Tender For Repairs And Restoration Of Furniture Items Of Hosptial, Officer Mess, Its Single Living Officer And Single Sailor Du, Training Esttbs, Unit Schools Etc. Under Ge(Nb) Visakhapatnam
Tender Value
45 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
14 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Restoration Of Furniture Items Of Hosptial, Officer Mess, Its Single Living Officer And Single Sailor Du, Training Esttbs, Unit Schools Etc. Under Ge(Nb) Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and taking out carefully old Unserviceable/Worn Out/broken components of Wooden/Steel Furniture without damaging the remaining serviceable members, furniture and Supplying and Fixing of the same with new components such as Prelaminated MDF Board, Exterior Grade, One side decorative lamination and other side balancing white conforming to IS – 14857, Plywood BWR Grade conforming to IS – 303, Decorative laminate sheets, Edge Banding & Finishing, Mild Steel Sections, Iron mongery fittings, Glass fixing/fittings, Builders Hardware, Tapestry Cloth, Foam, Upholstery & Diamond Button-Tufting , Plastic Cane, Cotton/Nylon Newar etc.and Wood Work made of 1st Class Hard Wood (Teak Wood), seasoned, free from knots and cracks, wrought finished including tightening the joints, pinning, screwing, nailing, wedging, applying putty, gluing, providing hinges,handles/knobs, polishing/painting the entire article with standard workmanship complete to its original shape and size all as shown on drawings,as specified,as brief description of items and as directed by Engr-in-Charge. All furniture items shall be painted/polished only after completing all repairs and renewals work etc, preparation of steel/iron/wooden surface by removing of old paint/polish by using grinding machine, taking out dents & filling metal putty/wood filler to the uneven surfaces, after thoroughly preparation the surfaces of the furniture articles, then apply spray painting/polishing with two coat of synthetic enamel paint/ melamine polish. The furniture shall be repaired/ renewed, Painted/Polished on site . Work will be executed inside the Barrack Store Yard of GE(NB) Vizag and at various sites as per requirement as directed by Engr-in-Charge without fail. All materials to be incorporated in the work shall conform to the latest IS Specification. Anti-termite and anti-bug treatment shall be done before polishing the wooden furniture. Rate quoted is deemed to be including the same. |
| 2 | STOOL STEEL (305X305X510MM) : FD-81 |
| 3 | M & L for repair to STOOL STEEL (305X305X510MM) by taking down/removing the existing broken /unserviceable Leg by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Leg 510mm height made of 1.25mm thick MS sheet made to shape and size as per the exisiting by welding to the exact place and position, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 4 | M & L for repair to STOOL STEEL (305X305X510MM) by taking down/removing the existing broken /unserviceable Top by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Top made of 1.25mm thick MS sheet made to shape and of size 305x315mm as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc including one coat of synthetic enamel (1st quality) over a coat of red oxide zinc chrome primer, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 5 | M&L for painting to STOOL STEEL (305X305X510MM) by two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the STOOL STEEL, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 6 | STOOL WITH CUSHION TOP : FD-354/FD-103(M) |
| 7 | M & L for repair to STOOL WITH CUSHION TOP by taking down/removing the existing broken /unserviceable Clip by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new clip made of 1.6mm thick MS sheet made to L-shape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 8 | M & L for repair to STOOL WITH CUSHION TOP by taking down/removing the existing broken /unserviceable Padded Seat of 380 mm dia carefully without disturbing the adjoining part and supply and fixing new Padded seat with rexine cover in olive green colour as per the exisiting size and shape, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 9 | M&L for painting to STOOL WITH CUSHION TOP by two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the STOOL WITH CUSHION TOP, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 10 | STEP STEEL 2 TIER : FD-131 (M) |
| 11 | M & L for repair to STEP STEEL 2 TIER by taking down/removing the existing broken /unserviceable Leg by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Leg made out of 25mm dia MS tube, 1mm thick made to shape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 12 | S & F of Castor wheel 50mm dia with ball bearing duly fixed with rubber over the same as per the exisiting and fixed to exact place and position to Step Steel 2 Tier in replacement, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 13 | M & L for repair to STEP STEEL 2 TIER by taking down/removing the existing broken /unserviceable Top by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Top made of 1.25mm thick MS sheet made to shape and of size 230x230mm as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 14 | M&L for painting to STEP STEEL 2 TIER by two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the STEP STEEL 2 TIER, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 15 | RACK TOWEL STEEL : FD-81 |
| 16 | M & L for repair to RACK TOWEL STEEL by taking down/removing the existing broken /unserviceable Leg by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Leg made of 175mm height, 25mm dia MS tube of 1.6mm thick made toshape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 17 | M&L for painting to RACK TOWEL STEEL by two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using three-stage chemical pre-treatment to ensure absolute adhesion of the coating and prevent sub-film corrosion, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the RACK TOWEL STEEL, then apply spray painting with two coat of synthetic enamel paint (Ivory white) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 18 | SCREEN MOVEABLE STEEL : FD-83 & TP |
| 19 | M & L for repair to SCREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Leg by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Leg made of 300mm height, 25mm dia MS tube of 1.6mm thick made to shape and size as per the exisiting by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 20 | M & L for repair to SCREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable hinge by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new stainless steel Hinge, 100mm size fixed to the exact place and position, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 21 | M & L for repair to SCREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Hook and Spring carefully without disturbing the adjoining part and supply and fixing new Hook and Spring, PVC coated, 1150mm long all as per the exisiting specification and fixed, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 22 | M & L for repair to SREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Hook and Spring carefully without disturbing the adjoining part and supply and fixing new Hook and Spring, PVC coated, 550mm long all as per the exisiting specification and fixed, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 23 | M & L for repair to SCREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Cotton fabric curtain carefully without disturbing the adjoining part and supply and fixing new Cotton fabric curtain of size 1160x1200mm duly stitch of green colour of Rate not less than Rs. 250.00 per metre all as per the exisiting specification and fixed, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 24 | M & L for repair to SCREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Cotton fabric curtain carefully without disturbing the adjoining part and supply and fixing new Cotton fabric curtain of size 550x1200mm duly stitch of green colour of Rate not less than Rs. 250.00 per metre all as per the exisiting specification and fixed, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 25 | M & L for repair to SREEN MOVABLE STEEL by taking down/removing the existing broken /unserviceable Castor Wheel carefully without disturbing the adjoining part and supply and fixing new 50 mm diameter, feature a 360-degree swivel mechanism with double ball bearings for smooth maneuvering, and provide a minimum load capacity of 40 kg per wheel. To ensure workplace safety, at least two wheels per screen unit must include an integrated total-lock brake system. All as per the exisiting specification and fixed, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 26 | M&L for painting to SCREEN MOVABLE STEEL by two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the SCREEN MOVABLE STEEL, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 27 | TABLE BEDSIDE (TP) : TP-GODREJ |
| 28 | S&F of top drawer SS channel 12\\" long in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 29 | S&F of SS Knob of 25 mm dia and removal of old PVC knob in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 30 | S & F of 4 lever SS lock with key in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 31 | M & L for repair to TABLE BED SIDE SS TOP by taking down/removing the existing broken /unserviceable PPCP Top carefully without disturbing the adjoining part and supply and fixing new Top of size 460X400 mm made of Stainless steel Grade I thickness 1.5mm thick to existing frames underneath and cut the corners to insert the existing legs, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 32 | M & L for repair to TABLE BED SIDE SS TOP by taking down/removing the existing broken /unserviceable PPCP bottom chamber top sheet of size 460X400 mm carefully without disturbing the adjoining part and refix with new top sheet of Stainless steel Grade I thickness 1.5mm thick to existing frames underneath and cut the corners to insert the existing legs, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 33 | M&L for painting to TABLE BED SIDE STEEL: TP-GODREJ by two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using three-stage chemical pre-treatment to ensure absolute adhesion of the coating and prevent sub-film corrosion, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the TABLE BED SIDE STEEL: TP-GODREJ, then apply spray painting with two coat of synthetic enamel paint (Ivory white) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 34 | TABLE BED SIDE STEEL: FD-157(M) (600 mm W x 380mm D x 700m H) / HFD-2005 (400 mm × 400 mm × 810 mm) |
| 35 | M & L for Repairs to TABLE BED SIDE STEEL: FD-157(M) by taking down the existing broken /unserviceable Top carefully without disturbing the adjoining parts and replacing the same in position with new Top of size 660mmX380mm made of Stainless steel Grade-I 1.5mm thick to existing frames underneath and cut the corners to insert the existing legs, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 36 | M & L for Repairs to TABLE BED SIDE STEEL: HFD-2005 by taking down the existing broken /unserviceable Top carefully without disturbing the adjoining parts and replacing the same in position with new Top of size 400mmX400mm made of Stainless steel Grade-I 1.5mm thick with 20 mm raised edges on 3 sides to existing frames underneath and cut the corners to insert the existing legs, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 37 | M & L for repair to TABLE BED SIDE STEEL: FD-157(M) by taking down/removing the existing broken /unserviceable Leg by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Leg made of MS tubuler pipe of size 25mm diameter of wall thickness 1.6mm made to shape 130mm high by welding to the exact place and position and make the welded portion smooth by grinding etc and fitted with 1\\" rubber shoe, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 38 | M & L for repair to TABLE BED SIDE STEEL: HFD-2005 by taking down/removing the existing broken /unserviceable Leg by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Leg of size 25mm diameter made of Mild Steel Tubular Premium, 18 SWG thickness, cut to match existing height as required by welding to the exact place and position and make the welded portion smooth by grinding etc and fitted with 1\\" rubber shoe, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 39 | M & L for repair to TABLE BED SIDE STEEL: HFD-2005 by taking down/removing the existing broken /unserviceable Door Shutter by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Door Shutter as per the existing size and shape made out of 1.25mm thick Mild steel (18 SWG CRCA) sheet fitted with ventilation louvers, Brass knob with blank mechanism and a self-locking latch to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 40 | M & L for repair to TABLE BED SIDE STEEL: HFD-2005 by taking down/removing the existing broken /unserviceable Side of Cabinet box by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Side of Cabinet box as per the existing size and shape made out of 1.25mm thick Mild steel (18 SWG CRCA) sheet to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 41 | M & L for repair to TABLE BED SIDE STEEL: FD-157(M) by taking down/removing the existing broken /unserviceable Door Shutter by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Door Shutter as per the existing size and shape made out of 1.25mm thick Mild steel sheet fitted with ventilation louvers, Brass knob with blank mechanism and a self-locking latch to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 42 | M & L for repair to TABLE BED SIDE STEEL: FD-157(M) by taking down/removing the existing broken /unserviceable Side of Cabinet box by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Side of Cabinet box as per the existing size and shape made out of 1.25mm thick Mild steel sheet to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 43 | M & L for repair to TABLE BED SIDE STEEL: FD-157(M) by taking down/removing the existing broken /unserviceable Middle/Bottom Shelf by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing Middle/Bottom as per the existing size and shape made out of 1mm thick Mild steel sheet to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 44 | M&L for painting to TABLE BED SIDE STEEL: FD-157(M) by two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using three-stage chemical pre-treatment to ensure absolute adhesion of the coating and prevent sub-film corrosion, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the TABLE BED SIDE STEEL: FD-157(M), then apply spray painting with two coat of synthetic enamel paint (Ivory white) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 45 | M&L for painting to TABLE BED SIDE STEEL: HFD-2005 by two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using three-stage chemical pre-treatment to ensure absolute adhesion of the coating and prevent sub-film corrosion, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the TABLE BED SIDE STEEL: HFD-2005, then apply spray painting with two coat of synthetic enamel paint (Ivory white) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 46 | COUCH EXAMINATION - MASSAGE (STEEL) / TABLE CUSHIONED : FD-122(M) / 135(M) |
| 47 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Long Rail by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Long Rail made of MS tube 25mm dia of wall thickness 1.6mm, 1800mm long by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 48 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Short Rail by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Short Rail made of MS tube 25mm dia of wall thickness 1.6mm, 900mm long by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 49 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Leg by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Leg made of MS Square tube of size 25mm of wall thickness 1.6mm, 700mm long by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 50 | \\"Providing Materials and Labour (M&L) for the repair of various types of steel furniture articles. Work includes continuous run welding at damaged joints of legs, stiffeners, and framing where the metal thickness does not exceed 6 mm. All welded portions must be ground smooth, cleaned, and finished. All work shall be executed complete as per drawings, specifications, and the directions of the Engineer-in-Charge.\\" |
| 51 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Base of drawer carefully without disturbing the adjoining part and supply and fixing new Base of drawer ply of size 600x380mm of BWR 6mm thick plywood fixed with adhesive and headless nails, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 52 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Back of drawer carefully without disturbing the adjoining part and supply and fixing new Back of drawer of size 91x380mm made out of 12mm thick BWR plywood, both sides teak finished fixed, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 53 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Sides of drawer carefully without disturbing the adjoining part and supply and fixing new Sides of drawer of size 91x600mm made out of 12mm thick BWR plywood, both sides teak finished fixed, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 54 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable Shelf carefully without disturbing the adjoining part and supply and fixing new Shelf of size 400x300mm made out of 12mm thick BWR plywood, both sides teak finished fixed, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 55 | M & L for repair to Drawers of COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by rejointing the existing disjointed portion of drawers with approved adhessive/screws/nails, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 56 | S & F of Stainless steel spring, copper coated, 100mm dia, 100mm high duly fixed with cane stick 9mm dia as per the existing specifications and fixed for cushioned support, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 57 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable, complete fadded upholestery carefully without disturbing the adjoining part and supply and fixing new complete leatherite upholestery of approved colour/shade of 1500mm wide cost not less than Rs. 300.00 per RM fixed, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 58 | M & L for repair to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by taking down/removing the existing broken /unserviceable, complete worn out foam alongwith cotton layer and hassian cloth carefully without disturbing the adjoining part and supply and fixing new complete foam, 25mm thck 32 density alongwith 12 mm thick cotton layer and hassian cloth fixed, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 59 | M&L for painting to COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED by two coats of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the COUCH EXAMINATION-MASSAGE (STEEL)/ TABLE CUSHIONED, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 60 | CHAIR EASY (CUSHIONED) STEEL : FD-121(M) |
| 61 | M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down/removing the existing broken /unserviceable Leg by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Leg made of MS Square pipe of size 19mm of wall thickness 1.6mm made to shape 510mm high by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 62 | M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down/removing the existing broken /unserviceable Base Rail by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Base Rail made of MS Square pipe of size 19mm of wall thickness 1.6mm made to shape 700mm long by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 63 | M & L for repair to CHAIR EASY (CUSHIONED) STEEL by taking down the existing broken/unserviceable Hand Rest carefully without disturbing the adjoining part and supply and fixing of a new hand rest of finished size 19 mm x 65 mm x 700 mm fabricated out of 1st class teak wood, wrapped and padded with 12 mm (1/2\\") thick Polyurethane (PU) foam, and finished with leatherite upholstery of approved shade and quality; including all necessary adhesives, sleek fasteners, alignment, and finishing; complete in all respects as specified, as shown on drawing, and to the entire satisfaction and direction of the Engineer-in-Charge. |
| 64 | Repair to CHAIR EASY (CUSHIONED) STEEL (M&L): Dismantle and remove old, damaged seat cushion. Align the existing 19mm diameter Mild Steel ERW tubular frame to the specified rear leaning pitch. Securely and completely weld 19mm x 3mm flat steel cross-stiffener strips across the front and rear of the seat opening. Fix a 12mm thick Teak Wood (T.W.) commercial plywood floor base onto the steel strips from underneath using standard hex bolts, wide metal washers, and matching nuts through pre-drilled holes, ensuring zero rocking or sliding. Provide and fix a 40-density, 25mm thick PU foam cushion (560mm x 635mm x 25mm), encased in an inner linen cotton cloth and upholstered with premium leatherette cloth (minimum rate ₹250.00/metre) of approved colour and shade. Finish the assembly with a protective transparent plastic film cover, complete in all respects as per drawings and as directed by the Engineer-in-Charge. |
| 65 | Repair to CHAIR EASY (CUSHIONED) STEEL (M&L): Dismantle and remove old, damaged Back Rest cushion. Align the existing 19mm diameter Mild Steel ERW tubular frame to the specified rear leaning pitch. Securely and completely weld 19mm x 3mm flat steel cross-stiffener strips across the front and rear of the backrest opening. Fix a 12mm thick Teak Wood (T.W.) commercial plywood floor base onto the steel strips from underneath using standard hex bolts, wide metal washers, and matching nuts through pre-drilled holes, ensuring zero rocking or sliding. Provide and fix a 40-density, 25mm thick PU foam cushion (560mm x 355mm x 25mm), encased in an inner linen cotton cloth and upholstered with premium leatherette cloth (minimum rate ₹250.00/metre) of approved colour and shade. Finish the assembly with a protective transparent plastic film cover, complete in all respects as per drawings and as directed by the Engineer-in-Charge. |
| 66 | M & L for repair to CHAIR EASY (CUSHIONED) STEEL by rejointing the existing disjointed Flat iron cleats in between hand rest and MS square pipe by replacing the damaged steel scerws carefully without disturbing the adjoining part with new one of size 20x3 mm and fixed, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 67 | M & L for repair to CHAIR EASY (CUSHIONED) STEEL by rejointing the existing disjointed Metal Clamp at back side of seat rest by replacing the damaged steel scerws carefully without disturbing the adjoining part with new one and fixed properly, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 68 | M&L for painting to CHAIR EASY (CUSHIONED) STEEL by two coats of synthetic enamel paint of approved shade (dark brown) and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the CHAIR EASY (CUSHIONED) STEEL, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 69 | LOCKER 4 / 6 / 8 UNIT : FD-127 |
| 70 | M & L for repair to LOCKER 4/6/8 UNIT by taking down/removing the existing broken /unserviceable Leg by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Leg of size 420x100x100mm made out of 1mm thick Mild steel sheet by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 71 | M & L for replacement of brass chromium plated handle of size 50mm long fixed with internal metal screws to LOCKER 4/6/8 UNIT, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 72 | M & L for repair to LOCKER 4/6/8 UNIT by taking down/removing the existing broken /unserviceable Shutter by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Shutter as per the existing size and shape made out of 1mm thick Mild steel sheet by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 73 | M & L for repair to LOCKER 4/6/8 UNIT by taking down/removing the existing broken /unserviceable Lock from shutter carefully without disturbing the adjoining part and Supply and fixing of new 4 lever lock, brass with duplicate keys, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 74 | M & L for repair to LOCKER 4/6/8 UNIT by taking down/removing the existing broken /unserviceable Hanging rod carefully without disturbing the adjoining part and supply and fixing of new Hanging rod of brass chromium plated, 25mm dia, 1.6mm wall thickness, as per the existing length as shown on drawing duly fixed in exisiting support, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 75 | M&L for two coats to surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling metal putty to the uneven surfaces. After thoroughly preparation the surfaces of the LOCKER 8 UNIT, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make by implementing of dual color combination externally and internally through a spray machine to obtain a high gloss finish similar to new furniture including tightening of all loose components etc complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 76 | M&L for two coats to surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling metal putty to the uneven surfaces. After thoroughly preparation the surfaces of the LOCKER 6 UNIT, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make by implementing of dual color combination externally and internally through a spray machine to obtain a high gloss finish similar to new furniture including tightening of all loose components etc complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 77 | M&L for two coats to surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling metal putty to the uneven surfaces. After thoroughly preparation the surfaces of the LOCKER 4 UNIT, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make by implementing of dual color combination externally and internally through a spray machine to obtain a high gloss finish similar to new furniture including tightening of all loose components etc complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 78 | DESK SCHOOL CHILD TYPE 'A' : FD-124 (M) |
| 79 | M & L for repair to DESK SCHOOL CHILD TYPE 'A' by taking down/removing the existing broken /unserviceable Shelf Top carefully without disturbing the adjoining part and supply and fixing new Shelf Top of size 900x800mm made of 18mm thick prelaminated MDF Board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 80 | M & L for repair to DESK SCHOOL CHILD TYPE 'A' by taking down/removing the existing broken /unserviceable Leg by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Leg made of MS Tubuler pipe of size 25mm of wall thickness 1.6mm made to shape 560mm high with hard rubber Toe by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 81 | M & L for repair to DESK SCHOOL CHILD TYPE 'A' by tightening the lossen Flat Iron strip of size 25x3mm on shorter side by replacing the screws etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 82 | M & L for repair to DESK SCHOOL CHILD TYPE 'A' by Re-fixing of worn out existing wooden plank at back side and bottom side by replacing the screws etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 83 | M&L for painting to DESK SCHOOL CHILD TYPE 'A' by two coats of synthetic enamel paint of approved shade (dark brown) and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the DESK SCHOOL CHILD TYPE 'A', then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 84 | DESK FOR SCHOOL DRG CWE/SK/263(R ) & BENCH FOR SCHOOL DRG CWE/SK/263 - NSB : CWE/SK/263 & 263 ( R) |
| 85 | M & L for repair to DESK FOR SCHOOL by taking down/removing the existing broken /unserviceable Top carefully without disturbing the adjoining part and supply and fixing new Top of size 1200x450mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing with 8mm thick x 19 mm wide teak wood edging all around, fixed with adhesive and headless nails , complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 86 | M & L for repair to BENCH FOR SCHOOL by taking down/removing the existing broken /unserviceable seat carefully without disturbing the adjoining part and supply and fixing new Bench Top of size 1200x450mm made of 18mm thick Plywood BWR grade. The plywood must be fully treated with a termite- and moisture-resistant coating. Firmly adhere 25mm thick high-density foam to the plywood using a high-quality synthetic rubber adhesive & apply leatherette upholstery of rate not less than Rs. 300 per Metre with 8mm thick teak wood decorative crown moulding beading alround its edges duly fixed with suitable headless nails and seat duly fixed in position made to shape and size with suitable machanism, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 87 | M & L for repair to DESK/ BENCH FOR SCHOOL by taking down/removing the existing broken /unserviceable Legs by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Legs made of MS pipe of size 25mm dia of wall thickness 1.6mm made to shape 600mm long by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 88 | M&L for painting to DESK/ BENCH FOR SCHOOL by two coats of synthetic enamel paint of approved shade (dark brown) and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the DESK/ BENCH FOR SCHOOL, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 89 | DESK FOR SCHOOL DRG CWE/SK/258 (R ) & BENCH FOR SCHOOL DRG CWE/SK/263(R ) - NSB : CWE/SK/258 & 258 (R ) |
| 90 | M & L for repair to DESK FOR SCHOOL by taking down/removing the existing broken /unserviceable Top carefully without disturbing the adjoining part and supply and fixing new Top of size 1500x450mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing with 8mm thick x 19 mm wide teak wood edging all around, fixed with adhesive and headless nails, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 91 | M & L for repair to BENCH FOR SCHOOL by taking down/removing the existing broken /unserviceable seat carefully without disturbing the adjoining part and supply and fixing new Bench Top of size 1500x450mm made of 18mm thick Plywood BWR grade. The plywood must be fully treated with a termite- and moisture-resistant coating. Firmly adhere 25mm thick high-density foam to the plywood using a high-quality synthetic rubber adhesive & apply leatherette upholstery of rate not less than Rs. 300 per Metre with 8mm thick teak wood decorative crown moulding beading alround its edges duly fixed with suitable headless nails and seat duly fixed in position made to shape and size with suitable machanism, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 92 | M & L for repair to DESK/ BENCH FOR SCHOOL by taking down/removing the existing broken /unserviceable Legs by cutting the welded ends with hand held machine carefully without disturbing the adjoining part and supply and fixing new Legs made of MS pipe of size 25mm dia of wall thickness 1.6mm made to shape 650mm long by welding to the exact place and position and make the welded portion smooth by grinding etc, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 93 | M&L for painting to DESK/ BENCH FOR SCHOOL by two coats of synthetic enamel paint of approved shade (dark brown) and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the DESK/ BENCH FOR SCHOOL, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 94 | DESK WOODEN FOR KG : CWE(P)/V/SK01 (DHC) |
| 95 | M & L for repair to DESK WOODEN FOR KG by taking down/removing the existing broken /unserviceable Top carefully without disturbing the adjoining part and supply and fixing new Top of size 1210 x 450mm made of 12mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing with 4mm thick teak wood edging all around, fixed with adhesive and headless nails, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 96 | M & L for repair to DESK WOODEN FOR KG by taking down the existing broken /unserviceable Leg and supply and fixing of new Legs made to shape of size 50mmx50mm and 450mm long of 1st class teak wood, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 97 | M & L for repair to TABLE DESK WOODEN FOR KG by taking down the existing broken /unserviceable Long rail and supply and fixing of new long Rail of size 50mmx25mm, 1110 mm long made out of 1st class teak wood, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 98 | M & L for repair to TABLE DESK WOODEN FOR KG by taking down the existing broken /unserviceable Short rail carefully without disturbing the adjoining part and supply and fixing of new Short Rail of size 25mmx25mm, 350 mm long made out of 1st class teak wood, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 99 | M&L for painting to TABLE DESK WOODEN FOR KG by two coats of synthetic enamel paint of approved shade (dark brown) and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the TABLE DESK WOODEN FOR KG, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 100 | CHAIR WOODEN FOR KG : CWE(P)/V/SK02 (DHC) |
| 101 | M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable front Leg and supply carefully without disturbing the adjoining part and fixing of new front Legs made to shape of size 40mmx40mm and 295 mm long of 1st class teak wood, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 102 | M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable rear Leg carefully without disturbing the adjoining part and supply and fixing of new rear Legs made to shape of size 40mmx40mm and 600 mm long of 1st class teak wood, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 103 | M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable short stiffener carefully without disturbing the adjoining part and supply and fixing of new short stiffener made to shape of size 50mmx25 mm and 275 mm long of 1st class teak wood, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 104 | M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable long stiffener carefully without disturbing the adjoining part and supply and fixing of new long stiffener made to shape of size 50mmx25 mm and 305 mm long of 1st class teak wood, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 105 | M & L for repair to CHAIR WOODEN FOR KG by taking down/removing the existing broken /unserviceable seat base carefully without disturbing the adjoining part and supply and fixing new seat base of size 305mmx275mm made of 18mm thick Plywood BWR grade. The plywood must be fully treated with a termite- and moisture-resistant coating. Firmly adhere 25mm thick high-density foam to the plywood using a high-quality synthetic rubber adhesive & apply leatherette upholstery of rate not less than Rs. 300 per Metre with 4mm thick teak wood decorative crown moulding beading alround its edges duly fixed with suitable headless nails and seat duly fixed in position made to shape and size with suitable machanism, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 106 | M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable top rest carefully without disturbing the adjoining part and supply and fixing of new top rest made to shape of size 25 mmx 50 mm and 280mm long of 1st class teak wood, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 107 | M & L for repair to CHAIR WOODEN FOR KG by taking down the existing broken /unserviceable middle rest carefully without disturbing the adjoining part and supply and fixing of new middle rest made to shape of size 25 mmx 35 mm and 280mm long of 1st class teak wood, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 108 | M&L for painting to CHAIR WOODEN FOR KG by two coats of synthetic enamel paint of approved shade (dark brown) and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the CHAIR WOODEN FOR KG, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 109 | DESK AND BENCH (NSB) : SKT-03 |
| 110 | M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable Bench Top carefully without disturbing the adjoining part and supply and fixing new Bench Top of size 900x400mm made of 18mm thick Plywood BWR grade. The plywood must be fully treated with a termite- and moisture-resistant coating. Firmly adhere 25mm thick high-density foam to the plywood using a high-quality synthetic rubber adhesive & apply leatherette upholstery of rate not less than Rs. 300 per Metre with 4mm thick teak wood decorative crown moulding beading alround its edges duly fixed with suitable headless nails and seat duly fixed in position made to shape and size with suitable machanism, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 111 | M & L for repair to DESK AND BENCH (NSB) by taking down/removing the existing broken /unserviceable Bench Top carefully without disturbing the adjoining part and supply and fixing new Bench Top of size 910x330mm made of 18mm thick Plywood BWR grade. The plywood must be fully treated with a termite- and moisture-resistant coating. Firmly adhere 25mm thick high-density foam to the plywood using a high-quality synthetic rubber adhesive & apply leatherette upholstery of rate not less than Rs. 300 per Metre with 4mm thick teak wood decorative crown moulding beading alround its edges duly fixed with suitable headless nails and seat duly fixed in position made to shape and size with suitable machanism, completed all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 112 | M&L for painting to DESK AND BENCH (NSB) by two coats of synthetic enamel paint of approved shade (dark brown) and quality over a coat of red-oxide primer by means of spray painting including preparation of surface by removing of old paint by using grinding machine, filling putty to the uneven surfaces. After thoroughly preparation the surfaces of the DESK AND BENCH (NSB), then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 113 | SOFA SET 4 SEATER (3+1) / SOFA 3 SEATER (2+1) (FD-272 / 258) |
| 114 | M & L for repair to SOFA SET 4 SEATER (3+1) by removing the following unserviceable components carefully without disturbing the adjoining part and tightening the entire wooden frame using nails and screws and carry out the following works in sequence, complete all as specified, shown on drawing and as directed by Engr-in-Charge:-(i) Cool foam of density 40 of approved make in seat, back and sides (ii) SS spring 100 mm dia Copper coated of 100 mm high to be replaced with U/S one duly fixed with cane stick 9 mm dia (iii) Hessain cloth for the base and side at the egdes & base (iv) Markin cloth as initial cover over cool foam(v) Replacement of tapestry cloths for Base and Back rest of superior quality of approved shade/colour by the user of 4' wide, costing not less than Rs. 300.00 Per RM, duly stiched by the upholster as directed by the Engr-in-charge. |
| 115 | M&L for Polishing to SOFA SET 4 SEATER (3+1) by two coats of melamine polish of approved shade and quality over a coat of wood primer by means of spray painting including preparation of surface by removing of old polish by using grinding machine, filling putty/wood filler to the uneven surfaces. After thoroughly preparation the surfaces of the Sofa Set 4 Seater, (3+1), then apply spray polishing with two coat of melamine polish of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 116 | M & L for repair to SOFA 3 SEATER (2+1) by removing the following unserviceable components carefully without disturbing the adjoining part without damaging the adjacent wooden parts, tightening the entire wooden frame using nails and screws and carry out the following works in sequence complete all as specified, shown on drawing and as directed by Engr-in-Charge:-(i) Cool foam of density 40 of approved make in seat, back and sides (ii) SS spring 100 mm dia Copper coated of 100 mm high to be replaced with U/S one duly fixed with cane stick 9 mm dia (iii) Hessain cloth for the base and side at the egdes & base (iv) Markin cloth as initial cover over cool foam(v) Replacement of tapestry cloths for Base and Back rest of superior quality of approved shade/colour by the user of 4' wide, costing not less than Rs. 300.00 Per RM, duly stiched by the upholster, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 117 | M&L for Polishing to SOFA SET SOFA 3 SEATER (2+1) by two coats of melamine polish of approved shade and quality over a coat of wood primer by means of spray painting including preparation of surface by removing of old polish by using grinding machine, filling putty/wood filler to the uneven surfaces. After thoroughly preparation the surfaces of the Sofa Set SOFA 3 SEATER (2+1), then apply spray polishing with two coat of melamine polish of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 118 | CHARPOY GI PLY TOP FD-220 ® |
| 119 | M & L for repair to CHARPOY GI PLYTOP by taking down the existing broken /unserviceable angle frame carefully without disturbing the adjoining part and replacing the same with new MS angle frame of size 25x25x3 mm, 890 mm long fixed to charpoy by welding the ends to both side long rail at an equal distance for resting the ply top and connecting to 32 mm GI pipe from underneath, complete all as specified, shown on drawing and as directed by Engr-in-Charge |
| 120 | M & L for repair to CHARPOY GI PLYTOP by taking down the existing broken /unserviceable square frame carefully without disturbing the adjoining part and replacing the same with new MS square frame of size 25 mm of 1.6 mm thick ,890 mm length fixed to charpoy by welding the ends to both side long rail at an equal distance for resting the ply top and connecting to 32 mm GI pipe from underneath, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 121 | M & L for Repairs to Charpoy CHARPOY GI PLYTOP by taking down the existing broken /unserviceable legs carefully without disturbing the adjoining part and replacing the same with new MS conduit pipe leg of 32 mm dia of 18 gauge,440 mm long fixed to existing 3 way elbow, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 122 | S&F of 32 mm dia GI 3 way elbow in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 123 | S&F of GI checknut complete in repair,all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 124 | M & L for repair to CHARPOY GI PLYTOP by taking down/removing the existing broken /unserviceable Plytop carefully without disturbing the adjoining part and S & F new plytop pf 12mm thick plywood of size 1980x900mm by making necessary cutting at edges duly fixed on GI pipe frame with 10mm dia nuts, bolts and washer ,including painting of Charpoy GI with one coat of synthetic enamelled paint (1st quality) over a coat of pink Primer by spray machine to match the existing colour/shade, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 125 | SOFA SINGLE SEATER : FD-373/281 |
| 126 | M & L for repair to SOFA SET SINGLE SEATER, by Removing broken legs of sofa chairs carefully without disturbing the adjoining part and supply and fixing the new legs of size 70x35x515mm made of 1st class teak wood using screw, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 127 | M & L for repair to SOFA SET SINGLE SEATER by Removing broken arm rest of sofa chairs carefully without disturbing the adjoining part and supply and fixing the new arm rest of size 70x35x745mm made of 1st class teak wood using screw, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 128 | M & L for repair to SOFA SET SINGLE SEATER by Removing broken batten of sofa chairs carefully without disturbing the adjoining part, supply and fixing the new batten of size 50x20x585mm made of 1st class teak wood using screw, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 129 | M & L for repair to SOFA SET SINGLE SEATER by Removing broken short rail carefully without disturbing the adjoining part, supply and fixing the new short rail of size 100x35x570 mm made of 1st class teak wood using screw, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 130 | M & L for repair to SOFA SET SINGLE SEATER by Removing broken long rail carefully without disturbing the adjoining part and supply and fixing the new long rail of size 100x35x625 mm made of 1st class teak wood using screw, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 131 | M & L for repair to SOFA SET SINGLE SEATER by Removing broken short bearer of sofa carefully without disturbing the adjoining part, supply and fixing the new short bearer of size 40x40x530mm made of 1st class teak wood using screw, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 132 | S & F of Nylon bushes for legs of sofa chair in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 133 | M & L for taking out old/faded Cusion cover from SOFA 1/4/5 SEATER and supply and fixing new cushion cover with inner linen cloth and best tapestry cloth not less than Rs 250.00 per metre of 48\\" wide of approved color and shade to the existing cushion of size (21\\"x22\\"x4\\"). Each cushion cover shall be provided with best quality SS zipper stitched on one edge of cushion cover covered under the flap of cloth with standard fitting complete all as specified, shown on drawing and as directed by Engr-in-Charge. (Note: Tapestry cloth:- It shall be heavy linen look fabric, plain velvet fabric or as per approved sample placed in BSO yard). |
| 134 | M & L for repair to SOFA 1/4/5 SEATER (1+1+1+1/3+1+1) by Taking out old pressed /torn cushions from each set and Supply of 40 density,100mm thick PU foam cushion of size 530mmx560mmx100mm duly covered with inner linen cloth and best tapestry cloth not less than Rs 250.00 per metre of 48\\" wide of approved color and shade. Each cushion cover shall be provided with best quality SS zipper stitched on one edge of cushion cover covered under the flap of cloth with standard fitting complete all as specified, shown on drawing and as directed by Engr-in-Charge. (Note: Tapestry cloth:- It shall be heavy linen look fabric ,plain velvet fabric or as per approved sample placed in BSO yard) |
| 135 | M&L for Polishing to SOFA SET 4/5 SEATER (1+1+1+1/3+1+1) by two coats of melamine polish of approved shade and quality over a coat of wood primer by means of spray painting including preparation of surface by removing of old polish by using grinding machine, filling putty/wood filler to the uneven surfaces. After thoroughly preparation the surfaces of the Sofa Set 4/5 SEATER (1+1+1+1/3+1+1), then apply spray polishing with two coat of melamine polish of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 136 | M & L to SOFA SET 4/5 SEATER (1+1+1+1/3+1+1) for Upholstery, Cushioning, Polishing and Fabric Fitting Supporting Framework for SOFA SET 4/5 SEATER (1+1+1+1/3+1+1): The upholstery must be supported by structurally sound and suitable wooden frames, wooden rails, wooden battens, and necessary structural stiffeners. Fabric Specifications: Best quality tapestry cloth not less than Rs 350 per metre of 48\\" wide of approved colour and shade. Coverage Area: Seamless upholstery covering all inner and outer visible faces as shown on drawing, strictly excluding the exposed polished handrest frame and legs. Polishing of handrest frame and legs:- Applied two coats of high-grade Melamine Glossy Polish over a coat of wood primer by using a professional spray machine. Execution: After the handrests & legs have been polished fabric must be mechanically stretched and wrapped perfectly tight across the structure to guarantee a completely shrinkage-free and wrinkle-free (wrinkleless) lifelong fitting. After completing the upholstery (inner and outer fittings), the cushions must be properly fixed to the seats and backrests of the sofa set. Cushioning: Single continuous cushion for the Seat Base (1590mm approx x 560mm approx), Back Base (1590mm approx x 485mm approx) and Seat Base (560mm approx x 530mm approx), Back Base (560mm approx x 485mm approx) for the 3-Seater Sofa and 4-Seater(1+1+1+1) Sofa respectively. Core Foam: 100 mm (4\\") thickness high-density Polyurethane (PU) Foam with a minimum density rating of 40 Density. Internal Protection: The precision-cut PU foam core must be fully wrapped and enclosed in a protective layer of premium Muslin (Malmal) cloth. Outer Removable Covers: Fabricated using the approved premium tapestry cloth not less than Rs 350 per metre of 48\\" wide of approved color and shade matching the sofa body. Zipper Mechanism: Heavy-duty Stainless Steel (SS) zipper stitched seamlessly on one complete edge of the cushion cover. Zipper Concealment: The SS zipper must be hidden neatly underneath an integrated fabric flap (under-flap cloth design) with standard professional tailoring and fittings, complete all as specified, shown on drawing and as directed.by Engr-in-Charge. (Note: Tapestry cloth:- It shall be heavy linen look fabric ,plain velvet fabric or as per approved sample placed in BSO yard). |
| 137 | TABLE DRESSING LADIES : FD-378 |
| 138 | M & L for Repairs to TABLE DRESSING LADIES by taking down the existing broken /unserviceable Looking Mirror carefully without disturbing the adjoining part and replacing the same in position with new Looking Mirror made of 5mm thick glass of size 1220x370mm duly supported with 6mm thick plywood, BWR, Grade A and fixed, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 139 | Taking down the existing broken /unserviceable Teak Wood Beading carefully without disturbing the adjoining part and replacing the same with new Teak Wood Beading of size 35mmx45mm fixed with screws as required, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 140 | M & L for Repairs to TABLE DRESSING LADIES by taking down the existing broken /unserviceable Back carefully without disturbing the adjoining part and replacing the same in position with new Back made of 6 mm thick Plywood, BWR, Grade-A of size 1220mm x 370mm duly fixed with suitable wooden screw, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 141 | M & L for Repairs to TABLE DRESSING LADIES by taking down the existing broken /unserviceable chamber carefully without disturbing the adjoining part and S & F new chamber made of 18 mm thick MDF board of size 380x900x450 mm with alround 3 mm TW beeding and two drawers having 12 mm TW at back & sides and 6 mm ply at bottom made to shape of size 425x160x380 mm with four hard wood base 60x10 mm size in four base corner, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 142 | M & L for Repairs to TABLE DRESSING LADIES by taking down the existing broken /unserviceable Sliding glass carefully without disturbing the adjoining part and replacing the same in position with new Sliding glass made of 5.5mm thick clear tempered glass of size 425x160 mm duly fixed in existing Aluminium channel at bottom upper space of bottom chamber, drill a small hole in the glass to slide it and securely tighten the metalic knob, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 143 | S & F of SS knobs 40 mm dia in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 144 | M&L for Polishing to TABLE DRESSING LADIES by two coats of melamine polish of approved shade and quality over a coat of wood primer by means of spray painting including preparation of surface by removing of old polish by using grinding machine/emery paper, filling putty/wood filler to the uneven surfaces. After thoroughly preparation the surfaces of the TABLE DRESSING LADIES, then apply spray polishing with two coat of melamine polish of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 145 | M & L for Repairs to DRESSING STOOL (Drg No. FD-374) by taking down the existing damaged Seat Cushion carefully without disturbing the adjoining part and replacing the same in position with new Seat Cushion made to shape of size 380x450 mm with 50mm thick 32 density PU foam duly covered with best quality tapestry cloth of rate not less than Rs. 250.00 per Metre, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 146 | TABLE DRESSING GENTS : FD-379 |
| 147 | M & L for Repairs to TABLE DRESSING GENTS by taking down the existing broken /unserviceable Looking Mirror carefully without disturbing the adjoining part and replacing the same in position with new Looking Mirror made of 5.5mm thick glass of size 760x380mm duly supported with 6mm thick plywood, BWR, Grade A and fixed, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 148 | taking down the existing broken /unserviceable Teak Wood Beading carefully without disturbing the adjoining part and replacing the same with new Teak Wood Beading of size 25mmx25 mm fixed with screws as required all as shown on drawing, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 149 | M & L for Repairs to TABLE DRESSING GENTS by taking down the existing broken /unserviceable Back carefully without disturbing the adjoining part and replacing the same in position with new Back made of 6 mm thick Plywood, BWR, Grade-A of size 760mm x 380mm duly fixed with suitable wooden screw, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 150 | S&F of new TW batten of size 25x35x1090 mm in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 151 | M & L for Repairs to TABLE DRESSING GENTS by taking down the existing broken /unserviceable chamber carefully without disturbing the adjoining part and S & F new chamber made of 18 mm thick MDF board of size 300x900x150 mm with alround 3 mm TW beeding and two drawers having 12 mm TW at back & sides and 6 mm ply at bottom made to shape of size 425x160x380 mm with four hard wood base 60x10 mm size in four base corner, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 152 | S & F of SS knobs 30 mm dia in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 153 | M&L for Polishing to TABLE DRESSING GENTS by two coats of melamine polish of approved shade and quality over a coat of wood primer by means of spray painting including preparation of surface by removing of old polish by using grinding machine/emery paper, filling putty/wood filler to the uneven surfaces. After thoroughly preparation the surfaces of the TABLE DRESSING GENTS, then apply spray polishing with two coat of melamine polish of approved make through a spray machine to obtain a high gloss finish similar to new furniture complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 154 | ALMIRAH LARGE STEEL 1/2 H X 1/2 S : FD-114 |
| 155 | S & F of Lock, 75x50 mm size, 6 lever lock, brass with duplicate keys fixed with screw/spot weld to shutter of Almirahs in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 156 | M & L for repair to ALMIRAH LARGE STEEL 1/2 H X 1/2 S by taking down/removing the existing broken /unserviceable Box Cover carefully without disturbing the adjoining part and supply and fixing of new key Box Cover made of 1 mm thick MS sheet of same size 250x120x40 mm duly fixed fixed to almirah steel, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 157 | Supply and fixing of 3-way assembly including 6mm thick bars round with necessary fittings of approved quality in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. by Engr-in-Charge. |
| 158 | S & Fof Handle, 120mm size, chromium plated fixed to Almirahs in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 159 | Removing old unserviceable broken bush between 3 way lock device from Almirahs carefully without disturbing the adjoining part and supply and fix new brass bush, complete all as specified, shown on drawing and as directed by Engr-in-Charge. by Engr-in-Charge. |
| 160 | M & L for repair to ALMIRAH LARGE STEEL 1/2 H X 1/2 S by taking down/removing the existing unserviceable/rusted bottom sheet carefully without disturbing the adjoining part and supply and fix new bottom made out of 1mm thick MS sheet made to shape and size (920 X 485 mm) as on drawing and fixing by welding matching with existing almirah, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 161 | S & F of 20mm dia hanging/curtain rod, 1.25mm wall thickness, chromium plated with and including CP end socket/bracket fixed with screws to Almirah in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 162 | M & L for repair to ALMIRAH LARGE STEEL 1/2 H X 1/2 S by taking down/removing the existing broken /unserviceable Leg carefully without disturbing the adjoining part and supply and fixing of new Leg made of 1.5 mm thick MS sheet of same size 100(W)x 480(L)x 100(H) mm duly fixed fixed to almirah steel, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 163 | M& L for Removing old broken hinges of Almirahs steel carefully without disturbing the adjoining partand S & F new MS hinges or U clips 70 / 75 mm long duly welded, complete all as specified, shown on drawing and as directed by Engr-in-Charge. by Engr-in-Charge. |
| 164 | M & L for repair to ALMIRAH LARGE STEEL 1/2 H X 1/2 by taking down/removing the existing broken /unserviceable dented/hanging Door Shutter carefully without disturbing the adjoining part and re-fixed the same to almirah with and including new hinges, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 165 | M & L for repair to ALMIRAH LARGE STEEL 1/2 H X 1/2 by taking down/removing the existing broken /unserviceable Door Shutter carefully without disturbing the adjoining parts Supply and fixing of new Door Shutter made of 1.6 mm thick MS sheet of same size Approx 445mmx1885mm duly fixed to almirah steel complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 166 | M & L for repair to ALMIRAH LARGE STEEL 1/2 H X 1/2 by taking down/removing the existing dented/hanging Shelves carefully without disturbing the adjoining part and re-fixed the same to almirah steel with new cleats, nuts & bolts, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 167 | M & L for repair to ALMIRAH LARGE STEEL 1/2 H X 1/2 by taking down/removing the existing broken /unserviceable Shelves carefully without disturbing the adjoining part and supply and fixing of new Shelves made of 1 mm thick MS sheet of size Approx 440mm x 800mm fixed to almirah steel with cleats, nuts & bolts, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 168 | M&L for two coats to surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling metal putty to the uneven surfaces. After thoroughly preparation the surfaces of the Almirah Large Steel 1/2 H X 1/2, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make by implementing of dual color combination externally and internally through a spray machine to obtain a high gloss finish similar to new furniture including tightening of all loose components etc complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 169 | ALMIRAH LARGE STEEL / SMALL STEEL : FD-351 / 350 |
| 170 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable Lock from shutter carefully without disturbing the adjoining part and supply and fixing of new 6 lever lock,size (75x50) mm, brass with duplicate keys, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 171 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable Inside Box Cover carefully without disturbing the adjoining part and supply and fixing of new Inside Box Cover made of 1 mm thick MS sheet of size 250x120mm duly fixed to almirah steel, complete all as specified, shown on drawing and as directed by Engr-in-Charge |
| 172 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable 3-Way locking assembly from shutter carefully without disturbing the adjoining part and supply and fixing of new 3-Way locking assembly made of 6mm dia mild steel round bar with necessary fittings of approved quality, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 173 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable Handle from shutter carefully without disturbing the adjoining part and supply and fixing of new Handle, 120mm size, chromium plated , complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 174 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable broken bush between 3 way locking device carefully without disturbing the adjoining part and supply and fixing of new bush as per the existing size and specifications, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 175 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable Bottom sheet of size (950x450)mm carefully without disturbing the adjoining part and supply and fixing of new Bottom sheet made of 1 mm thick MS sheet of same size and shape duly fixed fixed to almirah steel, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 176 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable Leg from bottom of almirah small by unriveting and using hand held cutting machine carefully without disturbing the adjoining part and Supply and fixing new Leg made of 1.5mm thick MS sheet of size 440x100x80mm fixed to almirah steel to the existing place through welding and riveting, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 177 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable Leg from bottom of almirah large by unriveting and using hand held cutting machine carefully without disturbing the adjoining part and supply and fixing new Leg made of 1.5mm thick MS sheet of size 480x100x100mm fixed to almirah steel to the existing place through welding and riveting, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 178 | S & F of mild steel Hinge or U clip 70/75mm long duly welded to ALMIRAH LARGE/SMALL STEEL in repair, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 179 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable Shelves carefully without disturbing the adjoining part and supply and fixing of new Shelves made of 1 mm thick MS sheet of size 440x800mm fixed to almirah steel with cleats, nuts & bolts, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 180 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing broken /unserviceable dented/hanging Door Shutter carefully without disturbing the adjoining part and re-fixed the same to almirah with and including new hinges, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 181 | M & L for repair to ALMIRAH LARGE STEEL by taking down/removing the existing broken /unserviceable Door Shutter carefully without disturbing the adjoining parts Supply and fixing of new Door Shutter made of 1.6 mm thick MS sheet of same size 445mmx1885mm duly fixed to almirah steel complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 182 | M & L for repair to ALMIRAH SMALL STEEL by taking down/removing the existing broken /unserviceable Door Shutter carefully without disturbing the adjoining parts Supply and fixing of new Door Shutter made of 1.6 mm thick MS sheet of same size 385mmx1090mm duly fixed to almirah steel complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 183 | M & L for repair to ALMIRAH LARGE/SMALL STEEL by taking down/removing the existing dented/hanging Shelves carefully without disturbing the adjoining part and re-fixed the same to almirah steel with new cleats, nuts & bolts, complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 184 | M&L for two coats to surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling metal putty to the uneven surfaces. After thoroughly preparation the surfaces of the Almirah Large, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make by implementing of dual color combination externally and internally through a spray machine to obtain a high gloss finish similar to new furniture including tightening of all loose components etc complete all as specified, shown on drawing and as directed by Engr-in-Charge. |
| 185 | M&L for two coats to surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling metal putty to the uneven surfaces. After thoroughly preparation the surfaces of the Almirah Small, then apply spray painting with two coat of synthetic enamel paint (1st quality) of approved make by implementing of dual color combination externally and internally through a spray machine to obtain a high gloss finish similar to new furniture including tightening of all loose components etc complete all as specified, shown on drawing and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender