Tender For special Repair To Rvc Galaxy Offrs Mess Main Bldg/ Single Offrs Accn Under Ge (Central) Delhi Cantt-10
Tender Value
48.48 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
18 days left
EMD
96960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Rvc Galaxy Offrs Mess Main Bldg/ Single Offrs Accn Under Ge (Central) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubbing down with water etc incl remove all debris in 2 KM form site complete all as specified and directed. |
| 2 | M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces firnished even and smooth without using extra cement up to hieght of four storey bldg ,including scaffolding complete all as specified and directed by Engineer-in-charge.. |
| 3 | M&L Rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified. |
| 4 | M&L Rendering 5 mm thick in CM 1:3 on ceiling concrete surfaces finished even and fair without using extra cement complete all as specified. |
| 5 | M&L preparation of new plaster surfaces of wall and applying water proof wall care putty 1 mm thickness over plaster surfaces to prepare the surfaces even and smooth and finishing walls with acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer @ applied @ 2.20 Kg/10Sqm) complete all as specified as directed by Engr-in-charge. |
| 6 | M&L for Preparation of new surfaces (Plastered or un-plastered with 1mm thick putty) of walls and applying two coats of oil bound distemper complete all as specified. |
| 7 | M&L for Preparation of new surfaces (Plastered or un-plastered) of ceiling and applying two coats of oil bound distemper over one coat of 1mm thick wall care putty complete all as specified. |
| 8 | Complelte removal of existing old treatment on surface of walls with machenical grinder (machine) as per specification of manufacturer paints/OBDs over applying 1mm thick putty over applying a coat of alkali resistant primer and applying two coat of oil bond distemper on wall with roller brish complete all as specified and directed. |
| 9 | M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing tretament, by rubbing brooming down, washing with water etcand providing and applying 1 mm thickness putty over plastered surfaces to prepare the surface even and smooth and finishing walls with acrylic smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer @ applied @ 2.20 Kg/10Sqm) complete all as specified as directed by Engr-in-charge. |
| 10 | Demolition of brick work built in cement or cement lime mortar of any description including quoins,arches,pillars,etc., all as directed. |
| 11 | M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks, old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed. |
| 12 | Demolition of reinforced cement concrete such as chajja,manhole cover water tank parapet wall ,lintel up to 4.5 m span including hieght upto eight storey building , in any position all as specified and as directed by Engineer -in-Charge. |
| 13 | M&L for RCC concrete Nominal Mix (1:1:2) for Beams, cantilevers, lintels, columns pillars,water tanks, slabs, balconies, canopies, deck slabs including form work etc. or in similar articles upto 9th floor level complete all as specified and directed. |
| 14 | Dismantling wrought iron or mild steel work of any description such as guard bars, grills etc. |
| 15 | S&F Fe-410- W(Gde-E-250) quality-B framed work framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work with gusset of angle or other section with gusset plates, rails, braces rafter purlin post, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening with fastner and fixing complete, Note :- frame provide over chhajja upto G+8 storey building using scaffolding . |
| 16 | Expanded metal n. exc.4kg/sqm, cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members. |
| 17 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Note :- steel sheet , provide over chhajja upto G+8 storey building using scaffolding . |
| 18 | Demolition Bricks (laid flat or on edge) or brick tiles in floors, roof, channels, kerbs, aprons, etc. (each layer all as specified and directed. |
| 19 | Demolition Mud in roofs, any thickness, including plastering and lapping (whether full thickness removed or only a part thereof) all as specified and directed. |
| 20 | Removing soil excavated material exc. 1.5Km but n exc 5km and depositing where directed at above the starting point all as specified and directed. |
| 21 | M&L for cement concrete 1:2:4 type B1 (using 12.5mm graded stone aggregate) on roof padding surface finished even and smooth without using extra cement complete all as spd & directed. |
| 22 | M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified land as directed.Note: The application shall be executed on any type of surface and on horizontal/Vertical areas. |
| 23 | M&L providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary [coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge.Notes: For items ser No 22 & 23 (1) The work shall be executed through authorised applicator of manufacturer only.(2) Authrised Applicator shall be approved by GE before starting of work.(3) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material.Engineer-in-Charge shall deface the original purchase vouchers.(4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor's dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer. |
| 24 | M & L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint all as specified and directed by Engr-in-charge |
| 25 | M&L for rotational moulded polyethylene water storage tanks white colour 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball including taking out existing unserviceable overhead tank of any description including fitting and fixtures and dis connecting of existing water tank complete all as specified. (ISI Marked) |
| 26 | Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) |
| 27 | Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) |
| 28 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 29 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 30 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (max toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 31 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed.Note: MTC and Screw Out Test will be provided by Contractor” |
| 32 | Supply and fixing 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of density 650 kg/cbm manufactured by an ISO-9001-2015 certified company. Door to be panelled with SS mosquito and XTN aluminium mesh for additional strength and safety purpose (confirming as per IS 4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19x6mm size steel screws, etc. complete all as specified& directed.”Note: MTC and Screw Out Test will be provided by Contractor (b) SS butt hinges paid by saprately. |
| 33 | M&L aluminium alloy powder coated windows including aluminium coated frames silding track, bottom weighing not less than 1.015 Kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/ 2 Nos of shutter one wire mesh and one is glazed shutter silding type with aluminium sectins as per series-A (15mm) of jindal section number for silding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrngement spring action and glazing clips joint cleats rubber gaskets etc inclding provision of 4 mm thick tinted frosted glass of superior quality and stainless steel jail including all standard fittings with aluminium grill of hole window complete all as specified and directed NOTE:- For installation of windows AC/desert cooler the provn of window glass shutter with wire mesh,grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirementt during execution as direction of Engg-In-Charge. |
| 34 | S & F for ventilator outer frame 40mmx40mm with 1.3mm thickness, corner 45 degre cut & aluminum welded center mullion size 40mmx65mm also welded , fixed 5mm frosted glass EPDM rubber gasket with provision for fresh air fan, full system powder coating with pure polister coat of any shade install with SS screw rol plug pvc & silicone |
| 35 | Dismantling of wall and ceiling/cup board board fibre pulp AC boards etc any thickness including cover fillets removing the wiring |
| 36 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) HDMR Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws with SS 100mm handle with piano hinges and magnet required. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 37 | S&F in repair 20 mm nominal dia and minimum thickness 1.2mm of SS-304 Grade of Stainless Steel tube for curtain rod including pair of suitable S.S brackets latto wall to wall etc approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed. |
| 38 | S&F SS butt hinges medium weight 100mm size fixed with SS screws (ISI Marked) |
| 39 | S&F SS barrel tower bolt extruded section 150mm long and fixed with SS Screws (ISI Marked) |
| 40 | S&F 150mm extruded SS handle fabricated type and fixed with SS Screws(ISI Marked). |
| 41 | S&F 300mm extruded section SS sliding door bolt with hasp and staple and fixing bolt and nut (ISI Marked) |
| 42 | S&F for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar all as directed. |
| 43 | Supply&fix in repairs two legged aluminium floor door stopper with rubber shoe 140mm long complerte all as specified and directed by Engineer-in-Charge. |
| 44 | S&F for stainless steel plate rack of size 60x60x20 cm depth size made out of 1mm thick sheet complerte all as specified and directed by Engineer-in-Charge. |
| 45 | S&F in repair stainless steel sink made out of 1mm thick sheet for kitchen with plug, washers, waste pipe, waste coupling incl fixing cast iron cantilever bracket connecting union over all size 495x420mm with bowl size410x330x160mm complete all as specified and directed by Engineer-in-Charge. |
| 46 | Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store and S&F 15mm GI tubes, medicum grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.' |
| 47 | Supply & fixing steel water tubes of size 15mm bore (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors/ concealed in walls complete, all as specified & directed by Engineer-in-charge. |
| 48 | Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store and S&F 15mm GI tubes, medicum grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.' |
| 49 | S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified. |
| 50 | S&F in repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed. |
| 51 | S&F in repairs Brass chromium plated mode 2 in 1 WHB mixture model Quarter half turn (SOLO) of as complete all as specified & directed. |
| 52 | S&F in repairs brass chromium plated mode 3 in 1 wall mixture model Quarter half turn (SOLO) as all specified and as directed. |
| 53 | S&F in repairs Brass chromium plated mode 2 in 1 sink mixture model Quarter half turn (SOLO) of as complete all as specified & directed. |
| 54 | Supply & fixing in repairs vitreous china wash basin, white, flat back of size 550mm x 400mm with full Pedestal including 32mm dia PVC flush pipe and pvc connection pipe with coupling and set of brackets incl complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F in repair Vitreous china wash down water closet EWC white/ ivory/off white with water closet seat cover (closedpattern incl all necessary accessories like rag bolts/ gel gasket , P Or S trap etc. (excluding ushpipe) complete in all respect all asspecified. |
| 56 | Supply & fixing in repairs 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, PVC connection 450mm long including brackets and 32mm dia flush pipe complete all as specified and directed by Engineer-in-Charge. |
| 57 | S & F in repairs 15 mm dia 600mm long PVC connections with brass check nut complete all as specified. |
| 58 | S & F in repairs Glass Corner Shelf 6mm thick including CP railing radius 250mm complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F in repairs Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F in repairs Health faucet, CP brass with 1.50m long flexible pipe complete all as specified and directed by Engineer-in-Charge. |
| 61 | S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Make-Jaquar/marc/Kohlar, complete all as specified |
| 62 | S&F for 20 mm bore gate valve, gun metal, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed. |
| 63 | S & F in repairs Chromium plated brass overhead shower rose 125 mm with arm complete all as specified and directed. |
| 64 | S&F in repairs looking mirror of size 600mmx450mmx5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. Make- Atul/Swastik/Hindustan safety glass works Pvt Ltd. |
| 65 | S&F in repairs chromium plated soap dish fancy type all directed. complete all as directed |
| 66 | S & F in repair towel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embedded in cement mortar 1:3 with MS screws etc complete all as specified and directed. |
| 67 | S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified. |
| 68 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 69 | S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and trenches complete all as specified and directed. |
| 70 | All as of above item but of 75mm dia complete all as specified and directed. |
| 71 | S & F bends 110mm dia PVC (SWR) bends complete all as specified |
| 72 | S & F bends 75mm dia PVC (SWR) bends complete all as specified |
| 73 | S & F 110 mm dia size,PVC (SWR) P trap complete all as specified and directed |
| 74 | S & F 110mm dia PVC (SWR) junction single,(Single T) equal or unequal with oval acces door complete alla as specified and directed. |
| 75 | S & F 75mm dia PVC (SWR) junction single,(Single T) equal or unequal with oval access door complete all as specified and directed. |
| 76 | S&F 100mm dia stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay including boltstand nuts seuring ends of stays to wall complete all as . |
| 77 | Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed. |
| 78 | M&L Glazed ceramic coloured tiles (600X300mm) x 6-7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match the shade of tile over 10mm thick rendering of in cement mortar 1:4. |
| 79 | M&L for non skid ceramic coloured tiles 6 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors over 15mm thick screed bed in cement mortar 1:4 set and jointed in neat cement slurry and pointed in coloured cement. all as specified and directed |
| 80 | M&L Vitrified ceramic Light shade coloured tiles 10mm thick square/rectungular polished area of each tile not exceeding o.36 Sqm in floor etc set and jointed in neat cement sluarg and painted in white or coloured cement to match laid over 15mm thick screed bed of cm 1:6 . |
| 81 | Ditto as item No 9 above but as in skirting over rendering 10mm thick in cement mortar 1:4. |
| 82 | M & L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) in floor,steps,jambs,pillars, window-cills, cooking platforms with necessary hole for gas pipe where ever required and likes on cement mortar bedding of 20 mm in CM 1:4 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed. |
| 83 | M&L for machine cut kota stone slab flooring, and as in tread, riser, landing, 20-25 mm thick over cement screed bed 20mm thick with CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Please Enable Macros to View BoQ information |
| 84 | M&L for machine cut kota stone slab flooring, and as in tread, riser, landing, 20-25 mm thick over cement screed bed 20mm thick with CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender