Tender For Repairs To Roads And Repairs/Replacment Of Road Furniture At New Mil Station Kapurthala Under Ge Kapurthala.
Tender Value
1.15 Crore
Estimated cost
Bid Submission
24 Sep 2026
6 days left
EMD
1.84 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Roads And Repairs/Replacment Of Road Furniture At New Mil Station Kapurthala Under Ge Kapurthala.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for prearing existing black top surfaces with wire brushes for removing cake, mud etc sweeping with brooms and finally fanny the cleaned surfaces with gunny bags/air compressor to remove all losse dirt and applying evenly a priming/tack coat with paving bitumen VG-10/ cold emulsion at the rate of 5 kg per 10 sqm on road surfaces. Laying rolling, consoliding, 30mm thickness of bitumen premixed semi dense ashphaltic concrete with 5.5% binder content of bitumen grade VG-30 by weight of total mix laid with mechanical paver,roller and completed to required camber gradient with pressure roller and 8 to 10 tonne power roller and be achieved a uniform smooth pneumatic roller complete all as specified and directed by Engr-in-charge. |
| 2 | M&L Repairs to pot holes any depth n.exc 1 Sqm each including sweeping free from dust and mud water scoring sunken surfaces in roads, paths, etc. cutting round edges to at least 25 mm in depth and making good by filling in screened and graded road metal watering and well ramming (incl supply of metal) and making good by applying tack coat @ 5 kg per 10 Sq.m, putting in pre mix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with sand seal coat (6.8 kg of binder with 0.06 cum of sand) again well rammed (including supply of pre mix binder and sand) depth of pot holes not exc 30mm and using paving bitumen VG-10 all as specified and directed. |
| 3 | M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.Applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre laying Premix bituminous, macadam 50mm thick using paving Bitumen (VG-30) by weight with 4% of binder contents laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less), roller and completed to required camber gradient with pressure roller and 8 to 10 tonne power roller and be achieved a uniform smooth pneumatic roller complete all as specified and directed by Engr-in-charge.all as specified and directed by Engr-in-charge. |
| 4 | M & L for preparing bituminous surfaces of road and marking 2.00 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 5 | S&F in repairs cat eye solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA strips lens with reflector fixed with and including MS Stud of suitable size as per manufacruers instruction. Note :- As per list of makes or as approved by GE. |
| 6 | Supply and fix in repair solar cat eye alumnium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 1,000 to 18,000 mcd completed as per manufacturers instructions etc all as specified and directed. Make: 3M/Green lite/Tata BP |
| 7 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 8 | M&L for Cement concrete(1:4:8) type D-2 (using 40mm graded crushed stone agg) as in foundation, filling and mass mass concrete complete all as specified and directed by Engr-in-charge. |
| 9 | M&L for 25mm fines Sand filling under floors or in foundations including watering and consolidation. |
| 10 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade. |
| 11 | M&L for Pre-cast cement concrete block masonry with solid blocks(30x20x10cm) as in edging type B-1 1:2:4 (20mm graded agg) , exc. 10 cm in width and setting in mortar, complete all as specified and directed by Engr-in-charge. |
| 12 | Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 13 | S&F in repairs ABS plastic speedbump/speed breaker in parabolic convex shape and of size 730mmx245mmx70mm made out of steady plastic, dovetail interlocking sub units, jointed and fixed to make the bump perfectly uniform, bump made out of precoloured material (black/yellow) and UV stabilisers to keep them perfectly colourful, studded with reflectors on either side to make it clearly visible to motorist during night hours, including PCC (1:2:4 type B1) filling in speed breakers, complete all as specified and as directed. |
| 14 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender