Tender For Special Repair To Bldg No 56/07 - 56/12 (Ors Md Accn) At Zozila Line Under Ge (Central) Pune
Tender Value
43.14 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
17 days left
EMD
86300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No 56/07 - 56/12 (Ors Md Accn) At Zozila Line Under Ge (Central) Pune
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each with and including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc 1.50 Sqm but not exc 4 Sqm each with and including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed. |
| 3 | S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.Note :- Rates quoted deemed to include S&F of 100mm mild steel medium wt butt hinges(min 06 nos in each frame) |
| 4 | S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.Note :- Rates quoted deemed to include S&F of 100mm mild steel medium wt butt hinges(min 03 nos in each frame) |
| 5 | M&L PCC 1:3;6 type C1 (using 20mm graded crushed stone aggregate) as in steel chowkhats, hold fasts and bed blocks etc including necessary form work complete all as specified and directed. |
| 6 | S&F 35 mm thick flush shutters, solid core onstruction, with particle board core and plywood face panels, commercial type on both sides, both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed |
| 7 | Supply and fixing (factory Made) 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (With sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified. |
| 8 | S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated wood grain printed PVC sheet in lieu of plain colour to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 176 of SSR 2020 part II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. Each PVC door shutter leaf consist of 3 Nos 100 mm long stainless steel butt hinges. complete all as specified and directed. |
| 9 | S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2020 Part II complete all as specified and directed. |
| 10 | S&F anodised powder coated window and ventilator shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/M inclusive of 4.8mm thick selected quality glass for glazing with rubber neoprene packing, stainless wire cloth of wire 0.71mm dia and 1.18mm width of aperture, aluminium handle / handle slot, locking arrangement etc complete all as specified and directed |
| 11 | S&F anodised powder coated ventiator with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M complete all as specified and as directed |
| 12 | S&F extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 13 | S&F 150mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 14 | S&F 150mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed. |
| 15 | S&F in repairs (Curtain rod/drapery rod), 20mm dia, stainless steel with and including fency type stainless bracket / wall to wall / side 02 Nos of each opening and stainless steel side stopper fency type of required shape and size 2 Nos of each opening complete all as specified and directed. |
| 16 | S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed Aluminium (extruded section body) complete all as specified and directed |
| 17 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 18 | S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, water tank staging,door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc. |
| 19 | M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 20 | M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 21 | Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) un-reinforced cleaning the premises and removal of rubbish out side the MD land at the location notified complete all as specified and directed. |
| 22 | Demolition of brick work / Stone masonary / PCC block masonary build in cement morter of any description and removing of rubbish from the premices. |
| 23 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified |
| 24 | Demolition/Breaking up Drain Pipes (SGSW), AC/RCC 150 mm to 200 mm dia, Jointed in Cement Mortar of any description including demolition of PCC of the Pipes with Bed, complete all as specified and directed by Engineer-in-Charge. |
| 25 | M&L for reinforced cement concrete pipe 200 mm dia class NP2 laid and jointed complete with collars as in sewar lines and jointed complete all as specified and as directed by Engr-in-charge. |
| 26 | M&L for Cement Concrete (1:3:6) Type C1 (20mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 200 mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed. |
| 27 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, benching, bed block for rungs, window cills etc complete all as specified and directed by Engr-in-charge |
| 28 | M&L for TMT bar 8mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement (@ 150MM c/c both ways) complete |
| 29 | M&L for cement concrete type B1 1:2:4 (using 20mm graded stone aggregates) in precast cover slabs for manholes cover and similar articles with plain faces etc set in cement mortar 1:4 including use and waste of formwork complete |
| 30 | M&L for precast concrete solid block masonry exc 10cm width with solid block of PCC (1:5:8) Gde C-5 and setting in CM 1:6 complete all as specified and directed. |
| 31 | M&L for PCC type B1 1:2:4 (using 20mm graded aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete |
| 32 | M&L for Cement concrete type C2 1:3:6 (using 40mm graded stone aggregates) in foundations, filling and mass concrete complete |
| 33 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 34 | M&L for 75mm thick (1:3:6) Type-C2 (using 40mm graded crushed stone aggregate) as in plinth protection / path finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 35 | M&L for plain cement concrete (1:4:8) Type-D2 (using 40mm graded crushed stone aggregate) as in levelling course / sub base of flooring complete all as specified and directed. |
| 36 | M & L non skid ceramic coloured tiles 600X600 7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed of CM 1:6 complete. |
| 37 | .Ditto but in skirting over and including 10mm thick backing coat in CM 1:3 complete all as specified and directed. |
| 38 | M&L for coloured glazed ceramic tiles in vertical surface 300X 450X 7 mm/300x600x7mm/ 450x 600 x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of CM 1:3 complete all as specified. |
| 39 | M&L for rubber moulded glossy chequered cement concrete coloured tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 40 | Taking down plastering on lathing (other than wire-netting), without removing lathing, but in cement lime or cement mortar (ditto). |
| 41 | M&L rendering 15mm thick on stone masonary surfaces other than fair faces of brick surfaces work or stone surfaces in CM 1:6 finished even and smooth without using extra cement |
| 42 | M&L rendering 15mm thick in CM 1:4 on brick /stone surfaces finished even and smooth without using extra cement |
| 43 | M&L for preparation newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer of same make over external wall surfaces complete all as specified and directed. |
| 44 | M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make over 1mm thick wall care putty complete all as specified and directed. |
| 45 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 46 | M&L for 8 mm thick one side laminated gypsum ceiling board for false ceiling of size 600 x600x mm on GI powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 2-3 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, complete all as directed and specified |
| 47 | Dismantling of single layer manglore pattern tiles and ridge in roofing /AC sheet/GI Sheet roofing complete all as specified and directed. |
| 48 | Dismantling of battens for tiles, shingles etc, of any size and description spaced exc 15cm including tilting fillets complete all as specified and as directed. |
| 49 | Dismantling timber scantling of size 10 Sqcm and over in section as in unframed work complete all as specified and directed. |
| 50 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa with AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 51 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa with AZ 150 as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws complete all as specified and directed. |
| 52 | M&L for MS structural steel work framed as in trusses, purlins,rafters post etc conforming to grade E-250 (Fe-410W quality \\"A\\") including shaped washers including necessary clits required length,notching,drilling ,reveting and or welding of connecting with nut bolts with angle ,cleat,fish plat,gusset plate and also erecting in true position complete all as specified and directed. |
| 53 | Taking up or down 15mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed. |
| 54 | Taking up or down 20mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed. |
| 55 | S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement complete all as specified and directed. |
| 56 | S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed. |
| 57 | Dismantling water tank of capacity exceeding 250 liters but not excedding 500 Ltrs complete all as specified and directed. |
| 58 | S&F rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 59 | Supply and fixed in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 60 | S&F in repair vitreous china pedestal pattern water closet white with including cast iron 'P' or 'S' trap, matching sheet cover and wall hung cistern with drainage pipe and connection to trap seat cover and . including making good to floor, complete all as specified. Make Jaquar cat part no: CNS-WHT-851 or Techno commercial equivalent model in Make mentioned in PS. |
| 61 | Supply and fixing in repair 600mm X 450mm bevelled edge mirror of selected quality mounted on plastic frame covered back with commercial and fixed on wooden plug with chromium plated brass screws and cup washer complete all as specified. |
| 62 | S&F in repair 15mm bore chromium plated bib cock fancy type. Make Jaquar cat part no:FLR-5047N or equivalent model in Make mentioned in PS |
| 63 | S&F in repair 15mm bore chromium plated angle cock fancy type.Make Jaquar cat part no:FLR-5053N or equivalent model in Make mentioned in PS |
| 64 | S&F in repair Brass CP wall mixer for mixing hot & cold water with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange and fixed.Make Jaquar cat part no:FLR-5281N or equivalent model in Make mentioned in PS |
| 65 | S&F in repair brass chromium plated overhead shower 100mm round shape single flow with rubit cleaining system fitted to steel pipe or union complete.Make Jaquar cat part no:OHS-1989 or equivalent model in Make mentioned in PS |
| 66 | S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed. |
| 67 | S&F in repair 15mm bore chromium plated pillar cock fancy type.Make Jaquar cat part no:FLR-5015 or equivalent model in Make mentioned in PS |
| 68 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified. Make Jaquar cat part no:ALD-CHR-577 or Techno commercial equivalent model in Make mentioned in PS |
| 69 | S&F in repair for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.Make Jaquar cat part no:CAN-1171 N or Techno commercial equivalent model in Make mentioned in PS |
| 70 | Supply and fixed in repair 20mm bore PVC brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as directed |
| 71 | Supply and fixed in repair 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete |
| 72 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of pre-painted cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore PTMT waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified. Make Jaquar cat part no:CNS -WHT-801 or Techno commercial equivalent model in Make mentioned in PS |
| 73 | S&F in repairs chromium plated soap dish approximate size 160x 160x9 complete all as specified and directed.Make Jaquar cat part no:AKP-35731P or Techno commercial equivalent model in Make mentioned in PS |
| 74 | S&F in repair tubular towel rail, 20mm dia, D type, 60cm longv between flanges Make Jaquar cat part no:AKP-35711PS or Techno commercial equivalent model in Make mentioned in PS |
| 75 | S&F Kitchen rack (Overall size 24x24x10”) complete all as specified and directed. Make : Cat No. P-310 of Prayag or equivalent |
| 76 | S&F in repair grating doom 100mm dia of PTMT (Minimum weight 25gms) |
| 77 | Dismantling cast iron work of any de scription and in any position |
| 78 | S& F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 79 | All as per item No 78 but 75mm bore |
| 80 | S& F 110mm PVC(SWR) (any radius),diminishing pieces or tapers(larger bore measured) fitted withoval access door |
| 81 | All as per item No 80 - but 75 mm bore |
| 82 | S&F 110mm PVC (SWR) bands/tranch piece double Y equal or unequal complete all as specifed and directed. |
| 83 | S&F 75mm PVC (SWR)bands /tranch piece double Y equal or unequal complete all as specifed and directed. |
| 84 | S&F PVC(SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed. |
| 85 | S&F PVC (SWR) gully trap 150x100 square or round mouth,type P incl jointing to waste pipe fixed in cement cncrete type B1 (1:2:4) complete all as directed |
| 86 | S&F PVC (SWR) cowl 75/100mmdia as required complete |
| 87 | S&F 110mm bore PVC (SWR) junction double,(double T).equal or unequal with access door complete. |
| 88 | S&F PVC (SWR) Coupler 75/110mm dia bore complete. |
| 89 | M&L 20mm thick granite (of any type) work table rubbed and pre polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite including dismantling complete and ensure best adhesion to surface complete |
| 90 | M&L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face including dismantling complete all as directed and specified |
| 91 | M & L Non - skid ceramic coloured tiles,size 300x300x 7 mm thick laid on floor , over and including 15mm thick screed bed in cement slurry and pointed in white cement with pigment to match the shade of the tiles, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 92 | M & L Non - skid ceramic coloured tiles,size 300x300x 7 mm thick laid on floor , over and including 15mm thick screed bed in cement slurry and pointed in white cement with pigment to match the shade of the tiles, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender