Tender For Providing Furniture Arrangements For The Work Of Construction Of Additional Civil Block Building In Government College Of Engineering C Us At Tirunelveli.
Tender Value
7 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
16 days left
EMD
7000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Furniture Arrangements For The Work Of Construction Of Additional Civil Block Building In Government College Of Engineering C Us At Tirunelveli.
BOQ
| Sl. No. | Item Description |
| 1 | Fabricating Supplying and fixing in position of Aluminium anodised Powder Coated colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/ m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be got approved by Executive Engineer before use. |
| 2 | Fabricating Supplying and fixing in position of Aluminium anodised Powder Coated of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: [email protected] kg/m and Bottom rail: 100x44.45x2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m,Alu.Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Eachs., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers.. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete. Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge. |
| 3 | Without Automatic Door closure and Pivot but with hinges |
| 4 | WithAutomatic Door closure and hinges |
| 5 | Towards the charges for repairing the country wooden drawing table, the work involves tightening of all legs and cross beams with nails and screws.The work involves cleaning out old, dried glue and applying of fresh wood glue and using heavy duty clamps pieces for fixing tightly if necessary. The pieces had tobe held tightly together for atleast 24 hours until the gum sets. The damaged plywoods has tobe replaced with good quality matching plywood 9 mm thick. The shallow scratches in working Table has tobe puffed with machines to conceal the light abrasions and the deep scratches noticed has tobe filled using wax filler stick to fill the holes. Finishing the surfaces by applying clear durable protective look like lacquer or polyurethane polishing to prevent future stains and moisture damage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 6 | FRP door Sutter with FRP door frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and solid core FRP shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., complete complying with standard specifications and as directed by the departmental officers. |
| 7 | Painting the wall with Texture Finish Paint including labour charges etc., complete complying with standard specifications and as directed by the departmental officers. |
| 8 | Providing Computer work table arrangements of size 0.60m(b) x 0.75m (h) using 17mm thick prelaminated particel board inclusive of prelaminated particle board key board tray and CPU Storage arrangements as directed by the departmentel officers. The rate including transportation charges and excluding GST etc., Complete complying with standard specification and as directesd by the departmental officer. |
| 9 | Supplying of Computer Fabric Push back revolving chair with Seat and back and Nylon Casters Wheels. Pneumatic 5-inch-seat height adjustment type. The Computer Chair size 44 D x 59.5W x 106H including transportation charges and excluding GST etc, Complete complying with standard specification and as directed by the departmental officer. |
| 10 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender