Tender For Emergent Restoration Of 02 Nos H/R Gate & Other Allied Works At Tatko(I) Scheme.
Tender Value
2.96 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
0 days left
EMD
5926
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purulia → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Emergent Restoration Of 02 Nos H/R Gate & Other Allied Works At Tatko(I) Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg) |
| 2 | Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of Engr-in-charge (cost is excluding the cost of any types of filling materials) |
| 3 | Dumping in position earth / sand filled gunny / poly bags (capacity 50kg) within a lead of 30 metre inclusive of all lifts |
| 4 | Placing / laying, stone / brick aggregates filled gunny / poly bags on the slope of the bank of the river / sea or the slope of the embankment or in the river bed with all leads etc. complete. |
| 5 | Bailing out water by pump including all leads and lifts and including making all arrangements for disposal, where continuous flow or seepage of water is encountered and rating of pumps and hours of operation is specifically ascertained as per direction of the Engineer-in-charge. |
| 6 | Earthwork in excavation in the canals / drainage channels / borrow pits /River bed / slope of bank as noted below as per designed section &throwing the spoils in layers of 25 cm. for making banks as per profile or to deposit the same in any other place within an initial lead of 30 metre and initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per direction of the Engineer-in-charge. (a) Ordinary soil / local soil / soil mixed with moorum or kankar / silt, dry or moist / slushy silt / sticky soil. |
| 7 | Taking out wind-tie from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within the compound and stacking. |
| 8 | Fixing old wind-tie with new fittings including painting. |
| 9 | Taking out old existing unserviceable damaged gate shutter of canal/river completely after disengaging from hoisting system completelyfor installation of new gate shutter. The work includes cutting of gates into suitable pieces by gas cutting,removing the same by mechanical means or suitable crane, stacking all the pieces at the suitable placeor as directed by the Engineer in charge up to a lead of 1000m.The cost includes cost of manpower employed for dismantling andcost of consumables like oxygen, acetylene gas, welding rod, hire charges of machineries, like chain pulley block, gas set, grinding machine,welding set,tools&tackles,scaffolding and safety equipment’s etc. including carriage loading & unloading. The cost ofcomplete dismantling of hoisting system & cost of old unserviceable materials handed over to departmental go down including loading & unloading will be provided extra.a)Gateshuteersizeupto4.00 sq.m |
| 10 | Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Canal/River as per IS: 5620 - 2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, ligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting). i.) Width of Gate shuteer size upto 2 metre. |
| 11 | Supply fitting Fixing of ss (AISI 304) bolts, nut & washer i) Dia above 20 mm |
| 12 | Supplying, fitting & fixing of screw rod having square thread of 1.5/2 T.P.I, Material bright steel [EN-8/EN9/forged Cl-4 (45C8) as per IS :1875 1992/latest Revision]. dia and thread length as required and providing with a drilled hole of required dia on the other end after flattened and supplying with one no. bolt and nut of required size and all other components as required as per direction of Engineer-in- Charge. The cost includes cost of material, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles, grease, mobil etc including carriagebloading & unloading as per direction of Engineer in charge.b) upto length above 3metre upto 5 metre. |
| 13 | Supplying, fitting & fixing of M.S fabricated pedestal stool of suitable size, consisting of bottom plate, top plate, four nos legs etc febricated with suitable sizes m.s plate, m.s angle conforming to I.S 2062 of latest revision and as per approved drawing & direction of Engineer in charge. The cost includes cost of materials, man power employed for dismantling and fitting fixing, civil works consumables like cutting tools, gas, oxygen, welding rod, anchor bolt of required size, hire charges of machineries, like gas cutting set, welding set, tools & tackles etc including carriage loading & unloading. |
| 14 | Supplying, fifling & fixing Gun Metal Nut as per requirement having 1.5/2 T.P.I square thread for screw gearing arrangement, perfectly metting with the screw rod/gear rod for lifting the draw shutter as per direction of E.I.C. The cost includes cost of materials, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles etc including carriage loading & unloading. |
| 15 | Supplying and fitting fixing of heavy duty thrust bearing Koyo make/same standard with the hoisting assembly incl. all cost as required to complete the job as per direction of EIC. (dia. = 65mm ) |
| 16 | Supplying, fitting & fixing of screw hoisting arrangement made of MS bottom plate, top plate, collar with necessary holes on base plate and top plate to accommodate thrust bearing of suitable size as per approved drawing & design and as per direction of Engineer in charge. The cost includes cost of ms plate as per IS : 2062 -2011/ latest revision, man power employed for dismantling and fitting fixing, consumables like cutting tools, bolt & nuts of required size, hire charges of machineries, like lathe/shaping machine, grinding machine, drilling machine, tools & tackles etc including carriage loading & unloading but excluding the cost of lifting Nut/Bush, thrust bearing & wheel supplied separately. |
| 17 | Supplying, fitting & fixing of M.S wheel in the screw hoisting system for lifting or lowering the draw shutter.The wheel consisting of suitable size hub to accomodate any size of G.M/C.I nut, rim dia 32mm and four nos arm made of minor dia 30mm. & major dia 36mm rod complete or as per approved drawing & direction of the Engineer-in-charge.The cost includes cost of materials, man power employed for dismantling and fitting fixing, consumables like cutting tools, welding rod, hire charges of machineries, like lathe machine, grinding machine, tools & tackles etc including carriage loading & unloading. (a) Upto 60 cm. dia. M.S wheel |
| 18 | Surface cleaning of metal surfaces by chemical cleaners and then by hand with emary paper, wire brush and power tool cleaners and removing dust and preparation o f surface including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts. |
| 19 | Painting of embedded parts, all types of gates, stoplogs and barscreen/gratings etc on prepared surfaces with one coat of inorganic zinc silicate primer (airless s p r a y preferred)70+/ - 5 micron and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns) including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. |
| 20 | Painting hoist structural components, tressle bridge ,crane, lifting beam, cat work bridge and other similar structure on prepared surfaces with two coats of zinc phosphate primer (airless spray preferred) 40 microns/coat and followed by two coats of synthetic enamel paint 25 microns/coat including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. |
| 21 | Removing earth/sand filled poly bags/gunny bags from the channel bed/slope and initially depositing the same near channel bank at a place as directed by the Engineer-in Charge for measurement of Bag.& then disposing off the same at a distance not less than 150metre from the channel site. |
| 22 | Dismantling rope drum hoisting system completely of Dam/ Barrage gate, consisting of geared motor/motor, gear box, manual operating system, chain & sprocket, couplings, braking arrangement, power transmission shafts, spur gears, rope drum, rope, rope clamps, trunion etc part by part for repairing/replacement of gates and staking suitable place upto lead of 500 metre or as per direction of E.I.C. The cost includes cost of man power employed for dismantling of hoisting system, hire charges of mechanical devices for hanging the gate properly for repairing works, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading.a) Width of Gate shuteer size upto 12 metre |
| 23 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries ,Manpower, Cutting, Machining, Aligning, Anchoring, Welding, Finishing, Consumables,Carriage and all overheads with all leads and lifts complete as per specification (without painting) vi) Rope Clamp(MS) |
| 24 | Supply & fitting fixing of round strand (steel core/fibre core) steelwire rope (ungalvanised, IWRC) of 6x36 construction of 1960 tensiledesignation as per IS-2266 (make: Usha Martin, Bharat Wire Ropesltd or BIS approved makes), rope clamp with Dishakle and fittingfixing of said material with correct alignment and position inclusiveof all cost of labour, T&P, scaffolding charges & all other incidentalcharges as necessary to complete the job in all respect upto the satisfaction of E.I.C.i) 20 mm dia (steel core) |
| 25 | Cost for supply & fitting fixing of new neoprene rubber seal as per IS-11855-1986 with M.S. Flat of size 50 mm. x 10 mm. , G.I. CS Bolts & Nuts with wahser of size dia = 1/2\\" L=2.5\\", araldite for rubber seal corner joint as required rubber seal as given below, the cost includes materials cost, welding & drilling cost, hire charges of T&P, transportation, man power etc. to complete the job at site as per direction of E.I.C. Cost for supply and fitting fixing of new neoprene rubber seal of solid bubble musical note type of size flat portion 100 mm. x 12 mm. bubble OD = 32mm, but excluding cost of MS plate,nut,bolts etc. |
| 26 | Supplying of M.S flat for clamping Rubber seal with hole as per direction of EIC |
| 27 | Supplying of M.S bolts with nut for clamping Rubber seal as per direction of EIC |
| 28 | Repairing/replacement/strengthening of damaged/heavily corroded portion of cross/horizontal/vertical steel members such as skin plates,stiffener girders, rope bracket, screw rod fixing bracket etc of spillway gates/H.R gates/canal gates and other similar MS member which includes dismantling of damaged portion of structural members and fabrication and finishing to the required shape & size as per direction. The Cost includes cost of Materials, Machinaries Manpower Cutting aligning, drilling, Welding, Finishing Consumables, Carriages and all over heads with all leads and lifts complete as per specification(with out painting). |
| 29 | Supplying of cage frame and installation of the same made by Suitable section and all hot deep galvanized cover MS and fastened by nuts and bolts and side covered with M.S round bar/Sq. bar with the structural members including lapping & setting by MS flat including cost of galvanized MS, cost of drill hole for fixing nuts&bolts, , cost of labour , hire charges of T&P, transportation cost etc to complete the job as per direction of EIC. by following materials: (This item may be used for repairing of existing damaged cage frame) a) Galvanized MS materials Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender