Tender For Addition/Alteration To Smq No P-316 Of Hq Wac At Subroto Park
Tender Value
43.46 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
1 days left
EMD
86920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Smq No P-316 Of Hq Wac At Subroto Park
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Disconnection and restoration of PNG connection alongwith removal and refixing of PNG meter and necessary pipe line need to be essentially of SMQs wherever renovation/repair being under taken in kitchens complete all as specified and directed. Note :- PNG connection will be disconnected & reconnected by the authorized person of the PNG company and contractor will be fully responsible for any damage if occured during execution and the same will be repair by the contractor without any extra cost and no payment will be paid by the department. |
| 2 | Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15 cm thickness( below or above ground floor) complete all as specified and directed. |
| 3 | M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in sunken portion complete all as specified and as directed. |
| 4 | M & L for cleaning the sunken floor surfaces by wire brushes, brooming, removing dust by dismantling of floor, lime terracing and applying following :- (a) 10 mm thick screed bed in cement mortar 1:3 complete mixed inlcuding water proofing compound as per manufacturers instructions complete all as specified and directed. (b) Bitumen primer confirming to IS-3384-1965 @ 0.50 Kg Per sqm. (c) Applying a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm confirming to IS - 702-1998 for water proofing membrane. (d) Applying of polymeric water proofing membrane weight not less than 3 Kg/Sqm over entire are with overlaps and sealed all as specified directed. (e) Again applying a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm over water proofing membrane. (e) Dusting dry sand @ 0.75 Kg Per Sqm over water proofing membrane. |
| 5 | S&F in repair 32 mm dia galvanised iron spout light grade for sunken portion complete all specified and as directed. |
| 6 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) excluding flushing cistern and including P or S trap and flush pipe complete all as specified and as directed. |
| 7 | S&F plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed. |
| 8 | S&F in repair PVC flushing cistern, valveless, symphonic action type, 10 Ltr capacity, low level, white, with inlet, ball valve, float and handle including bracket complete all as specified and as directed. |
| 9 | Taking down cement plaster etc on brick wall or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and disposed off unserviceable materials to out side MOD land complete all as specified and as directed. |
| 10 | M&L 12 mm thick cement mortar 1:6 on unven surface of brick work or concrete surfaces on wall surface even and smooth without using any extra cement complete all as specified and directed. |
| 11 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling complete all as specified and as directed. |
| 12 | M&L 15 mm thick cement mortar 1:4 on other than fair faces of brick work or concrete surfaces on wall surface even and smooth without using any extra cement complete all as specified and as directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 14 | M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.06 sqm but n. exc 0.11 sqm, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed. |
| 15 | M&L non skid ceramic coloured tiles 7-8 mm thick (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed. |
| 16 | M&L Glazed coloured ceramic tiles in vertical surface/ dado 450mmX 300mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 17 | M&L Green marble 18-20 mm thick machine cut , bedded jointed and pointed with grey cement slurry including cutting and polishing laid over 15 mm thick cement mortar (1:6) complete all as specified and as directed. |
| 18 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed. |
| 19 | Taking down door chowkats or frames with shutters, any type (without taking off shutters from the frame) area not exceeding 1.50 sqm omplete all as specified and directed . |
| 20 | Taking down door chowkats or frames with shutters, any type (without taking off shutters from the frame) area not exceeding 1.5 sqm but n.exc 4.0 sqm )omplete all as specified and directed . |
| 21 | Taking down shutters of any description exc 1 sqm but n.exc 2.0 sqm each and removal store complete all as specified and directed. |
| 22 | S&F pressed steel frames for doors with one or more rivets including neccesary fixing lugs, hinges, lock strike plate etc of size 105mm x 60mm filling with PCC 1:3:6 type C0 (using 12.5 mm graded stone aggregate) complete all as specified and as directed. |
| 23 | S&F pressed steel frames for doors with one or more rivets including neccesary fixing lugs, hinges, lock strike plate etc of size 165mm x 60mm filling with PCC 1:3:6 type C0 (using 12.5 mm graded stone aggregate) complete all as specified and as directed. |
| 24 | S&F 2nd class HW pannel shutters 35mm thick. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 25 | S&F 2nd class HW glazed and skelton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass. Gauze etc complete all as specified and directed. |
| 26 | S&F Floor door stopper of aluminium alloy body confirming to Fe-290 Gde-165 and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 27 | M&L 18/19 mm thick pre-laminated particle board interior grade pre-laminated one side with decorative choice laminating & other side balancing white lamination fixed with screw to angle frame work for cupboard shutter and shelves including taking down old one complete all as specified and directed. |
| 28 | M&L 18/19 mm thick pre-laminated particle board interior grade both sides balancing white lamination fixed with screw to angle frame work for cupboard shutter and shelves including taking down old one complete all as specified and directed. |
| 29 | M&L for external teak wood lipping 12 mm thick fixed with nails on external edges of pre-laminated particle boards complete all as specified and directed. |
| 30 | S&F stainless steel continous piano hinges, mild steel, bright finish or electro galvanised of width of flap 30mm complete all as specified and directed at site complete all as specified and directed. |
| 31 | M &L for 125 mm magnetic catches with brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 32 | S&F for 125 mm size of hasp & staple safety type aluminium anodised with mild steel hinge pin including bolt to heinge plate and fixed with screws complete all as specified and directed. |
| 33 | S&F in repair for galvanised rigid steel conduit 20 mm external dia pipe for hanger rods including necessary arrangement to fixed in cup board complete all as specified and directed. |
| 34 | Supply and fixing in repair windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513\\"D\\" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed and wire mess shutter and all fitting, fixtures accessories incl 6mmx12mm flat iron with 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series) NOTE: (i) Glazed shutter with 4.00 mm thick glass, mesh shutter with 32 gauge stainless mesh and MS grill as per srl no 10,11 and 13 of notes of above mentioned drawing is deemed to be inclusive in the rate quoted for unit (ii) Glass, stainless teel mesh will be fixed to window by authorised rep of manufacturer of window only. Rate including taking down of windows and making good the surface. |
| 35 | Supply and fixing in repair windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513\\"D\\" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for single shutter with grill, glazed shutter and all fitting, fixtures accessories incl 6mmx12mm flat iron with 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(3000 series) NOTE: (i) Glazed shutter with 4.00 mm thick frosted/plain glass, mesh shutter with 32 gauge stainless mesh and MS grill as per srl no 10,11 and 13 of notes of above mentioned drawing is deemed to be inclusive in the rate quoted for unit (ii) Glass, stainless teel mesh will be fixed to window/ventilator by authorised rep of manufacturer of window/ventilator only. Rate including taking down of windows and making good the surface. |
| 36 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples complete all as specified and directed. |
| 37 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples complete all as specified and directed. |
| 38 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete as per manufacturer’s specification & drawing and as directed. |
| 39 | S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottoms rails MS frame shall be covered with heat moulded plain colour PVC C Chennel having a PVC sheet strip of 20 MM width stuckin side with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail in either side and as gep insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the styles and rail with suitable PVC sheet beading and joint together with solvent cement complete all as specified and directed. |
| 40 | Supply only Butt hinges,medium weight, cold rolled, stainless steel of size 100mm complete all as specified and directed. |
| 41 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.. |
| 42 | S&F 200 mm length aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed. |
| 43 | S&F 150 mm length aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed. |
| 44 | S&F 150 mm size aluminium handle, cast type anodized complete all as specified and as directed. |
| 45 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re- fixing or removal to store complete all as specified and directed. |
| 46 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for re- fixing or removal to store complete all as specified and directed. |
| 47 | S&F 15 mm bore steel tubing galvanized medium grade with all fittings and fixed concealed to walls and ceiling or laid in floors complete all specified and as directed. |
| 48 | S&F 20 mm bore steel tubing galvanized medium grade with all fittings and fixed concealed to walls and ceiling or laid in floors complete all specified and as directed. |
| 49 | S&F in repair brass chromium plated shower rose 125 mm size with swivel joints including fixing to pipe complete all as specified and directed. |
| 50 | S&F in repair 15 mm dia bore CP wall mixture (water saving) with all accessories complete all as specified and as directed. |
| 51 | S&F in repair 15 mm dia bore CP sink mixture (water saving) with all accessories complete all as specified and as directed. |
| 52 | S&F in repair 15 mm dia two in one CP bib cock long body with wall flange (water saving tap) screwed for iron pipe complete all as specified and as directed. |
| 53 | S&F Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed . Make : Cat Part No ALD-565 of Jaquar or equivalent in Hindware / Parryware |
| 54 | S&F in repair 15 mm dia brass CP bib cock long body with wall flange (water saving tap)screwed for iron pipe complete all as specified and as directed. |
| 55 | S & F in repair for brass CP 15 mm bore angle valve cast screwed down, high pressure, with crutch or butter fly handle, for iron pipe or for unions complete all as specified and directed. |
| 56 | S&F in repairs stainless steel CP grating round 100mm dia with hole or withouth hole complete all as specified and as directed. |
| 57 | S&F in repair PVC connection of 45 cm long with 2 Nos PTMT side nuts screwed with iron pipe of 15 mm dia complete all as specified and directed. |
| 58 | S&F stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws embedded in wall complete all as specified and directed. |
| 59 | S&F in repair vitreous china WHB white, flat back, size 550mm x 400mm including brackets ,cupling and all accessories etc complete all as specified and as directed. |
| 60 | S&F brass C.P tubular Towel rail 20 mm dia, D type 60 cm long complete all as specified and directed.. |
| 61 | S&F brass CP towel ring 200mm dia complete all as specified and directed. |
| 62 | S&F 600mm X 450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick commercial plywood & fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 63 | S&F in repair wash hand basin CP mixture swan neck tap left /right/front operated knob (water saving) screwed for iron pipe and fixed 15mm bore complete all as specified and directed. |
| 64 | S & F corner glass shelf with bracket of Make-BEA-46 of Prayag or equivelent complete all as specified and directed. |
| 65 | S & F front glass shelf with bracket of Make-BEA-46 of Prayag or equivelent complete all as specified and directed. |
| 66 | S&F in repairs 32mm bore and 75cm long PVC flexible waste pipe for WHB/Sink complete all as specified and directed. |
| 67 | S&F in repair curtain rods with mild steel conduit pipe 20 mm bore PVC coated of 1 mm thick including temples, brackets etc complete all as specified and directed. |
| 68 | M &L two coats of synthetic enamel paint over a coat of pink primer including prepration of newly wooden surfaces complete all as specified and directed. |
| 69 | M&L one coat of synthetic enamel paint including prepration of old wooden surfaces complete all as specified and directed. |
| 70 | M&L one coat of synthetic enamel paint including prepration of old steel surfaces complete all as specified and directed. |
| 71 | M & L Preparation of newly plastered or unplastered surface and applying two coats of distemper oil emulsion over a one coat of primer including 1 mm thick wall care puttyon walls complete all as specified and directed. |
| 72 | M&L for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply two coats of oil bound distemper including 1 mm thick wall care puttyon walls complete all as specified and directed. |
| 73 | M & L preparation of newly plastered surface and applying three coats of white wash on ceilings complete all as specified and directed. |
| 74 | M&L for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply two coats of white wash on walls complete all as specified and directed. |
| 75 | M&L for preparation of newly plastered or concrete surfaces of wall and applying two coat of weather coat over a coat of primer complete all as specified and directed. |
| 76 | M&L for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply two coats of weather coat over and including a coat of primer complete all as specified and as directed. |
| 77 | M&L for complete removal of existing treatment of old decorated surfaces of ceiling by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply two coats of white wash on ceilings complete all as specified and directed. |
| 78 | M & L for PCC 1:2:4 type B1 (using20 mm graded stone aggregate) as in bed for pvc water tank, roof kerbs benching rounded or chamfered on edge complete all as specified and directed. |
| 79 | M & L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in Plinth Protection including making joints & filling with sand bitumen mastic complete all as specified and directed. |
| 80 | S&F Stainless steel of size 900mmx800mm plate rack fixed in position including all necessary fittings complete all as specified and directed. |
| 81 | M&L for repair to broken sides/bottom of roof projection, facia, column, chajja etc by all means i.e. either by cement plaster of any thickness or by cement concrete 1:1.5:3, type A-0, using 12.5 mm graded stone aggregate etc, using chicken wire mesh to reinforce & form work as required with two coat of weather coat over one coat of primer complete all as specified and as directed. |
| 82 | M&L for screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed. |
| 83 | M & L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror polish complete all as specified and directed.Note : One piece of kota stone along the length of tread and riser of stair will be fixed. |
| 84 | M/L for machine cut kota stone slab 20-25mm thick as in riser of steps, skirtings, dados etc over 10 mm thick cement screed in cm (1:6) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror polish complete all as specified and directed. Note : One piece of kota stone along the length of tread and riser of stair will be fixed. |
| 85 | Taking down rainwater pipes (any Size or pattern), including all fittings, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed. |
| 86 | S&F PVC (SWR) pipes of 110 mm bore single socketed, in any length with rubber ring joints, fixed with walls or trenches complete all as specified and directed. |
| 87 | S&F PVC (SWR) bends any radius for 110 mm bore PVC pipe with cement joints complete all as specified and as directed. |
| 88 | S&F PVC (SWR) junction single,(Single T) equal or unequal (Supplied and fixed bore of pipe in 110mm) omplete all as specified and directed. |
| 89 | Dismantling of CI pipe incl all fittings from wall/trenches any type & any size complete all as specified and directed. |
| 90 | S & F for 75 mm dia cast iron soil/waste pipe in any length with or without ears with cement joints laid in trenches or in floors etc complete all as specified and directed. |
| 91 | S&F bends any radius for 75 mm bore CI pipe with cement joints complete all as specified and as directed. |
| 92 | S&F 75 mm dia CI Branch pieces, T Section, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval acess door complete all as specified and as directed. |
| 93 | S&F CI vent cowl 75 mm complete all as specified and as directed. |
| 94 | S&F CI gully trap 125/110 mm setting and jointing with solvent complete all as specified and as directed. |
| 95 | S&F in repair CI floor trap 75mm with grating icluding jointing with solvent complete all as specified and as directed. |
| 96 | M&L for dismantling loose concrete cover of RCC slab, Ceiling, columns, beams, chajjas, balkonies, staircase and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes,removing of rust from existing steel surfaces with rust removers of SIKKA rustoff 100 applied in two coats @ 0.15 Kg/Sqm per coat of steel surface and cleaning all rust with steel wire brush and washed with water and allowed to dry incl S&F welded fabric GI wire mesh or wire, size not less than 75 x 75 mm and 3 mm dia as reinforcement to concrete. After placing the additional re-inforcement, all concrete surfaces shall be throughly scrubbed with brushes, washed with water and allowed to dry. To this surface, apply chemical policrete admixture at the rate not less than 2% by weight of cement and providing minimum 50mm thick (average thickness) guniting mix (using 1 partof ordinary Portland Cement 53 grade and 2 parts of ghaggarsand mixed with adhesive /admixture at the rate as directed) with a pressure of 2 2 to 2.5 Kg per Sqm by gunitingmachine and surfaces finished even and fair including necessary padding, shuttering /form work etc and finally applying 5 mm cement thick plaster in CM 1:3 complete, all as specified and directed by Engineer-in-Charge. Note : Wherever steel reinforcement required will be measured and paid saperately. |
| 97 | Demolition of cement concrete (reinforced) in any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 98 | M & L RCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in chajja, fins, parapet wall & roof projection complete all as specified and directed. |
| 99 | M & L MS deformed TMT bars 10mm dia and over,cut to length,bent to shape reqd incl cranking,bending spirally for hooping etc and binding with MS wire (annealed) not less than 0.90 mm dia or securing with clip to the foundation complete all as specified and directed. |
| 100 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 101 | M & L framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand and similar work conforming to Fe 290,Gde - E-165 complete all as specified and directed. |
| 102 | M&L two coats of synthetic enamel paint over a coat of red oxide primer including prepration of newly steel surfaces complete all as specified and directed. |
| 103 | S&F mild steel helical door spring 300 mm ordinary rat tail type including roller and roller plate complete fixed with screws to wooden frame or with welding to steel frames complete all as specified and directed. |
| 104 | Demolition of any type of roof treament (i.e App membrance, brick tiles, mud phuska, cement concrete/ lime concrete etc ) from roof any thickness including leaping plaster including removing the demolished material from roof out side defence land complete all as specified and directed. |
| 105 | M & L for cement concrete 1:2 :4 type B-0 (using 12.5 mm graded stone aggregate) laid as in padding over roof slabs with WPC as per manufacturer instruction for providing proper slope including finishing surface by using extra cement even and fair complete all as specified and directed. |
| 106 | Cleaning and preparation of the surface to receive Fosroc Proofex ORG or its equivalent in approved make water proofing system shall be a sound base, any crack shall be treated with cementious repair mortar of Fosroc Renderoc CS or epoxy crack filling mortar by proper grooving arrangement complete all as specified and directed. |
| 107 | M&L Providing and laying / fixing TPO membrane of nonflammable waterproofing of roof which shall be a 1.5mm thick loose laid TPO membrane layers overlapped to achieve a minimum weld of 110mm, Hot air welding can be either hand applied or by means of automatic machines and the rollseither end are overlapped with layers of non-woven geotextile fiber, the separation layer provided to prevent the mechanical abrasion and cushioning between the Fosroc Proofex ORG membrane or its equivalent in approved make and the concrete substructure, the termination of Fosroc Proofex ORG or its equivalent in approved make by aluminium strip anchoring.Note: Work shall be executed by authorised applicator with prior experience of more than 5 years in applying similar system. |
| 108 | S&F in repair to rotational moulded vertical water storage tanks triple layer ( White colour) with closed tops ( cylindrical ) hoisted and fixed in position 500 litre capacity including disconnecting and refixing the existing GI fitting and pipe complete all as specified and directed. |
| 109 | S&F in repair of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends for iron pipe of size 20 mm bore complete all as specified and directed. |
| 110 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars, precast concrete blocks etc complete all as specified and directed. |
| 111 | M & L for brick work with sub-class `B' bricks old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 112 | M&L for post Anti Termite Treatment of soil under existing floors using emulsion @ 01 litre / hole, 300mm apart including drilling & plugging 12mm dia holes with CM(1:2) to match the existing floors complete all as specified and directed. |
| 113 | M&L for post Anti Termite Treating the soil under plinth protection @ 5 litres of emulsion / Sqm of surface area complete all as specified and directed. |
| 114 | M &L post Anti termite treatment along the external wall below concrete or masonry apron and wooden joinery using chemical emulsion @ 2.25 litres / m including drilling & plugging holes etc. in apron complete all as specified and directed. |
| 115 | S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen cabinet shutter complete all as specified and directed. |
| 116 | S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer complete all as specified and directed. |
| 117 | S&F factory made 5mm thik PVC sheet of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 5mm thick PVC sheet paneling for back side(wall side) complete all as specified and directed. |
| 118 | S&F 100 mm size Stainless Steel handle complete all as specified and as directed. |
| 119 | M &L for 50 mm magnetic catches with brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 120 | S&F 38mm size Stainless Steel Piano hinges complete all as specified and as directed. |
| 121 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling as mass concrete complete all as specified and as directed. |
| 122 | M&L for Machine pressed precast concrete interlocking paver block any shape and sizeconfirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment laid, complete all as specified and directed. |
| 123 | M&L for Rubber moulded chequered tile gloxy finished Size 300mm x 300mm x 25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, with grey cement and color pigment and cut and polished laid over including 15 mm Screed bed or bedding layer of CM 1:6, complete all as specified and directed. |
| 124 | Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc and making good disturbed surface of walls, floors etc. complete all as specified and directed. |
| 125 | M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for modular plates of required size, covered with modular plates, suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. ( Note- Modular Switch and sockets will be measured and paid seperately). For one light/fan point controlled by one SP switch |
| 126 | All as per item No 125 above but For one light point controlled by two 2 - way SP switches |
| 127 | All as per item No 125 above but For one bell point controlled by one No bell push |
| 128 | All as per item No-125 above but for one 3 pin socket out let, 6 Amps on same board |
| 129 | All as per item No-125 above but for one 3 pin socket out let, 6 Amps on Independent board |
| 130 | All as per item No 125 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including Single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire 2.5 sqmm FRLS all as specified and directed by Engineer-in-Charge. ( Only one 15 Amp point will be in one circuit) |
| 131 | S&F Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed. |
| 132 | S&F Modular Socket, 6A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed. |
| 133 | S&F Modular switch 2 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed. |
| 134 | S&F Modular switch 1 way 16A ,1 module suitable for 240 Volt AC complete all as specified and directed. |
| 135 | S&F Modular Socket, 16A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed. |
| 136 | S&F Bell push Modular flush type 6 Amps suitable for 240 volt AC Complete all as specified and directed. |
| 137 | S&F Ding dong bell AC 230 volt single pole complete all as specified and directed. |
| 138 | S&F Electronic modular Fan Regulator rotary flush step type 120 watt, 2 module , 240 volt 50 Hz AC complete compatible with BLDC fans complete all as specified and directed. |
| 139 | S&F Ceiling roses, surface bakelite 65MMx50mm ,3 terminals , PVC/Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed. |
| 140 | Taking down of light fittings of any wattage complete all as specified and directed. |
| 141 | Supply and fixing surface mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with three core copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge. Make :-Cat Part No - CCS-100-20-65-HLZ-DP-NWH of crompton/LHEBFOPN137W020 of havells/SLEBT20GI of surya |
| 142 | Supply and fixing surface mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,10 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with three core copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge. Make :-Cat Part No - CCS-103-10-65-SL-DP-NWH of crompton/LUMININEPLUS PROBSION LED865SP Cassind of Havells/SLEBT10IL of surya |
| 143 | S &F Decorative, wall mounting, brushed nickle finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base with flexible copper wire, three core cable complete all as specified and directed. |
| 144 | Supply and fixing LED security light fitting 35 watt high pressure dia cast aluminium housing and secondary optical lens for superior light distribution , heat resistant thoughened glass with frame, IP66 protection complete with lamp & connected item and connection with suitable cable from ceiling rose to light fitting and fixing on GI bracket made out of suaitable GI Pipe medium garde 1.2 mtr long bent to shape and fixed on wall with flat iron clamps, nuts bolts washer etc all as specified and directed. |
| 145 | Taking down including disconnecting the electric connection of ceiling fan and dismantling blades,greasing complete all as specified and directed. |
| 146 | Hanging / fixing only ceiling fan received from item No 145 above and connecting up with suitable size of copper cable from connector of fans to ceiling rose complete all as specified and directed. |
| 147 | Taking down including disconnecting the electric connection of exhaust fan and dismantling blades,greasing and painting the whole assembly complete all as specified and directed. |
| 148 | Fixing only Exhaust fan received from item No 147 above and connecting up including fastner and suitable size of copper cable from connector of fans to ceiling rose complete all as specified and directed. |
| 149 | Taking down unserviceable submain wiring of alluminium two/three runs of any size cable including batten/conduit complete etc and making good disturbed surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
| 150 | Taking down unserviceable submain wiring of alluminium two/three runs of any size cable including batten/conduit complete etc and making good disturbed surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 16, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 daySep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender