Tender For Provision Of Oil And Greaser Store At Inas 311 Hangar ,Ins Dega Visakhapatnam (Lb - 179)
Tender Value
14.50 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
4 days left
EMD
29000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Oil And Greaser Store At Inas 311 Hangar ,Ins Dega Visakhapatnam (Lb - 179)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Surface clearance by cleaning away all shrubs, vegetation, grass, bushes, weed, trees and saplings not exc 30cm in girth, measured at a height of one meter above ground level. Useful material shall be stacked and rubbish / useless materials disposed off upto a distance of 50m outside periphery of the areas under clearance and burtnt or otherwise disposed off as directed. Roots of trees and saplings shall be removed by digging out roots upto 60cm below the ground level or 15cm below the formation level, whichever is lower. All holes and hollows, formed in the ground by digging out shall be carefully filled up with earth, well rammed and levelled. Boulders which may interfere with the work shall be removed, after breaking down if necessary. |
| 3 | Removing excavated soil to a distance not exc 50 mts and depositing where directed at a level not exc 1.5M above the starting point, in soils. |
| 4 | Earthwork in excavation in foundation trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 5 | Earthwork in excavation in foundation trenches n.exc 1.50m wide and exc 1.50m and nexc 3.00 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 6 | M&L for Cement concrete Plain cement concrete 1:4:8 type D2 as in foundations, filling and mass concrete and similar works complete all as specified and as directed. |
| 7 | Returning, filling in, including, spreading, leveling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed |
| 8 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and as directed. |
| 9 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed |
| 10 | M&L for M30 Desgn mix in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 11 | M&L for Cement concrete M30 design mix as in Beams, cantilevers, bressummers, lintels over 1.5m span similar works complete all as specified and as directed. |
| 12 | M&L for Cement concrete M30 design mix as in Columns, pillars, piers, posts and struts and similar works complete all as specified and as directed. |
| 13 | M&L for Cement concrete M30 design mix Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 14 | M&L for flat edges Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed |
| 15 | M&L for formwork to sides of RCC columns ,Pillars ,Posts,Struts, foundations , Piers finished in rough surfaces finishned rough complete all as specified and as directed |
| 16 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 17 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed. |
| 18 | M&L TMT bars 5 mm dia and over upto and incl 10mm, bent to shape required including cranking bending spirally for stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete. |
| 19 | M&L TMT bars 10 mm dia and over cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete. |
| 20 | Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 |
| 21 | M&L for brick work with flyash bricks straight or curved on plan to any radius in half brick thick walls old size bricks built in cement mortar 1:4 |
| 22 | Rendering 15 mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing in cement mortar 1:6 and finished even and smooth without using extra cement. |
| 23 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and with WPC @ 2% finished even and smooth without using extra cement. |
| 24 | Supply of Water proofing compound |
| 25 | S&F Powder coating anodised aluminium frame for doors, windows, ventilatiors with one or more rebtes including joining cleat for fixing etc. complete all as specified. (Minimum thickness of powder coating 50 micron). |
| 26 | S & F 4.8 mm thick tinted Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane for cup board, cabinet, racks etc. |
| 27 | Supply only Powder Coated Aluminium Deco Grill of Model / Design No. DG 104 (7.2mmx4.2mm) including Powder Coated Aluminium Channel of size 15 X 10 X 1.5mm for fixing Deco Grill complete all as specified and as directed. |
| 28 | S&F 150mm long anodised aluminium handles, cast type complete all as specified and as directed. |
| 29 | S&F 100 mm size mild steel hinges medium weight complete all as specified and directed |
| 30 | S&F for 150 mm long mild steel barrel tower bolt of extruded section complete all as specified . |
| 31 | Preparation of New or previously untreated surfaces of cement or plastered surfaces, of any description and girth, not otherwise described and applying 1mm thick wall care putty and primer on wall surface to achieve even and smooth surface and applying two coats of oil bound distemper on walls. |
| 32 | Material & Labour for applying wall care putty of 1mm thick over plastered surface to prepare the surface even and smooth and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 33 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 |
| 34 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 20 mm graded stone aggregate . |
| 35 | M & L for 100mm thick, PCC 1:2:4, type B-2, using 40mm graded stone aggregate . |
| 36 | Demolition of concrete in ground floors and pavings nexc 15cm thickness(below or above ground level) complete all as specified and as direcetd. |
| 37 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil |
| 38 | Excavating over areas nexc 1.50 m deep and getting out complete all as specified and as directed. |
| 39 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point. |
| 40 | M&L for PCC (1:3:6) type C-2 using 40mm graded machine crushed stone aggregate as in foundation. |
| 41 | M&L hard core of broken stone or boulders of guage not exc 63mm but n exc 40mm deposited spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete. |
| 42 | M&L for 100 mm thick cement concrete type B-1, 1:2:4 (20 mm graged aggregate) complete all as specified and as directed. |
| 43 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed. |
| 44 | M&L preparation of new plastered surface and applying three coats of white wash complete all as specified and as directed |
| 45 | SCHEDULE 'A' PART-II: E/M WORKS |
| 46 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete all as specified and directed. |
| 47 | Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for laying of cable complete all as specified. |
| 48 | Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified |
| 49 | Removing excavated surplus soils meterial not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified. |
| 50 | Material and labour for natural river sand as cushioning of cables, including spreading and punning down complete all as specified and directed by Engineer in charge. Note : punned thickness shall be measured for payment purpose |
| 51 | Supply and laying in trenches bricks common burnt clay building brick , sub class B designation 75 complete all as specified & directed |
| 52 | Supply and laying GI tubing lingh grade 40mm in trenches complete all as specified & directed by Engr in charge |
| 53 | Material and labour for point wiring with 1.5 Sqmm PVC insulated and unsheathed copper cable 1100V, FRLS grade multistranded drawn in and including suitable dia surface stove enamel steel conduit on walls/concealed with tee, bend, elbows,junction box etc. with provision of PVC insulated 1.5 sqmm copper conductor cable as earth continuity suitable for flame proof switches, sockets regulator and connected the earth wire to common earth dolly for One light point/fan point controlled by one switch complete all as specified and as directed. |
| 54 | Supply and fix Flame proof weather proof LED 16W light fittings all as specified and directed. |
| 55 | S & F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed. |
| 56 | Supply & fix Flameproof Exhaust Fan, Heavy duty, Metallic type 230 volts single phase oscillating 450 mm sweep including cutting holes for provision of Exhaust Fan along with wire mesh / Louvers complete all as specified and directed by Engg-in-Charge. |
| 57 | S & F Building Security light LED type of minimum 35 W Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted complete all as specified and as directed by the Engineer-in-Charge. |
| 58 | Supply and fixing flame WP 6Way MCB DB in Cast aluminum alloy LM-6 construction IP 66 degree of protection, epoxy gray paint with internal and external earthing SS hardware inclusive of MCB's consists of SPN incomming 40A and 4 Nos outgoing 6 to 32 A approved by CIMFR complete all as specified and directed by Engr in Charge |
| 59 | M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with GI earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber,CI frame with CI 10mm thick cover, 20mm dia GI medium grade pipe for watering , and water funnel with wirw mesh, 20mm dia light grade GI pipe for protection of strip complete all as specified and testing on completion. |
| 60 | Supplying, installing testing and commissioning of Analogue Addressable type Single Loop Fire Alarm Control Panel with 99 detectors & 99 Modules & up to 200 Detectors and Modules per each loop, expandable Up to 1000 fire detection zones, with UL/ULC/ LPCB/ FM listed and complying with BS EN 54 Parts 2 and 4 along with Network interface Card and Lead Acid Battery backup for 08 Hours normal operation and 15 minutes alarm operation, the control panel, battery charger including provision of protective cover as and where required and taking down existing old panel of any description and type complete all as specified and as directed and consistiong of lthe following features:- |
| 61 | [a] True peer-to-peer networking [b] Shall support intelligent/ programmable remote terminals,[c] BMS interface, which cosists of backlit display menu driven graphical screen,[d] IP Gateway and I/O Drivers Autolearn and Loop detection 1000 event log entries, [e] Simplified logic delivers click and go configuration,[f] Quick start and protect - A working system after an auto learn is performed[g] Optional Peripheral expansion card Up to 126-254 devices per loop (Protocol dependent), Up to 188,800 devices per network, Networkable up to 200 nodes[h] Circuit monitoring of local panel circuits[j] Simple Select & Click programming,[k] Single area false alarm management,[l] Single area false alarm management facility,[m] CMS/ Ad-Net Software - to monitor & control the status of the FACP from the windows based system - with Visual & Sound alerts for the fire and fault coditions - with Three Level multi users access. |
| 62 | Note: The rate quoted shall also deemed to include for the following provisions also:- [i] Supply and installation of Batteries 12v 18/07 Ah - 02 Nos[ii] Supply and installation of 24 volt Fault Torrent Network card/ OLYNET/ ONERING with bulit in diagnostics and is fully monitored for both short and open circuit faults between nodes installed in fire alarm panel with maximum 200 Network nodes.[iii] Fire detection and alarm system connected with Compatible GSM/PSTN auto dialer alongwith activated Sim for easy communication with pre recorded messages to stored phone numbers - 1 SetMake: Compatible with Honeywell, Notifier, Apollo Discovery, Argus Vega, Hochiki ESP and Nittan Evolution protocols |
| 63 | Supply, Installation, commissioning and testing of GSM communicator which converts the Contact ID codes of the fire alarm panel's PSTN communicator For Central alarm monitoring: GSM Communicator is special for converting the PSTN Adecco Contact ID codes to readable SMS notifications and SIA - 09 IP over GPRS network to central monitoring station (CMS). Available in 2G/3G/4G/LTE mobile network versions including five years SIM recharge for networking/communication. Fire detection and alarm system are to be connected with GSM Module with 2/4G GSM version of 2G QUAD BAND (850/900/1800/1900 MHz). Direct mount Antenna with SMA Male L-Type Connector-CDMA and WCDMA, 2.5 dBi Gain and 850-2100/2400 MHz. IP communicator for fire alarm control panels, Supports full transmission Contact ID over IP SIA-DC09 event information to security monitoring station. 4/8 general alarm inputs including power supply voltage monitoring via SMS message, 800 remote control users via free short call, 800 users control by GSM call or using maxim- Dallas I Button keys, Configuration using standard mini-USB cable.Remote configuration and firmware upgrade, Easy installation. Testing and diagnostic of the module via USB by using program SOFTWARE. Very useful features are troubleshooting and testing of the module via USB PC; this saves time for installer and allow real time monitoring of module parameters, input/output and GSM modem status (IMEI,SIM,registration) etc. Supports up to 32 temperature sensors or 1 humidity/temperature sensor for automation purposes such as HVAC temperature control, alarm and control - Optional with extra sensor. Please Enable Macros to View BoQ information |
| 64 | Supply, Installation, commissioning and testing of GSM communicator which converts the Contact ID codes of the fire alarm panel's PSTN communicator For Central alarm monitoring: GSM Communicator is special for converting the PSTN Adecco Contact ID codes to readable SMS notifications and SIA - 09 IP over GPRS network to central monitoring station (CMS). Available in 2G/3G/4G/LTE mobile network versions including five years SIM recharge for networking/communication. Fire detection and alarm system are to be connected with GSM Module with 2/4G GSM version of 2G QUAD BAND (850/900/1800/1900 MHz). Direct mount Antenna with SMA Male L-Type Connector-CDMA and WCDMA, 2.5 dBi Gain and 850-2100/2400 MHz. IP communicator for fire alarm control panels, Supports full transmission Contact ID over IP SIA-DC09 event information to security monitoring station. 4/8 general alarm inputs including power supply voltage monitoring via SMS message, 800 remote control users via free short call, 800 users control by GSM call or using maxim- Dallas I Button keys, Configuration using standard mini-USB cable.Remote configuration and firmware upgrade, Easy installation. Testing and diagnostic of the module via USB by using program SOFTWARE. Very useful features are troubleshooting and testing of the module via USB PC; this saves time for installer and allow real time monitoring of module parameters, input/output and GSM modem status (IMEI,SIM,registration) etc. Supports up to 32 temperature sensors or 1 humidity/temperature sensor for automation purposes such as HVAC temperature control, alarm and control - Optional with extra sensor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender