Tender For Addition Alteration To Building No. T-23 And T-7 In 3 Afsr Under Ge (Af) Borjhar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Sep 2026
7 days left
EMD
87400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Building No. T-23 And T-7 In 3 Afsr Under Ge (Af) Borjhar
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone / boulder masonary built in CM including all quoins, arches, pillars, etc but excluding ashlar, facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed by Engineer-in-Charge |
| 2 | Demolition RCC of any description and any position not otherwise specifically provided included latent concrete. |
| 3 | Dismantling AC sheet (Corrugated, Semi corrugated etc) as in roofs etc complete all as specified |
| 4 | Dismantling timber scantlings 40 Sqcm and over in section, in any position unframed work, door frame complete all as specified and directed . |
| 5 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, any description including cover fillets all as directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed. |
| 7 | Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each, removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed. |
| 8 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 Square Metre and not exceeding 4 Square Metre each complete all as specified and directed. |
| 9 | S&F for Galvalume zinc coated GI based corrugated sheet shall be 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon andfinished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers all as specified and directed. |
| 10 | S&F for Galvalume zinc coated GI based plain sheet shall be 0.50mm thick (total coated thickness), 550 Mpa minimum, yieldstrength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers all as specified and directed. |
| 11 | M&L colour glazed ceramic coloured tiles 350mmx250mmx7mm/ 450x350x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement as in vertical surfaces such as wall , skirting, dados and risers to steps etc to match with and including 10 mm thick screed bed or bedding layers in cement mortar (1:3) complete all as specified and directed. |
| 12 | M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6), complete all as specified and directed. |
| 13 | M&L for colured Virified Ceramic tiles 8-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and as directed. |
| 14 | M&L for vitrified ceramic tiles 8-10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar (1:4), complete all as specified & directed. |
| 15 | S&F solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement/ adhesive and fixing at site on PVC/ wooden frame as per specifications and drawing given in SSR. Note : PVC Fillets shall be measured and paid for separately. |
| 16 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing given in SSR and as directed. |
| 17 | M&L for second class soft wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc 6 sqcm and not exc 13 sqcm including tarring complete all as specified. |
| 18 | M&L for Non asbestos fibre cement building boards 4-6mm in thickness fixed or laid / inserted to timber/GI/Aluminium frame work with screws along with Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm all as specified and directed.Note : Supply of GI/Aluminium frame is included. |
| 19 | M&L for 2nd class hardwood clean sawn as in scantling Timber framed and fixed frame , door frame , as in truss frame etc complete all as specified and directed . |
| 20 | S&F aluminium anodised powder coated frame of standard section as directed for doors, windows( three track), ventilators of any colour as approved with one or more rebates including joining cleat, etc for fixing etc. complete all as specified & as directed. |
| 21 | S&F aluminium anodised powder coated window and ventilator shutters, sliding type fixed open track with member of window shutters of section 39.40x17.70x1.2mm and other standard bombay sliding section but not less than 0.51kg/Rm incl all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats, glazing clip, rubber packing, Aluminium snap beeding etc all as specified and directed. Note:- Glass and wire mesh shall be measured and paid separately. |
| 22 | S&F aluminium anodised powder coated door shutters, with top rail of size 47.62mm x 44.45mm, intermediate rail 100mm x 44.5mm, bottam rail 88mm x 44.5mm, style size 44.45mm x 47.52mm, including necessary joining cleats, glazing clips, rubber neoprene packing/ rubber gasket, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified & directed. |
| 23 | S&F 4 mm thick obscured or frosted sheet glass of ordinary quality and glazing with snap grid / oil putty / wooden beading to wooden frame or steel frame or aluminium frame in square not exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. |
| 24 | S&F 4 mm thick sheet glass of ordinary quality and glazing with aluminium snap grid / oil putty / wooden beading to wooden frame or steel frame or aluminium frame in square not exc 0.5 Sqm in each pane including solar control film 25 micron reflective type gare ware sun control or equivalent complete all as specified and directed. |
| 25 | S&F 5.5mm thick sheet glass, ordinary quality, glazing with oil putty or with wooden beads or aluminium, area exceeding 0.50 Sqm but not exceeding 1.0 Sqm each pane with and including solar control film 25 micron reflective type (gare ware sun control or equivalent) complete all as specified and directed. |
| 26 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or screws to alluminium skeleton door pannel complete all as specified and directed. |
| 27 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 28 | S&F in repair mild steel mortice lock 4 levers, vertical type, size 100mm complete all as specified and directed. |
| 29 | S&F for 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and directed. |
| 30 | S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed. |
| 31 | S&F in repairs Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing and taking down old door shutter with frame (100 mm hinges 3 nos, 2 nos handle, tower bolt 100 mm 2 nos) complete all as specified & directed. |
| 32 | M&L for brickwork with subclass 'B' Bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-charge. |
| 33 | M&L for brickwork with subclass 'B' Bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:6 complete all as specified and directed by Engr-in-charge. |
| 34 | S&F Mild steel work as in band, straps, supports for RWP, clamps, hold fasts, wall ties, hooks & pintle hinges and similar small articles conforming to Fe-290-0 or Gde E-165 complete all as specified and as directed by Engineer-in-Charge |
| 35 | S&F in repairs Toilet paper holder, viperous china box type complete all as specified & directed |
| 36 | S & F oval type counter basin size 595x420x200 including waste coupling etc complete as specified and directed by Engr-in-Charge. |
| 37 | S & F in repairs for PVC low level flushing cistern 10 Ltr capcity Valveless duel syphonic action type, flushing cistern , low level white, with inlet ball valve flat and handle including PVC flush pipe 32mm bore and mild steel brackets made out of 25 by 25 by 3mm thick angle iron of required length fixed to wall with PCC type B-0 (1:2:4) complete all as directed . |
| 38 | S & F in repairs viterous China Wash down water closet Pan 'Pedestal Pattern' white with seat cover white closet pattern with flat battom and cover mild steel chromium plated or aluminium anodised hinging device and joints etc and connection to drain, flushing ,pipe, anti symphonage pipe and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concerete 1:2:4 type (B-0) complete all as directed . |
| 39 | S& F in repairs chromium plated brass towel ring (premium quality) including taking down old one complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F in repairs Angular cock ( 15 mm dia of bore), cast copper alloy, one way / two way fancy type Chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed as Engr-in-charge. |
| 41 | S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed as Engr-in-charge. |
| 42 | S&F 15 mm bore CP two way bib cock with flange fancy type complete all as specified and as directed. |
| 43 | S & F in repairs hand shower (health faucet) ABS body mile steel chromium plated for 15mm dia, 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in postion complete in all respect as specified. |
| 44 | S & F Decorative designer looking mirror of selected quality 5 mm thick mounted on 2mm thick laminated PVC sheet with necessary fixing arrangement complete as directed. |
| 45 | Dismantling CI/AC/PVC (SWR) pipes & fittings of any description fixed to wall/laid in trenches including making good disturbed portion of wall floor etc. all as specified and directed. |
| 46 | S & F 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints , laid in trenches or in floor complete all as specified and directed by Engineer-in Charge. |
| 47 | S & F in repairs 110 mm dia PVC (SWR) bends with access door complete all as specified and directed by Engineer-in Charge. |
| 48 | S & F in repairs 110 mm dia PVC (SWR) bends without access door complete all as specified and directed by Engineer-in Charge. |
| 49 | S & F in repairs PVC (SWR) junction single (single T) equal or unequal 110mm bore, without access door complete all as specified and directed by Engr-in-charge. |
| 50 | S & F in repairs PVC (SWR) junction single (single T) equal or unequal 110mm bore, with access door complete all as specified and directed by Engr-in-charge. |
| 51 | Taking down floor trap/nahani trap of any description any size and making good to disturbed portion with cement concrete type B-1, 1:2:4 with water proofing compound complete all as specified and directed. |
| 52 | M & L 75mm outlet dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed. |
| 53 | S&F 75 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engineer-in Charge. |
| 54 | S & F in repairs 75 mm dia PVC (SWR) bends without access door complete all as specified and directed by Engineer-in Charge. |
| 55 | S & F in repairs PVC (SWR) junction single (single T) equal or unequal 75mm bore, without access door complete all as specified and directed by Engr-in-charge. |
| 56 | S&F in repairs in repairs CP Soap dish, approximate size 160X160X90mm complete all as specified & directed |
| 57 | S&F in Pillar taps,15mm dia fancy type with capstan heads,chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts,screwed for iron pipe and fixed. |
| 58 | Taking down cement plaster in any description on brick or stone wall etc incl racking out joints.hacking for key scrubbing down with water etc. all as specified and as directed by Engr-in-Charge. |
| 59 | M&L for 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 60 | M&L 15 mm thick rendering in cement mortar (1:4) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 61 | M & L for 40 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified and directed. |
| 62 | M&L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1 to 2 mm thick BIRLA/JK water proof wall care putty complete all as directed by Engr-in-charge. |
| 63 | M&L for preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer applied complete all as specified and directed by Engineer -in-Charge. |
| 64 | M&L for preparation of newly plastered wall surfaces and applying 1-2 mm thick wall putty complete all as specified and directed by Engineer -in-Charge. |
| 65 | M&L for Complete removal of existing treatment and applying two coats of white wash to old decorated (white washed) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 66 | M&L for Complete removal of existing treatment applying two coats of cement based paint to old decorated surface of wall over a coat of primer including preparation complete all as specified and as directed. |
| 67 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, WEATHER COAT Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as directed. |
| 68 | M&L for applying two coats of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge. |
| 69 | S&F in repairs vitreous china urinal, full stall type, white including providing & fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia, complete all as specified & directed. make jaguar cat no. URS-WHT- 13253N , PRS-073 with all necessary fittings required like flush valve connection pipe spreaders complete all as specified and directed |
| 70 | S&F 18 - 20 mm thick granite slab cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 20mm screed bed in CM(1:6) completed all as directed. |
| 71 | M&L for 18- 20mm thick Granite (of any type) machine cut, in verticle surfaces bedded and jointed with grey cement slurry, over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete complete all as specified and directed by Engr-in-charge. |
| 72 | M& L for forming Construction joint 30mm deep x 10mm wide filled with Grade \\"B' sealing compound complete all as specified and directed. |
| 73 | M&L for 75 mm thick cement concrete type C-1 1:3:6 as in plinth protection complete all as specified . |
| 74 | S&F 10-18 mm thick single side prelaminated wood grain solid pvc sheet suitably fixed in shelves partitions and shelves of built-in-cupboards, almirah, book cases, racks pelmets and similar work with all fittings as specified and directed |
| 75 | M&L for preparation of new or untreated painted wood and wooden based surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 76 | S&F Mild Steel Butt hinges, heavy weight, cold rolled, of size 100 mm complete all as specified and directed. |
| 77 | S&F 150 mm long mild steel barrel tower bolt, stove enameled black with bright bolt complete all as specified and directed. |
| 78 | S&F in repairs Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed. |
| 79 | Taking up or down steel tubing 15 mm bore and connections complete all as specified and directed by Engr-in-Charge. |
| 80 | Taking up or down steel tubing 20 mm bore and connections complete all as specified and directed by Engr-in-Charge. |
| 81 | Supply and fixing of 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings complete on walls and ceilings or laid in floors all as specified and directed. |
| 82 | Supply and fixing of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings complete on walls and ceilings or laid in floors all as specified and directed. |
| 83 | S &F of Brass Elbow 16/20 mm bore complete all as specified |
| 84 | S &F of Brass Elbow (3/4 X ½) 20 mm bore complete all as specified |
| 85 | S &F of Brass Tee 16/20 mm bore complete all as specified |
| 86 | S &F in repairs of 15/ 20 mm bore gate valve complete all as specified |
| 87 | Demolition of cement concrete (unreinforced) of any description and in any position for any depth not otherwise specifically provided complete all as specified and directed |
| 88 | M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified and as directed. |
| 89 | M&L for Prepolished chequered cement concrete tiles with grey cement & pigment of size 30cmx30cmx20 to 22mm thick set & jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with grey cement complete all as specified and as directed by Engineer-in-Charge. |
| 90 | S&F in repairs aluminium body hydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairs complete all as specified and directed. |
| 91 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed includind taking down and refixing of shutter as in repairs complete all as specified and directed. |
| 92 | Material and labour for Point wiring with 1.5 Sqmm FR PVC insulated and sheathed multi stranded (FRLSH) copper conductor cable in and incl rigid PVC conduit concealed with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness hylum laminated sheet , cover of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm (FRLSH) PVC insulated and unsheathed multi stranded copper conductor cable as earth wire (green colour) to common earth dolly complete all as specified and directed by Engr-in-charge. Note : (a) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc(b) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan etc with proper fixing clips all as directed |
| 93 | All as per serial item No 95.00 here in before but for one 3 pin 5 Amp socket outlet on independent board. |
| 94 | All as per serial item No 95.00 here in before but for one 3 pin 5 Amp socket outlet on same board. |
| 95 | Material and labour for Point wiring with 4.0 sqmm FR PVC insulated and sheathed multi stranded (FRLSH) copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness plastic laminated sheet, cover for one 3 pin socket outlet 15 Amp on independent board including continuous 4.0 sqmm copper conductor cable (FRLSH) (multistranded) PVC insulated and unsheathed Cable as earth wire to common earth dolly & cutting chases and making good as required complete all as specified and directed by Engr-in-charge |
| 96 | Material and labour for ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block, 6A, Pilot 2 Plate, complete all as specified and directed by Engr-in-charge |
| 97 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 98 | Supply and fix of MCCB TPN DB 4 way double door,IP 43 protection,Glazed door, isolated neutral bar,insulated bus bar assembly,mechanical strength of IK09, complete all as specified and directed. |
| 99 | Supply and fix of MCCB 63 Amps ,4Pole,16 Ka,415 volts complete all as specified and directed. |
| 100 | Supply and fix in repairs of DB 8 way MCB SPN double door, glazed type, IP 43 protection,Glazed door, isolated neutral bar,insulated bus bar assembly,mechanical strength of IK09, complete all as specified and directed. |
| 101 | Supply & fix in repair of MCBs single pole (SPN) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards conforming to IS/IEC 60898-1 (ISI marked) complete all as specified and directed. |
| 102 | Supply & fix in repair of MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards conforming to IS/IEC 60898-1 (ISI marked) complete all as specified and directed. |
| 103 | M&L for Type 1+2 AC Surge Protection Device 1P+N (2 Pole) 320 volt, 15KA, withou Remote Signaling fitted in IP 66 cover box complete all as specified and directed. |
| 104 | M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. Note: The rate quoted shall inclusive of GI wire 4 mm dia with GI pipe protection 15 mm, light grade up to 7.5 m. |
| 105 | M&L for Modular type 5 step Fan Regulator - 2 M, oro white, complete all as specified and directed by Engr-in-charge |
| 106 | M&L for Modular switch 6 A, one way switch white, complete all as specified and directed by Engr-in-charge |
| 107 | M&L for Modular 6 A, 5 pin socket, complete all as specified and directed by Engr-in-charge |
| 108 | M&L for Modular 6 A/16 A socket, complete all as specified and directed by Engr-in-charge |
| 109 | M&L for Modular 16 Amp, one way switch white complete all as specified and directed by Engr-in-charge |
| 110 | M&L for Dummy Plate - 1 Module Oro (White), complete all as specified and directed by Engr-in-charge |
| 111 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m all as directed. |
| 112 | S & F LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. |
| 113 | Excavating in trenches manually not exceeding 1.5m wide and not exceeding1.5 mtr in depth/ width for laying under ground cable / foundations and getting out in soft / loose soil all as specified and directed. Note: During excavation no mechanical excavator is permitted at site, contractor will do the excavation through manually. |
| 114 | Returning, filling in incl spreading, leveling, watering and well ramming in layers not exceeding 25cm all as specified and directed. |
| 115 | Removing of surplus excavating material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed. |
| 116 | M&L for HDPE Double wall corrugated pipe of size 63/50 mm as per IS: 16098 Part-II-2013 and ISO 21138 & BSEN 13476-1TO 3 laid in trenches/wall for protection cables complete all as specified and directed. |
| 117 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 3.5 core all as specified and directed. |
| 118 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 119 | M&L for sub main wiring with two run of single core PVC insulated unsheathed multi stranded copper conductor cable (FRLSH) of size 6.0 Sqmm 1100 volts grade and one run of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) of size 6.0 Sqmm 1100 volts grade as earth continuity conductor (as per colour code) drawn through in and including PVC concealed conduit (medium grade) of size 25 mm with all accessories such as bend, elbow, tee etc and making grooves in any type of brick wall/ ceiling, plastering and making good disturbed surfaces as per existing and complete incl. taking down old one all as specified & directed. |
| 120 | Supply and fixing round shape 6 watt 230 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender