Tender For Addition/Alteration To Washing Area Including Certain Minor Works (04 Jobs) At Afs Under Ge(Af) Sambra.
Tender Value
19.50 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
18 days left
EMD
39000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Belagavi → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Washing Area Including Certain Minor Works (04 Jobs) At Afs Under Ge(Af) Sambra.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) of any description and in any position and removal of debris out of MD land complete all as specified and directed |
| 2 | Dismantling wall floor hearth tiling including cement mortar bedding (but not backing) and removal of debris out of MD land complete all as specified and directed |
| 3 | M&L for providing and laying water proofing treatment in Washing Area and Water filling point etc., by applying cement slurry mixed with water proofing cement compound consisting of applying the following:- (a) M&L for applying first layer of cement slurry at 0.488 kg/ sqm mixed with Acrylic based polymer 'ARMOUR -CRETE' of structural water proofing pvt ltd by ratio 1:2 (one Armour Crete : Two cement) or 'POLYCRYL' of Green boro polychem pvt ltd by ratio 1:2 (one polycryl : Two cement) or Ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals pvt ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions complete all as specified and directed. Note:-This layer will be allowed to Air Cure for 4 hours (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry |
| 4 | M&L for plain cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregates) as padding in sunken portion in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directedand floor complete all as specified |
| 5 | M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.18 sqm but not exc 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles laid over and including cement screed 15 mm thick in CM(1:6) complete all as specified and directed. |
| 6 | M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7mm thick as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and incl 10 mm thick backing with CM(1:4) complete all as specified and directed. |
| 7 | Taking down cement plaster on brick/concrete/stone masonry walls etc incl racking out joints, hacking for key, scrubbing down with water etc complete including removing rubbish off the premises complete all as specified and directed. |
| 8 | M&L for rendering 15mm thick on fair faces of brick masonry in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | M&L for rendering 5 mm thick on brick work or concrete surface in CM 1:3 for ceiling finished even & smooth without using extra cement all as specified and directed. |
| 10 | M&L for preparing newly plastered ceilings surfaces and applying three coat of white wash complete all as specified and as directed. |
| 11 | M&L for preperation newly plastered surfaces and applying two coats of distemper oil emulsion, over a coat of primer on walls, pillasters, cornices, etc., including applying 3mm thick wall care putty over old surface complete all as specified and as directed |
| 12 | M&L for rendering 15mm thick on fair faces of brick masonry in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L for complete removal of existing treatment and necessary preparation of surfaces and applying two coats of100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance, exterior weather proof paint of required shed (company Depot tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm on walls, pillasters, cornices, drops, chajjas etc., complete all as specified and as directed. |
| 14 | S&F 15 mm dia brass chromium plated, fancy type, cast copper alloy bip tap screwed down, screwed for iron/CPVC/UPVC pipes and fixed complete all as specified and directed. |
| 15 | S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified |
| 16 | Taking up or down 15mm bore UPVC/steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed. |
| 17 | S&F 15mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings, etc.., complete all as specified and directed.Note : This item includes work at Third & Fourth Floor |
| 18 | M&L for cutting holes of superficial area not exceeding 150 Sqcm into or through in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed. |
| 19 | S&F PVC SWR pipe 110 mm bore, single socketed in any length with rubber ring joints,fixed to walls including clamps complete all as specified and directed. |
| 20 | S&F 110 mm dia bore PVC (SWR) bend with oval access door of any radius complete all as specified and directed. |
| 21 | S&F 110 mm dia bore PVC (SWR) bend of any radius complete all as specified and directed. |
| 22 | S&F in replacement 1000 ltrs rotational moulded poly- ethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position upto four storey height complete all as specified and directed. |
| 23 | S&F in replacement 2000 ltrs rotational moulded poly- ethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position upto four storey height complete all as specified and directed. |
| 24 | Taking down chowkats or frames exc 1.5 sqm but not exc 4 Sqm each (without taking of shutters from the frame) complete all as specified and directed. |
| 25 | S&F Anodised aluminium frame powder coated for doors, windows, ventilators (minimum thickness of powder coating 50 micron ) with one or more rebates including joining cleat for fixing complete all as specified and directed |
| 26 | S&F Anodised aluminium powder coating of any colour (thickness of powder coating not less than 50 micron) as in door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing ,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, etc., complete all as specified and directed |
| 27 | S&F 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work asin ceiling/wall panelling/partitions complete all as specified and directed. |
| 28 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws or aluminium beading complete all as specified and directed. |
| 29 | S&F floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring 140mm long complete all as specified and directed. |
| 30 | Excavation in trenches not exc. 1.50m wide and not exc 1.5 m in depth; for foundation etc.; or for shafts, wells, cesspits, manholes, pier holes not exc 10 sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed. |
| 31 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 32 | M&L for pre-cast cement concrete block masonry with solid blocks of mix 1:3:6 ,Type C-1 (using 20 mm graded crushed stone aggregates) exceeding 10 cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and setting in cement mortar 1:4 complete all as specified and directed. |
| 33 | M&L for pre-cast cement concrete block masonry type C1 1:3:6 (20 mm graded agrregate) solid blocks not exceeding 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified and directed |
| 34 | Returning,filling including, spreading, levelling , watering and well ramming inlayers not exceeding 25 cm in any type of soil complete all as specified and directed. |
| 35 | Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 36 | M&L for moorum /red bajri filling in floors or pavings,laid layers n exc 15 cm thick ,spread,levelled and rammed including watering complete all as specified and as directed. |
| 37 | M&L for broken stone or boulder hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 38 | M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregates) as in sub base of flooring complete all as specified and directed. |
| 39 | M&L 100mm thick cement concrete, 1:2:4, type B1 (using 20mm graded crushed stone aggregates) as in floor complete all as specified and directed. |
| 40 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 41 | M&L for sadarhalli stone 20mm thick, laid over and including 15mm thick screed bed in cement mortar 1:6 and jointed with 3mm spacer filled with grouting with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone slab including griding,rubbing and polishing including rounding to edges of slab if required complete all as specified and directed. |
| 42 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 surface finished even & smooth without using extra cement complete all as specified and directed. |
| 43 | M&L for applying two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on new plastered surfaces of walls complete all as specified and directed. |
| 44 | M&L for Pre cast reinforced cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregates) as in cover slab set in cement mortar 1:4. complete all as specified and directed.Note: Reinforcement shall be measured and paid separately. |
| 45 | M&L for TMT bars 6mm dia to 8mm dia cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. |
| 46 | S&F plain sheet glass 5.5 mm thick, ordinary quality, in squares not exceeding 0.5 Sqm for each pane, glazing with oil putty or aluminium beading complete all as specified and directed |
| 47 | S&F stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor or the side of waist slab with suitable arrangement including grouting complete all as specified and directed |
| 48 | M&L for 50mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregates) as in sub base of flooring complete all as specified and as directed. |
| 49 | M&L for 50mm thick PCC 1:2:4, type B1 (using 20mm graded crushed stone aggrehates) as in floor complete all as specified and directed. |
| 50 | S&F 25mm nominal bore, weighing not less than 62 gms PTMT extension nipple for water tank pipe, fittings of approved quality and colour. Complete all as specified and directed |
| 51 | S&F 40mm bore gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2 for iron pipe/CPVC/UPVC complete all as specified and directed. |
| 52 | Supplying and laying 40mm nominal bore size CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good complete all as specified and directed. |
| 53 | S&F in replacement 750 ltrs rotational moulded poly- ethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted and fixed in position upto four storey height complete all as specified and directed. |
| 54 | M&L for point wiring for one light point controlled by one switch with stranded FRLSH copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including MODULAR METAL FLUSH BOX ,modular white cover plate any size with support frame any size module complete all as specified and as directed. cover of approved make, for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated sheathed FRLSH copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and directed |
| 55 | S&F switch Modular type single pole 6 Amps One Way Switch AC 230V, 50HZ supply complete all as specified and as directed. |
| 56 | S&F 3 pin, 5 A ceiling rose on the junction box/ wooden block including connections etc. as required complete all as specified and as directed. |
| 57 | S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 58 | Dismantling of existing water cooler and refixing the same including painting at the specified location including necessary electrica, PVC connection and water supply connection, complete all as specified and as directed. |
| 59 | M&L for sub main wiring with 2 runs of 4 Sqmm PVC insulated FRLSH Copper conductor cable including PVC Conduit/Casing Capping of Suitable dia along with one run of 4 Sqmm FR copper cable for earth continuity conductor as earth lead for sub main wiring and connecting to common earth dolly complete all as specified and as directed. . |
| 60 | S&F industrial type sheet metal enclosure with metal clad socket, plug top and two pin and earth plug and socket complete with one single pole MCB SP 20 Amps 240 V complete all as specified and as directed. |
| 61 | S&F modular switch socket combination 3 pin, 16 Amp, flush type complete all as specified and as directed. |
| 62 | S&F 15mm dia fancy type, Chromium plated Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 63 | M&L for making connection of GI/Steel distribution branch with GI/Steel main of 25 to 32mm nominal bore by providing alterations or additions and fixing tee, including cutting and threading the pipe, necessarily done in position without taking down etc complete all as specified and as directed. |
| 64 | S&F GI tubing medium grade with all new connections and fittings such as tees, bends, elbows, short pieces, connector back nuts, diminishing pieces, caps, plugs unions etc fixed complete to walls and ceiling or laid in floors for 25 mm bore pipes complete all as specified and as directed |
| 65 | S&F gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe fixed of 25 mm dia complete all as specified and directed |
| 66 | S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm bore dia iron pipe and fixed (minimum wt 455 gms/each) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender