 30 to 60 meters, Power Requirements:2 HP, .Submersible Type: designed to operate underwater, eliminating the need for priming and reducing noise levels complete all as specified and directed. |
| 121 | Supply and Install Centrigugal pump Pumping sets, , electric driven, 5 HP KW,three phase,18 mtr head 600 LPM Discharge including PCC foundation and suitable angle iron work for & PCC foundation for fixing complete as specified and directed. |
| 122 | S&F in repair Lawn Sprinkler Connection Size ¾ inch Pop Up Height 2 inch Spray Pattern Full Circle Sprinkler Type Irrigation system Material Plastic Pressure10 Bar Automation Grade Automatic Body Type Pop up Type Size/Diameter 75 mm complete all as specified and directed. |
| 123 | S & F in renewal for gun metal, globe or gate valves size 80 mm bore , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 124 | Ditto as per Item No 122 above but globe or gate valves size 50 mm bore |
| 125 | Ditto as per Item No 122 above but globe or gate valves size 40 mm bore |
| 126 | Ditto as per Item No 122 above but globe or gate valves size 25 mm bore |
| 127 | Ditto as per Item No122 above but globe or gate valves size 20/15 mm bore |
| 128 | Material and labour for construction of valve pit chamber in stone masonry built in CM (1:6) of size 1200mm x 1200mm x1000mm (internal dimension) with precast cement concrete block of PCC 1:4:8 type D-2 using 40mm graded stone aggregate and 15mm thick rendering in CM 1:6 on internal and exposed external surfaces including 40 x 40 x6 mm mild steel angle iron frame and 3 mm thick MS sheet cover with locking arrangement and 1No. 50mm size 4 lever lock with triplicate keys including painting to steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide primer complete all as specified and directed. |
| 129 | Supply for set of five pieces chlorine tablets of Size 50.80mm in Diameter (packed in plastic sealed disposable packet with arrangement for appropriate water contact with the tablets and circulation through the plastic packet, suitable for operation through suitable feeder for disinfection of water pressurised line & including replacement indication: Visual & weight variation) complete all as specified and directed. |
| 130 | Taking up or down 20/25 mm bore CPVC pipes and connections including cleaning serviceable pipe internally/externally for stacking properly in safe custody and removing unserviceable pipe from site complete all as specified and directed.Note :-Excavation and earth work shall be measured and paid separately. |
| 131 | Supplying and laying of 40 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in trenches, floors complete all as specified and directed. |
| 132 | Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in trenches, floors complete all as specified and directed. |
| 133 | Ditto as per item no.131 but of size 20mm dia. |
| 134 | S&F in repair 25 LPH RO + post carbon water purifier With TDS adjuster,Heavy duty,ABS Plastic,25 Ltrs capacity,advanced TDS adjuster,enhance water safety with continuous,wall mounted(RO+ Post Carbon + TDS) including all connected items for fixing from sources complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender