Tender For Comprehensive Repairs/Maint To Otm/Md Accn In Zone C And D Area Of Age B/R-I Under Ge (East) Lucknow
Tender Value
45 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
11 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repairs/Maint To Otm/Md Accn In Zone C And D Area Of Age B/R-I Under Ge (East) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Note for item no-02 to 1181. The above day to day complaints will be collected from Complaint Cell during working Hrs by contractor Representative daily and will be executed as directed by Engr-in-Charge.2. The complaints should be completed with-in the time stipulated under Schedule A Notes for above said items.3. During the day to day Complaint the attender should wear proper dress.4. The unit rate quoted by the contractor shall interalia deemed into the cost of engaging sufficient man power to complete the work assigned. One computer data entry operater and one helper will be appointed by bidder at location of Complaint Cell as decided by EIC. Mason/plumber with sufficient quantity of helper will be provided by contractor to rectify the defects at site and collection of user certificate that complaint satisfactorly completed at site and it will be deposited to EIC by contractor on daily basis.5. A Register shall be maintained their deployment at site mentioning time and date duly signed by concern JE, Engr-in-charge and contractor and the same register shall be produced while claiming the payment by the tenderer. |
| 2 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, all as directed. |
| 3 | M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete, all as specified. |
| 4 | M&L for 15mm thick rendering in CM 1:4 with on fair surfaces of walls finished even and smooth without using extra cement complete all as specified. |
| 5 | M&L for rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement, complete, all as specified |
| 6 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified. |
| 7 | M&L for Preparation of new or previously undercoated surface of ceiling and applying three coats of white wash on ceiling all as specified and directed. |
| 8 | M&L for Preparation of new plastered surface of wall and applying two coats of OBD over a coat of primer on wall all as specified and directed. |
| 9 | M&L for Preparation of old surface of ceiling and applying one coat of white wash on ceiling all as specified and directed. |
| 10 | M&L for Preparation of old surfaces of wall & applying one coat of cement base paint of approved shade/tint complete all as specified. |
| 11 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of oil emulison distemper (OBD) complete all as specified & as directed. |
| 12 | M&L for providing and applying white care putty of 1-2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified & as directed. |
| 13 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and directed. |
| 14 | Taking down chawkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and directed. |
| 15 | S&F 85x45mm single rebated factory made 100% solid WPC prelem both side (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum all as specified and directed. Make: Rajshree/Sintex |
| 16 | S&F 65x100 mm single rebated factory made 100% solid WPC prelem both side (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum all as specified and directed. |
| 17 | S&F 65x125 mm double rebated factory made 100% solid WPC prelem both side (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum all as specified and directed. |
| 18 | S&F Factory made 30 mm thick 100% solid WPC (Wood Polymer Composite) solid both side prelem 0.14 micron Flush door shutter with 10mm deep CNC moulding design of required size comprising of virgin PVC resin of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 19 | S&F 30mm thick factory made solid WPC (Wood plastic composite) moulded glazed door shutter with wire mesh in 8 number of division with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperature 1.4mm shall to be fixed with 15x15 square tube in side rails with screwing 8x28 heat metel zink coated screws can be remove of fix again after changing of wire mesh needed. The density shall be as per manufacture instruction complete all as specified and as directed |
| 20 | S&F for XPM Aluminium alloy wire cloth of wire all as specified and directed. |
| 21 | S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain or prelem PVC sheet reinforced with MS Square tube etc all as specified and directed. |
| 22 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plain or prelem PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain or prelem PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour t tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc all as specified. |
| 23 | S&F powder coated aluminium anodised frame/chowkat of Alu door fixed with rawal plug and screw or wire expansion hold fasteners complete all as specified & as directed. |
| 24 | S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified & as directed. |
| 25 | S&F for powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified & as directed. |
| 26 | S&F powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified & as directed. |
| 27 | M & L for in repair for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as directed. |
| 28 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads all as specified and directed. |
| 29 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified. |
| 30 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apeerture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, all as directed. |
| 31 | S&F butt hinges of size 100mm medium weight, stainless steel ISI marked complete all as specified. |
| 32 | S&F 200 mm long aluminium anodised barrel tower bolts of extruded section all as specified. |
| 33 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section all as specified. |
| 34 | S&F 150 mm size aluminium alloy handles, fabricated type, extruded section. |
| 35 | S&F in repair 100 mm butt hinges extruded SS,with mild steel hing pin ,bright polished and fixed, type B-11 |
| 36 | S&F in repair 75mm butt hinges extruded brass,with mild steel hing pin ,bright polished and fixed, type B-12 |
| 37 | S&F in repair 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified. |
| 38 | S&F in repair 75mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws |
| 39 | S&F in repairs aluminium extruded section body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. and fixed. |
| 40 | S&F in repairs 150mm long fancy Stailles steel handle for cupboard & wardrobe shutter complete all as specified and as directed by Engr-in-charge |
| 41 | S&F in repairs Stailles steel 200mm long fancy handle for wardrobe shutter complete all as specified and as directed by Engr-in-charge |
| 42 | S&F in repairs 100mm brass Mortice lock, vertical type, 4-lever complete all as specified and as directed. |
| 43 | M & L for 18/19 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work fixed as in repairs. |
| 44 | S&F 18 mm thick solid WPC board one side prelaminated decoratiove teak face and other side white and balancing as in kitchen shelf, shutters etc including chawkats and all fitting accessories etc including dismantling complete all as specified and directed |
| 45 | S&F 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed |
| 46 | S&F 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed |
| 47 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws. |
| 48 | S&F floor door stopper as in repair of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified. |
| 49 | S&F in repair Hat pegs, solid body,125mm to 175 mm brass fancy type, all as specified fixed |
| 50 | S&F as in repair mild steel helical door spring 150mm ordinary rat tail rod pattern spring including roller and roller plate including welding if required complete all as specified. |
| 51 | S&F in repairs 50mm dia, polished, hard wood knobs fixed with screw |
| 52 | S&F in repairs Ball catches with 150 mm long & 8mm dia steel ball, and brass body and striking plate including letting in and fixed |
| 53 | S&F 125 mm dia CP brass shower rose incl shower arms with or without swivel joints any size including fixing to steel pipe or union add if fixed in repair all as specified and directed. |
| 54 | S&F as in repair CP soap dish any type fixed to plugs with chromium plated brass screws all as specified. |
| 55 | Supply and fixed in repairs 600x450mm beveled edges mirror of selected quality mounted on 4mm thick AC building board/ PVC frame or 6mm thick ply fixed to wall with rowl plug and screws complete all as specified. |
| 56 | S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed. |
| 57 | S&F in repair for three layer rotational moulded polyethylene water storage tank cylindrical hoisted & fixed in position incl dismantiling water tank complete all as specifed capacity 500 ltrs. |
| 58 | S&F for in repair three layer rotational moulded polyethylene water storage tank cylindrical hoisted & fixed in position incl dismantiling water tank complete all as specifed capacity 1000 ltrs. |
| 59 | S&F for in repair three layer rotational moulded polyethylene water storage tank cylindrical hoisted & fixed in position incl dismantiling water tank complete all as specifed capacity 2000 ltrs. |
| 60 | S&F in repair 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight 455 gms. |
| 61 | S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight 210 gms. |
| 62 | S&F in repair 15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight 142 gms. |
| 63 | S&F in repairs brass chromium plated wall mixer for mixing hot & cold water with provn for overhead shower with 15mm long bend pipe all as specified and as directed. |
| 64 | S&F brass chromium plated single hole basin mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved quality |
| 65 | S&F brass chromium plated single hole Sink mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved quality |
| 66 | S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified. |
| 67 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550x400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified. |
| 68 | S&F in repairs vitreous china wash hand basin, 600x480mm counter top oval shape cascade pattern with pillar tap cast copper alloy ,capstan head CP,PVC connection,CP bottle trap, PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed,complete all as specified. |
| 69 | S&F Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe ). and trap including connection to drain (or out going pipe) and to flushing pipe anti sphonage pipe etc complete including flush pipes and all joints add if fixed in repairs. |
| 70 | S&F in repairs Plastic water closet seat cover coloured/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed. |
| 71 | S&F in repair 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan pre-made |
| 72 | S&F in repairs vitreous china urinal half stall type white excluding flushing cistern ,flush pipe and waste pipe |
| 73 | S&F in repairs glass corner shelf assembly consisting of 5.5mm thick sheet glass 250X250mm size fixed with chromium plated brackets as in repairs all as directed. |
| 74 | S&F in repair glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long all as specified. |
| 75 | S&F in repair PVC floor trap plain with grating including jointing with solventt in run lead 75/100 mm out let complete all as specified. |
| 76 | S&F 15 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down |
| 77 | S&F 20 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down |
| 78 | S&F CP brass towel rails 20 mm dia and 600 mm long fixed as in repair incl chromium plated brass screw and wooden / cleats. |
| 79 | S&F in repairs PVC cabinet with mirror and door of size 560X410mm all as specified and directed. |
| 80 | S&F in repair health faucet for EWC CP hand hold with flexible pipe 1.5m long complete set all as specified. |
| 81 | S&F C P angle valve for 15 mm bore pipe fixed as in repair. |
| 82 | S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 20mm bore fixed in repair. |
| 83 | S&F in repair 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, scresed down screwed for iron pipe or for brass ferrule and fixed both ends for iron pipe or for unions |
| 84 | S&F in repair fancy type piller taps 15 mm cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered (hot or cold) with long screwed shanks and flynuts screwed for iron pipe and fixed |
| 85 | S&F in repair CP concealed stop cock for 15 mm bore pipe fixed |
| 86 | S&F in repairs CP toilet paper holder fixed to wall with chromium plated brass screws of approved quality all as specified. |
| 87 | S&F in repair Hat pegs, solid body,125mm to 175 mm brass fancy type, all as specified fixed |
| 88 | S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall all as specified and directed. |
| 89 | S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall all as specified and directed by Engineer-in-charge. |
| 90 | S&F 110mm bore PVC (SWR) bends, any radius. |
| 91 | S&F PVC (SWR) bends any radius of 75 mm dia all as specified. |
| 92 | S&F stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete, all as directed. |
| 93 | S&F sink made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink. |
| 94 | S&F kitchen sink with drainage board made of stainless steel 1mm for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brakkets, bedding in cement mortar on to dwarf wall, conntecting union to pipe, overall mimimum size 915mmx460mm with bowl size 410mmx330mmx160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waster fitting with long screwed shanks and fly nuts, flage end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete including taking down old unserviceable sink. |
| 95 | Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified. |
| 96 | M&L for 100mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified & directed. |
| 97 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, all as specified and directed |
| 98 | M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed bed 15mm thick in CM 1:6, base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 99 | M&L Glazed ceramic tiles in vertical surfaces 600x300x7 thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 100 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors including screed bed 15mm thick or beding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 101 | S&F vitrified ceramic tiles dark shade digital tiles/(double charged), 10mm thick (square/ rectanglar) polished , exceeding 0.18 sqm of each tiles not exceeding 0.38 sqm, in floors etc. laid over 15mm thick screed bed 1:4 , set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified. |
| 102 | M&L for Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick, set, jointed and pointed in neat cement slurry with gray cement and pig mentss over 15mm thick screed bed 1:4 , set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specifiedin floor, paving, path etc |
| 103 | S&F exterior tiles of superior quility300x300/400x400x10-12MM thick of approved size/design/shade set and jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in cm 1:4 complete all as specified and directed. |
| 104 | M & L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand |
| 105 | Dismantling of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar |
| 106 | M&L for 20 mm thick granite (of any type and colour ) work (table rubbed and polished ) in steps, Jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete all as specified. |
| 107 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 108 | Dismantling AC sheet (Corrugated, Semi Corrugated etc) as in roofs etc including ridges complete all as specified. |
| 109 | S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in room covering/cladding to wall, including ridge cover fixed with self tapping screws etc all as specifed. |
| 110 | S&F of pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in room covering/cladding to wall, including ridge cover fixed with self tapping screws etc all as specifed. |
| 111 | S&F 2mm thick Colored Fibre glass reinforced translucent corrugated/plain sheeting fixed with coach screw and washer in roof, wall etc wall fixing with self tapping screw as specified and directed |
| 112 | Dismantling wrought iron or mild steel work of any description |
| 113 | S&F framed work as in doors or gates of angle or other section with gussset plates, rails, braces etc complete drilled for fixing steel sheetings or other coverings. Doors etc to be prepared for hanging or sliding with and including either hooks or hinges steel hanging door fittings ( exclusive of steel sheeting or other coverings running rails and guides) and hanging also fastening and fixing complete quality conforming to Fe-290W (Gde E-265) quality B complete all as specified. |
| 114 | M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified. |
| 115 | S&F mild steel rolled/tubular sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters , fixed with angle cleats or other connecting plates etc. conforming to Grade Fe 410W(Gde E-265 quality `B’ all as specified and directed. |
| 116 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover filltets complete all as specified |
| 117 | M & l for providing and fixing of E-board 600 x 600 x 4mm thick white prelaminated sett embosed reinforced desigener (lake & HM as approved ceiling board/tiles at all height laid on Armstrong Hot dipped Galvanised imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work will comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc. |
| 118 | S&F 5 mm thick hollow PVC Wall panelling including PVC beading at corner and top of any design, fixed on wall as per manufacture instruction complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender