Tender For Repair To Wall Panelling, Cupboards, Joinery And Wooden Work At Dgre Rdc Manali Under Age (I)R&D Manali.
Tender Value
10 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
12 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kullu → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Wall Panelling, Cupboards, Joinery And Wooden Work At Dgre Rdc Manali Under Age (I)R&D Manali.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area not exc 1.5 Sqm each all as specified. |
| 2 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each all as specified. |
| 3 | Taking down shutter of any description but n.exc 1 sqm each complete all as specified. |
| 4 | Taking down shutter of any description but exc 1 sqm and n exc 2 sqm each complete all as specified. |
| 5 | M&L for IInd class hard wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length complete all as specified. |
| 6 | M&L for 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete all as specified. |
| 7 | M&L for 125x60 pressedsteel frames for doors, windows and ventilators of mild steel Tee-se, joints mitred and welded, including fixing of necessary butt hinges and screws and fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 graded stone aggregate 20 mm nominal size) complete all as specified |
| 8 | S&F 30 mm thick flush shutters , solid core construction with block board core and plywood face panels commercial type both side with lipping/frame to match complete all as specified and as directed. |
| 9 | S&F for 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed by Engr-in-charge |
| 10 | S&F for 2nd class hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed by Engr-in-charge |
| 11 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification. |
| 12 | Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification |
| 13 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete as specified and as directed. |
| 14 | S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete as specified and as directed. |
| 15 | S&F for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed |
| 16 | S&F in repairs for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed |
| 17 | S&F stainless steel Butt hinges 100 mm size and fixed complete as specified and as directed. |
| 18 | S&F stainless steel handles of size 125 mm, fabricated type anodised complete all as specified and as directed. |
| 19 | S&F stainless steel handles of size 75 mm, fabricated type anodised complete all as specified and as directed. |
| 20 | S&F for stainless steel barrel tower bolts 200 mm length of bolt of extruded section and fixed complete all as specified and as directed. |
| 21 | S&F for stainless steel barrel tower bolts 100 mm length of bolt of extruded section and fixed complete all as specified and as directed. |
| 22 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250 mm long of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 23 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one pink primer complete all as specified. |
| 24 | S&F in repairs for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified. |
| 25 | S&F in repairs for mild steel mortice lock, 4 levers vertical type, size100 mm complete all as specified and as directed. |
| 26 | S&F in repairs for Hat pegs, solid body,125mm to 175 mm complete all as specified and as directed. |
| 27 | S&F in repairs for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified |
| 28 | S&F in repairs for Hasp and staple, 75mm mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 29 | S&F in repairs for Door closer hydraulically regulated,cost iron body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 30 | S&F in repairs for aluminium hanging floor door stopper,single rubber stopper ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and as directed. |
| 31 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead and thickness above 10 mm up to 25 mm complete all as specified. |
| 32 | S & F of 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board,anti fungal,moisture resistence,anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc.flat pressed hdhmr boards 15380: 2003 marked, having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by AGE(I) . Make:-Action tessa/Greenply/ Century |
| 33 | Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and as directed. |
| 34 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) complete all as specified. |
| 35 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not lessthan 10kg/sqm) complete all as specified. |
| 36 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, and min wt 3kg/sqm with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, allcomplete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment) complete all as specified. |
| 37 | Repair to aluminium door/window including taking down, replacement of unserviceable hinging device, handles, making them in serviceable condition and re-fixing in same opening, complete all as specified and directed by Engr-in-charge. |
| 38 | M&L for resecuring or easing the Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with out taking down the frame from opening, complete all as specified and directed by Engr-in-charge. |
| 39 | M&L for resecuring or easing the shutter n exc 1 sq. m each with out taking down the shutter from frame complete all as specified and directed by Engr-in-charge. |
| 40 | M&L for resecuring or easing the shutter exc 1 sq. m but n exc 2 sq. m each with out taking down the shutter from frame complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender