Tender For Special Repair To Single Living Accn And Dining Hall/Cook House Of Half Dsc Pl At Bathu Basti Af Stn And special Rep/Replacement Of Street Light And Connected Items At Prothrapur Area Under Ge Brichgunj, Sri Vijaya Puram
Tender Value
34.24 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
23 days left
EMD
69000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Single Living Accn And Dining Hall/Cook House Of Half Dsc Pl At Bathu Basti Af Stn And special Rep/Replacement Of Street Light And Connected Items At Prothrapur Area Under Ge Brichgunj, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings in roof covering complete all as specified and as directed. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based (corrugated/semi corrugated) sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 4 | S&F Plain, Aluminium sheeting 0.56mm thick, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed. |
| 5 | Dismantling wrought iron (or) mild steel work of any description not other wise provided for complete all as specified and as directed. |
| 6 | S & F MS Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed. |
| 7 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E 251 Quality B complete all as specified and as directed. |
| 8 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 9 | M&L Preparation of new steel / iron surfaces of exc. 10cm wide or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed. |
| 10 | M&L for preperation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 11 | Taking down chowkat with shutter without taking off shutters from the frame n.exc 1.5 Sqm complete all as specified and as directed. |
| 12 | Taking down chowkat with shutter without taking off shutters from the frame exc 1.5 Sqm but n exc 4 sqm complete all as specified and as directed. |
| 13 | S & F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 14 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 15 | M&L for Aluminium grill powder coated transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge |
| 16 | S&F Aluminium composite panel (ACP) sheet of 4 mm thick as in wall cladding & false ceiling,Chajja including aluminium frame work of size 50x25x1.5mm with plastic strips ( double sided sticker) of suitable size of varying thickness of 10mm to 30 mm , applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant, The board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive complete all as specified and as directed. |
| 17 | S&F Aluminium (extruded section ) door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 18 | S & F Aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) 300mm long and fixing clips of sheet, cast or extruded section and fixing bolt of cast aluminium alloy, complete all as specified and as directed. |
| 19 | S & F Aluminium, anodised, barrel tower bolt of extruded section, 150 mm long, complete all as specified and as directed. |
| 20 | S & F 150 mm long extruded, aluminium alloy anodised handle, fabricated type, complete all as specified and as directed. |
| 21 | S&F Butt hinges of size 100 mm medium weight cold rolled mild steel complete all as specified and as directed. |
| 22 | S&F Aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed. |
| 23 | S&F Sheet glass 4.0mm thick ordinary quality and glazing with oil putty in Square n.exc 0.5 sqm in each pane complete all as specified and as directed. |
| 24 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed. |
| 25 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specified complete all as specified and as directed. |
| 26 | M&L for Plain cement concrete 1:2:4, 25mm thick, type B1, (using 20mm graded stone aggregate) as in levelling course complete all as specified and as directed. |
| 27 | M&L for Plain cement concrete 1:3:6, 75 mm thick, type C1 (using 20mm graded stone aggregate) as in Plinth Protection complete all as specified and as directed. |
| 28 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in Cement mortar 1:4 for laying floor finishes complete all as specified and as directed. |
| 29 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 10 mm thick in Cement mortor 1:4 for laying floor finishes complete all as specified and as directed. |
| 30 | M & L for Coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick, set and jointed neat cement slurry and pointed with With mixture of white & grey cement in equal proportions & no pigment, over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 etc. complete all as specified and as directed. |
| 31 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets Including frame of any description and any thickness, fixed in any position complete all as specified and as directed. |
| 32 | M&L for False ceiling with aluminum grid work (Size of grid 605x605mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with 2mm dia GI wire hooked to roof with needful adjustment bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 4 mm thick complete all as specified and as directed. |
| 33 | Demolition of PCC Block walling built in cement mortar complete all as specified and as directed |
| 34 | M&L for Precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 all as specified and as directed. |
| 35 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed. |
| 36 | M & L for Complete removal of existing treatment on surfaces of walls and applying two or more coats distempering with 1st quality distemper (ready/mixed) having VOC content less than 50 gms/ltr, of approved manufacturer, of required shade & colour complete as per manufacturer's instructions complete all as specified and as directed. |
| 37 | M & L for Complete removal of existing treatment on surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. |
| 38 | Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and as directed. |
| 39 | M&L for Point wiring with 1.5 Sqmm FRLS multi strand PVC insulated and unsheathed copper conductor cable concealed in and including PVC conduit of 20 mm dia. ISI marked complete with 1.60mm thick pressed steel concealed galvanised terminal boxes and with top cover 3.0 mm thick ISI marked plastic laminated hylum sheet of reqd colour fixed with brass screws and cup washers, complete with all accessories and all as specified including 1.5 Sqmm (FRLS) PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for One light /exhaust fan point controlled by one switch complete all as specified and as directed. |
| 40 | All as per Item Ser No.41.00 here in before but One fan point controlled by one switch and one regulator complete all as specified and as directed. |
| 41 | All as per Item Ser No.41.00 here in before but One 5 pin 5 Amp switch socket out let point on an same board complete all as specified and as directed. |
| 42 | All as per Item Ser No.41.00 here in before but One 5 pin 5 Amp switch socket out let point on an independent board complete all as specified and as directed. |
| 43 | All as per Item Ser No.41.00 here in before but One lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed |
| 44 | All as per Item Ser No.41.00 here in before but with copper conductor cable for one 3 pin socket outlet, 15A independent, with cable 4 Sqmm and 4 Sqmm earth continuty conductor, complete all as specified and as directed by Engineer-in-Charge. |
| 45 | S&F Switch piano flush type 5 Amp single pole one way complete all as specified and as directed. |
| 46 | S&F Switch socket outlet 3 & 2 pin 5 amps flush/box type, complete all as specified and as dircted. |
| 47 | S&F Switch socket outlet, 2 in 1, 3 pin 15 and 5 amps, controlled by one switch flush/box type complete all as specified and as directed. |
| 48 | S&F Ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed. |
| 49 | S&F Fan speed regulator, electronic suitable for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed. |
| 50 | Taking down old unserviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 2.5 mfd - 01 No., PVC canopy - 02 No's and bearing including scrapping of old paint and applying two coats of synthetic enamel white paint over a coat of red oxide primer complete and refixing back at site complete all as specified and as directed. |
| 51 | S&F Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and as directed. |
| 52 | S&F Energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose complete all as specified and as directed. |
| 53 | S&F Star surface mounted LED 12 w Round/Surface type with in die cast aluminium housing finished in premimum white powder coating prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, including taking down old unserviceable fitting of any wattage, complete all as specified and as directed. |
| 54 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 55 | S&F New genration energy saving 36W & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete all as specified and as directed. |
| 56 | S&F LED lamp 9 Watt, 230 Volt complete all as specified and as directed. |
| 57 | S&F Metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs complete all as as specified and as directed. |
| 58 | S&F MCB SPN 32 Amp 240 volt complete all as specified and as directed. |
| 59 | S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and as directed. |
| 60 | M&L for Sub main wiring with two single core 4.0 Sqmm (FRLS) copper conductor PVC unsheathed cable 1100 volts grade, multistranded with copper conductor including PVC conduit (appropriate size) drawn through incl PVC Conduit / concealed and all accessories fixed to wall for sub main connection including 2.5 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and as directed. ( Note :- Two runs of 4.0 sqmm (FRLS) and one run of 2.5 sqmm (FRLS) copper conductor and PVC Conduit shall be measured as one unit length.) |
| 61 | Supply,laying,jointing,connecting,testing underground XLPE insulated,PVC seathed, armoured heavy duty electric LT cable,1100 volts grade with aluminium stranded conductor,10 sqmm 4 core,laid in trenches/fixed to poles/drawn through pipes with suitable size cable glands,crimping type cable lugs,sockets etc.complete and taking down the existing cable all as specified and directed. |
| 62 | Supply & laying cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38 mm confirming to IS 14930 -II and ISI Marked all specified and directed. |
| 63 | M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC 1:3:6, type C1, pre cast RCC 1:2:4, type B1, cover slab 54cm x 54cm x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR Part - I |
| 64 | Supply,laying,jointing,connecting,testing underground XLPE insulated,PVC seathed, armoured heavy duty electric LT cable,1100 volts grade with aluminium stranded conductor,10 sqmm 4core,laid in trenches/fixed to poles/drawn through pipes with suitable size cable glands,crimping type cable lugs,sockets etc.complete and taking down the existing cable all as specified and directed. |
| 65 | S&F in Repair of LED street light fitting 70/72 watts,not less than 120Im/watt with pressure die-cost aluminium housing along with prismatic polycarbonate modular secondary lens optics for street light application with IP66 ingress protection and impact resistance of IK08/IK074KV inbuilt surge and 10KV external surge protection with Top/Bottom opening driver cover for easy maintenance and soft illumination effect and powder costed complete on fixing on GI Octogonal Pole of 6/7 mtrs height complete all as specified and as directed. Make: Crompton cat No CRP-406=70-57-HL2-GL-NSG and Make: Havells Cat No ENDURASUNDOWNSL-70WLED 765PASYBOTG and Make: Bajaj cat No ZELA P 86LWH PO TG SD 72 Watt or equivalent of other makes as specified in PS. |
| 66 | M&L for Cutting Bittumen Road Hard top at site as required for Laying of cables and making good of disturbed surface as per existing top with 20/40mm graded stone aggregate and bitumen layer etc after repair work complete all as specified and as directed. |
| 67 | Supply, Laying, GI tubing light grade for encasing LT cables for mechanical protection, laid in trench /floor/under road or along the pole by means of M.S.F.I. clamps with necessary bolts nuts and washers etc of size 40 mm dia, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 68 | Supply, Laying, GI tubing light grade for encasing LT cables for mechanical protection, laid in trench /floor/under road or along the pole by means of M.S.F.I. clamps with necessary bolts nuts and washers etc of size 40 mm dia, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender