Defence Statutory Bodies & Commissions/Committees Closing in 17 days TDR #57122260

Tender For Name Of Work : special Repairs To Bldg No T-02 Of Aps Devlali & Other Senctioned Works Under The Aor Of Ge Deolali.

Issued by Statutory Bodies & Commissions/Committees · Nashik, Maharashtra
Tender Value
43 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
17 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Name Of Work : special Repairs To Bldg No T-02 Of Aps Devlali & Other Senctioned Works Under The Aor Of Ge Deolali.

BOQ

Name of Work:- NAME OF WORK : SPL REPAIRS TO BLDG NO T-02 OF APS DEVLALI & OTHER SENCTIONED WORKS UNDER THE AOR OF GE DEOLALI.
Sl. No. Item Description
1Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose type of soil complete all as specified and directed.
2Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft disintegrated rock type of soil complete all as specified and directed.
3M &L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaceall as specified and directed.
4Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed
5Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation, etc., and getting out in any type of soil complete all as specified and directed.
6M&L for Cement concrete in foundations, filling and mass concrete Type D2 1:4:8 using 40mm graded agg complete all as specified and directed.
7Demolition of brickwork of stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed.
8Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.
9S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
10S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
11Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as directed.
12S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed
13S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 11 to 15 mm complete all as specified and directed
14Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil complete all as specified and directed.
15S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in cladding to wall, fixed with self tapping screws as specified.
16S&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes built in CM 1:6 complete all as specified and directed.
17S&F for 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
18M&L PAINTING STEEL AND IRON Surfaces prepration and Priming with red oxide, zinc chrome with Two coat of synthetic enamel (Ordinary tint) of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed.
19M&L Rendering 10mm thick with1:6 cement mortar on fair faces of brick work or concrete surfaces complete all as specified and directed.
20Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.
21M&L for rendering 15mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, even smooth and finished surface complete all as specified and as directed.
22Demolition wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets all as specified and directed.
23S&F for powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Main Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 2mm fixed to wall perimetrs at 450mm centres and shall conform to IS 733, IS 1285 with and including hangers of 3mm dia. G.I. (upto 1200mm length and 1200mm centres) adjusting level fixed to roof steel members by means of ceilling cleats made out of G.I. flat 40X3 mm size 60mm long etc complete all as specified and directed .
24M&L for 4mm thick non asbestos fibre cement building boards of make 'E Board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed .
25M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius Modular bricks in 1:6 cement mortar complete all as specified and directed
26M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:6) complete all as specified and directed. Please Enable Macros to View BoQ information
27M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:6) complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57122260
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 43 Lakhs
LAST DATE 10-09-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Name Of Work : special Repairs To Bldg No T-02 Of Aps Devlali & Other Senctioned Works Under The Aor Of Ge Deolali.
Basic Detail
Tender No 8254/E8
Bidding Type Tender
Location
City Nashik
State Maharashtra
Key Dates
Publish Date 20 Aug 2026
Submission Date 10 Sep 2026
Open Date 15 Sep 2026
Finance
Tender Value 43 Lakhs
Tender Fee 500
EMD 86000
Exemption Available
Document List
BOQ_880192.xls
e08ad057-a740-4671-8e69-34e99277cf06.html
gnlpgs.pdf
ps.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 10, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Sep 15, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_880192.xls

html

e08ad057-a740-4671-8e69-34e99277cf06.html

pdf

gnlpgs.pdf

pdf

ps.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders