Tender For Renovation And Repairing Of Internal electrical installation Work For Flat_402 Special A Type Of Govt Rhe _ G 10_ Swyambhara, Saltlake Under Central Calcutta Electrical Section (Hd).
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Aug 2026
10 days left
EMD
3096
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Repairing Of Internal electrical installation Work For Flat_402 Special A Type Of Govt Rhe _ G 10_ Swyambhara, Saltlake Under Central Calcutta Electrical Section (Hd).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the existing wiring and mending good the damages as per G.S |
| 2 | Removal of dismantled rubbish,light, switch board etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal/Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge |
| 3 | Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment--2 Way |
| 4 | Supplying and fixing 240/415 V, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (make:ABB/Crabtree/Legrand).----6-32 A (Make: ABB/Legrand/Crabtree) for SPNDB. |
| 5 | 32A DP MCB (Make: ABB/Legrand/Crabtree) as a sub-main wire incommer. |
| 6 | Distn.wiring in22/0.3(1.5sqmm) single core stranded 'FR' PVC insulated unsheathed single core sranded copper wire (BrandapprovedbyEIC) in19 mm bore,3mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points withModular type switch (Brand approvedbyEIC) fixedonModularGIswitch boardwithtop cover plate flushed inwall incl.mendinggooddamages to original finish.(A) 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC Average run 8 mtr. |
| 7 | Distn.wiring in22/0.3(1.5sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in19 mm bore,3mm thick polythen pipe complete with all accessories embedded in wall to 240V 6A 5pin plug point incl.S&F240V6A3pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl.S & Fearth continuity wire, fixed on 4 Module GI switch board with3/4 Module top cover plate flushed in wall incl. mending good damages to original finish a) 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC (a) On Board Plug. |
| 8 | Cutting channel of 31 mm x 31 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works.-----13 mm dia 3 mm thick polythene pipe without earth continuity wire |
| 9 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make: Finolex /Havells/KEI/GLOSTER/R. R. Kabel/Polycab) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.---- 3 x 22/0.3 (1.5 sqmm) to 230V. 5/3 pin, 6 Amp. (Separate plug point) as per G.S. |
| 10 | 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) to 230 V, 15 Amp. (Power plug & Geyser points) as per G.S. |
| 11 | 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) to 230 V, 15 Amp. (For A.C) as per G.S. |
| 12 | 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC for sub-main as per GS. |
| 13 | Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl.making earthing attachment, painting and mending good damages to building works----- (a) 2 Module (For Geyser & A.C) |
| 14 | Supply & Fixing 240V 16A Piano key type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate andmaking necessary connections as required. (For Geyser & Power Plug) |
| 15 | Supply & Fixing 240V, 16A, 3 pin Modular type plug socket (Brand approved by EIC),without plug topand switch,on existing GI Modular type switch board with top cover plate and making necy. Connections with PVC Cu wire and earth continuity wire etc. (For Geyser, Power Plug & A.C) |
| 16 | Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. topcover flushed inwall for housing the board after cutting the brick wall incl.making earthing attachment, painting and mending good damages to building works ---- (a) 4 Module (For separate plug & power plug) |
| 17 | Supply&Fixing 240V6AModular typ eswitch (Brand approved by EIC) onexisting GI Modular type switch board having top cover plate and making necessary connections as required.(For separate plug) |
| 18 | Supply & Fixing 240V, 6A, 5 pin Modular typeplug socket (Brand approved by EIC),without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. Connections with PVC Cu wire and earth continuity wire etc.(For separate plug) |
| 19 | Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 20 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. makingnecy. connections etc. |
| 21 | Supply of Surface-Mounted WW/NW/CW 12 Watt LED downlight Luminaries in round profile Complete with all acessorioes (Make: Philips: Metal Full Glow Surface /CG/Orient )as per approval of EIC/Authority). |
| 22 | Supply of decorative Single Head LED Wall Light fitting (Make:-Philips :-Type:-Grace ,Model No-34303 or equivalent of CG/Wipro/Havells/Jaquar as per approval of EIC/Authority). |
| 23 | Supply of decorative Double Head LED Wall Light fitting (Make:-Philips :-Type:-Trendo ,Model No-34304 or equivalent of CG/Wipro/Havells/Jaquar as per approval of EIC/Authority). |
| 24 | Supply only of 10W Basin/Mirror light WW as direction of EIC. (Make- Philips ,Type:-Muziris,Model No.31402 /Crompton/Wipro) (for kichen & lobby) as per direction of EIC & as per choice of Authority. |
| 25 | Fixing only bulk head ceiling fitting on wall /ceiling by screws etc. |
| 26 | Supply of 9W LED lamp B22 / E27 WW/NW/CW (Make:Philips/Crompton/Wipro) as per approval of EIC/Authority. |
| 27 | Supply installation testing and commissioning of following capacity Geyser 5 Star Rated storage water heater with advanced 3 level safety --- for 10L capacity (Make:-HAVELLS: Monza Digi fabia /Crompton/PWD Approve) as per approval of EIC/Authority. |
| 28 | Supply of 4ft long 40 Watt LED Smart Bright Tube Light Fitting with LED Tube Light .(Make: Philips: Essential SmartBright Batten BN170C LED40S-6500 PSU L120/Crompton/Wipro as per approval of EIC/Authority. |
| 29 | Fixing only bulk head ceiling fitting on wall /ceiling by screws etc. |
| 30 | Supply of 220-240 V,50Hz, Modular Type Heavy duty Exhaust fan 200 mm sweep (Make : Havells (Ventil Air DX Off-White)/ CG/Orient) as per approval of EIC/Authority). |
| 31 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire andmaking connection for exhaust of following diameter:(a) 23 cm (9\\") |
| 32 | Supply of 1200mm sweep celling fan complete with blades, canopy, fork, rubber bush etc.(Make: Havells: EP Trendy ES (Antique Copper(FHCTR1SACU48)/Orient / CG). as per approval of EIC/Authority. |
| 33 | Supply of 450 mm sweep V3 Wall fan (Make: Havells: (Model: V3 Wall Silver Black) or Equivallent model of Orient/CG )as to GS and as per approval of EIC/Authority. |
| 34 | Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length. |
| 35 | (Rate should be quoted including all updated taxes and duties GST, LWC from Sl. no. 1 to 30) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender