Tender For Repair To Drains (Rcc/Brick),Drain Cover ,Cover Slab & Other Misc B/R Works In Otm Accn At Af Stn Jammu Under Ge (Af) Jammu
Tender Value
30 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
17 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Drains (Rcc/Brick),Drain Cover ,Cover Slab & Other Misc B/R Works In Otm Accn At Af Stn Jammu Under Ge (Af) Jammu
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6, complete, including filling the joints externally & internally as work proceeds, filling the earth behind the walls necessary formwork including demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars complete all as specified and directed by Engr-in-charge.Note : Including removal demolished/excavated material out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractot against the same. |
| 2 | All as per description of serial item No 2 above but except bricks.complete all as specified and directed by Engr-in-charge. |
| 3 | Taking down cement plaster of existing wall/ceiling in any thickness including racking out joint hacking for key scrubing down with water etc complete all as specified Including removal demolished/excavated material out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractot against the same. |
| 4 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 5 | Demolition of cement concrete in ground floors and paving (un reinforced) including Tiles Pavings blocks if any n exc. 15 cm. thicknesses, below or above ground level,complete all as specified and directed by Engr-in-charge.Note : Including removal demolished/excavated material out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractot against the same. |
| 6 | M&L for 100mm thick PCC 1:2:4 type B-1(Using 20 mm graded crushed stone aggregate) as in floor,hard standing surfaces finished even and smooth without using extra cement laid in alternate panel including use and waste of formwwork fair or rounding or chamfered of exposed edges complete all as specified and directed by Engr-in-charge. |
| 7 | M&L for PCC 1:4:8 type D-2(40 mm graded stone agg) as Foundation, Filling, mass concrete , bed of drains, base concrete etc complete all as specified and directed by Engr-in-charge. |
| 8 | M&L for PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, coping, cills, steps, kneelers, bed plates, apex stones kerbs and similar work including necessary form work complete all as specified and directed by Engr-in-charge. |
| 9 | M&L for PCC 1:3:6 type C-2 (40 mm graded stone agg) as in surface channels and drains.complete including finished even & smooth to inner sides of surface channels with cement slurry complete all as specified and directed by Engr-in-charge. |
| 10 | Demolition of cement concrete in ground floors and paving ( reinforced) n exc. 15 cm. thicknesses, below or above ground level, complete all as specified and directed by Engr-in-charge.Note : Including removal demolished/excavated material out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractot against the same. |
| 11 | S&F for factory made Precast RCC Drain cover 100 mm thickness ( M-30 Grade) laid and jointed complete with collars bore of same precast drain ,fixed with joint material as per proper follow manufacturer instruction cost of used complete all as specifiedand as directed by Engr-In-Charge. Drain size will be as per instruction of Engr in Charge.Note : Placing of Precast reinforced concrete drain will be trough proper maintened gradient/slope due to which the water flow should be at its minimum flow. Department shall not make any claim to the contractor for scaffolding or any other equipment including required necessary excavation including cost of TMT bars of 12 mm dia 150 c/c both ways, PCC 1:4:8 type D-2 100 mm thickness of bedding of precast drains complete inner girth of drain will be increased for payment purposes except drain cover. |
| 12 | M&L for RCC 1:2:4 type B-1 (20 mm graded stone agg) as in slabs, similar suspended work including necessary form work etc complete all as specified and directed by Engr-in-charge. |
| 13 | M&L for factory made Precast RCC (M-30) cover slab fo man holes etc including form work and including TMT bars of minimum 10 mm dia @ 150 mm c/c complete all as specified and directed by Engr-in-charge. |
| 14 | M&L for TMT steel bars 10mm dia and over cut to length bent to shape required including crancking bending spirally for hooping to columns hooking ends and binding with mild steel wire (annealed) n. less than 0.90mm dia complete all as specified and directed by Engr-in-charge. |
| 15 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; including dismantling existing unservicable floor tiles of any description including bedding/screed layer all as specified and directed by Eng-in charge.Note:- Before execution of above mentioned item it is compulsary to make good the existing surface of PCC so that paver block could be fixed properly and no extra cost will be bourne by department. |
| 16 | M&L for Providing and laying at or near ground level factory made kerb stone (any size as approved by AGE/GE) of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Eng-in charge |
| 17 | Dismantling of posts or struts (wood, Steel or RCC) any section, including taking out embedded portion and making good distrubed ground etc complete all as specified and directed by Engr-in-charge.Notes:-Demolished material except items considered sch of credit should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area.Also no extra cost shall be paid to the contractor by department. |
| 18 | S&F MS work as in Post and Struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolts or riveting etc and similar work.complete all as specified and directed by Engr-in-charge. |
| 19 | Dismentling of wrought iron,mild steel work such as agle iron,flate and similar type work or any description not otherwise provided complete all as specified and directed by Engr-in-charge. |
| 20 | M&L Mild Steel sections confirming to FE-410-W as in Framed work as in doors, gates of angles or other section with gusset plates, rails etc including necessary cutting, drilling, welding etc complete all as per directed by Engr- in charge and any type of ornament pattern and design as approved by GE.Note:-1.Contractor shall not have any claim in respect of design/Ornamental shape/designer member,the differnece of rate and amount of desinger pattern will not be paid by Department. |
| 21 | S&F in repair galvanised 2nd stand steel wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins etc complete all as specified and directed by Engr-in-charge. |
| 22 | S&F in repair 4mm dia galvanised steel wire chain link fencing size 75x75mm mesh including line wires any mesh size and type to any type or standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed by Engr-in-charge. |
| 23 | S&F in repair concertina coil fencing with punch tape concertina coil 650mm dia, strached to 6.0 meter length, having 50 nos sprial turns per 6.0 meter length, spring core wire (2.59mm thick) of high rensile strength of 1620 N/sqm with tape (0.52mm thick) hot dip galvanised upto 20 micros and weight of each coil 10 to 12 Kg and fixing the same on Y shaped angle iron 8 horizontal R.B.T ( Reinforced barbed tape ) stud tied with GI staple sand GI clips to retain horizontal clips shall be @5 Nos per 2 sprial turns approximate 125 clips per coil including necessary bolts cinokete aklk and removing complete all as specified and directed by Engr-in-charge.Note: for measurement purpose overall lenght of the wire shall be measured the get approved by AGE before procurment.NOTE :- Weight of concertina coil shall be measured as per Board order by GE. |
| 24 | M&L for Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engr-in-charge. |
| 25 | M&L for Preparation of new plastered surfaces and applying two coats of exterior emulsion paint on walls including a thin layer of wall care putty,necessary formwork scaffolding required upto the 4th story complete all as specified and directed by Engr-in-charge. |
| 26 | S&F Pre-painted galvalume aluminium zinc coated corrugated sheet (including pre-laminated guard film) 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of asbestos cement sheets, corrugated or semi corrugated etc in roof covering.complete all as specified and directed by Engr-in-charge.Notes:-Demolished material should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area.Also no extra cost shall be paid to the contractor by department. |
| 27 | S&F 08 mm thick Poly-Carbonate UV protected hollow sheet with side lap fixed with coach screw and washer in roof, wall etc, fixed with self tapping screws including dismantling of asbestos cement sheets, corrugated or semi corrugated etc in roof covering.complete all as specified and directed by Engr-in-charge.Notes:-Demolished material should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area.Also no extra cost shall be paid to the contractor by department. |
| 28 | Excavation in trenches in any type of soil n.exc 1.5m wide and n.exc 1.5m depth in foundations etc for manholes, sewage line and and getting out complete all as specified and directed by Engr-in-charge. |
| 29 | Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-charge. |
| 30 | M&L for cleaning/clearing manually or mechanically the drain/culverts of any description and any size at any depth , removing any type of blockage including desludging , descaling & dechocking by using sewage cleaning rods or with combine hydraulic operated sewer suction cum jetting machine mounted on LCV/HCV by using high pressure thermo plastic water jetting hose and through conical round shaped nozzle with piston action rodding from culvert to culvert or from culvert to septic tank / well through drain line when as required time to time including taking of drain cover and cleaning of drain/culvert of any size and depth and removing waste material/sludge to a distance of n.exc 50m and burrying the same pit and replacing drain cover in position after cleaning all as directed by Engr-in-Charge. |
| 31 | M&L for bailing out water directely from drain/culvert of any size and any depth with suitable capacity pumps/suction machine to a distance not less than 50 metre away in such a manner as to disposal of water, not to cause inconvenience /nuisance in the area or to cause damage to the property structures near by all as specified and directed by Engr-in-Charge.(All works to be carried out under foul conditions). |
| 32 | SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender