Tender For Lift Irrigation Scheme Harwan. (Amount Of Work:- Rs 359.40 Lacs)
Tender Value
3.59 Crore
Estimated cost
Bid Submission
11 Sep 2026
0 days left
EMD
7.19 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lift Irrigation Scheme Harwan. (Amount Of Work:- Rs 359.40 Lacs)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Aug-2026 | Corrigendum | Other | 11-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing and commissioning of Horizontal shaft centrifugal pump coupled with AC induction squirrel cage prime mover as per following specifications:PUMP: -Make: Kirloskar/ M&P/Wpil/ Equivalent as approved in EOI of SE Mech. Circle KashmirType: Horizontal shaft, single or double suction split casing type single or double voluteDischarge: 10 Cusec/1020m3/hrTotal dynamic head: 32mLiquid to be handled: Raw waterNPSHA: 3.63mSealing arrangement: Gland packedPump efficiency at duty point: Not less than 80% at duty pointSpeed: 980 RPMDiameter of suction: As recommended by manufacturerDiameter of Delivery: As recommended by manufacturerType of impeller: Closed/semi openMaterial of Impeller: ASTM351/CF-8MMaterial of Pump Shaft: AISI SS 410 ( accurately machined protected by sleeve in gland)Material of Shaft Sleeve : SS 410Material of Impeller Nut/Lock Nut: SS 410Type of bearing: Oil/grease lubricated Material of Pump casing: C.I Material of Pump Gland: BronzeElevation above M.S.L: 1585mCoupling: Flexible M.S. tyre type coupling bored accurately and keyed to shafts designed for load.Base frame: M.S fabricated sturdy for mounting above pump and motor designed for required load.Foundation: L&J type bolts to be grouted in cement concrete block in M20 mix.Spare parts: Tyre coupling Rubber washer for coupling (02 No.)Note: The suction pipe to be used at site is 400mm NB.MOTOR:-Model type: AC Squirrel cage induction motor.Rating: Not less than 170 HPSpeed: 980 RPMPower supply: 415± 10% Volts, 3-phase.Frequency: 50± 3% Hz.Class of insulation: F or aboveType of enclosure: TEFCIP Rating: 55.Duty type: S1Motor efficiency: IE2Mounting type: FootMake: ABB/Kirlosker/Crompton &Greaves/Equivalent as approved in EOI of SE Mech. Circle KashmirManufacturer’s test certificate is mandatory and Third Party Inspection is mandatory. |
| 2 | Providing, fabrication of suction system and delivery manifold by way of fitting of:i. Supply installation testing and commissioning of DN 450mm, DI Reflux Non-return Valve PN 1.6 (02 No.) conforming to IS-5312 with latest amendments or equivalent international standards to following a) Body: Ductile Ironb) Cover : Ductile Iron c) Disc : Ductile Iron Coated with EPDM rubberd) Seat ring: Bronze/ SS e) Surface Protection: Electro static epoxy powder coating.Make: VAG/AVK/TALIS/ Equivalent as approved in EOI of SE Mech. Circle Kashmir. The manufacture’s test certificate and Third party inspection are mandatory.The job includes fabrication of By-pass arrangement for 450 mm dia NRV (02 No.) as under: -• Creating hole of dia 50 mm dia using gas cutter.• Providing and fitting of 50 mm dia GI pipe of required length along with 02 No. of elbows of reputed make.• Providing and fitting of 01 no. brass/GM ball valve 50 mm of reputed make ii. Supply installation and testing of DN 450, PN 1.6 sluice valves (02 No.) conforming to IS 14846 with latest amendments or equivalent international standard to following specification: -Material of construction: -a) Body, Bonnet : Ductile iron b) Wedge : Ductile iron c) Spindle/Stem : St Steel d) Stem nut : Bronze/SS/Brasse) Bonnet Gasket : Neoprene/EPDM rubberf) Make: VAG/AVK/TALIS/Equivalent as approved in EOI of SE Mech. Circle Kashmir. The manufacture’s test certificate and Third party inspection are mandatory.Specification of mating flange: The flanges required for fitting of NRVS and sluice valves shall be in conformity with the flanges of the valves. The flanges shall not be less than 25mm thick. iii. 400mm dia, 5mm thick Pipe (20m)iv. 400mm dia Long radius bends: 2 No. v. 450mm dia Long radius bends: 2 Novi. 400mm Flanges 25mm thick: 20 No. (Including flanges for NRV and sluice valve fitting.)vii. 450mm Flanges 25mm thick: 14 No. (Including flanges for NRV and sluice valve fitting.)viii. 450mm dia M.S pipe, 5mm thick: 10mix. Gaskets EPDM: 24 No.x. Nut bolts: 75Kg xi. Leak proof solution: xii. Paint and metallic primer: xiii. Providing, fitting, testing and commissioning of M.S foot valve of 400mm dia (02 No.) fabricated out of M.S plate, square bars etc by required mechanical operations viz., cutting, bending, tapering, shaping, welding and finishing.Body: 400mm dia fabricated out of M.S plate of thickness not less than 5mmFlap/Weight plate: fabricated out of M.S plate of thickness 12mm along with leather washer/ rubber highly water resistant and M.S bottom disc plate complete with proper fitting arrangement.Hinge: fabricated out of M.S plate of thickness not less than 16mm with required hinge pin and rocker arm/lever arrangement.Seat: fabricated out of square bar not less than 20mm thick with proper finishing and buffing.Strainer: fabricated out of 10mm thick square bars complete.Top flange: 400mm dia not less than 25mm thick (Bottom flanges/ plate: not less than 25mm thick (02 No.).Coating: The foot valve body should be completely coated with anti-corrosive paint.The foot valve should be complete leak proof. The equipment should be installed and tested at site complete. The job includes fabrication of reducer/increaser as per suction and delivery.All the control valves (NRV and regulating valve) shall be of make Kirloskar/AVK/VAG/TALIS/ Equivalent as approved in EOI of SE Mech. Circle KashmirTest certificate of the Manufacturer to be provided. |
| 3 | Providing, fabrication and fitting of steel structural working platform for suction system out of rolled steel beams, channels, angle and chequered plates by required mechanical operations. The job includes providing and applying of metallic paint and primer.i. Horizontal beams ISMB 150: 3 No. x 5.5m = 16.5m @15kg/m = 248 Kgii. Brackets and long beams out of ISMC 100:3 No. x 3.5m = 10.5m3 No. x 6.4m = 19.2m2 No. x 2m = 4mTotal = 33.7m @ 9.21kg/m = 310 Kgiii. ISA 50 × 50 × 6: 2 m x 5 No. = 10 m @ 4.5kg/m = 45kgiv. Chequered plate: 6mm6.4m x 2m = 12.8 sqm @ 49kg/m = 627 KgTotal weight = 1230 Kg |
| 4 | Providing, fitting, testing of air release valve 50mm dia with required fittings viz., 50mm dia pipe (01m, 6mm thick) to be fitted with required welding, for rising main as per directions of incharge engineer. Make: Kirlosker/AVK/VAG/TALIS/ Equivalent. Test certificate of the Manufacturer to be provided. |
| 5 | Rising Main: Providing, Laying, fitting and testing of Mild Steel Pipe of 450mm NB, bevelled ended type, anticorrosive, electric resistant welded for supply of Raw water from Lift Irrigation Scheme Harwan with following specifications: Nominal bore. = 450mmWall thickness = 5 mmType of welding = ERW Grade = Fe410Length of each pipe = 6mPackage = Plastic caps on Bevelled ends.Pipe to be manufactured as per IS-3589 with latest amendmentsThe Pipes shall be laid and connected end to end by required welding using superior quality Electrodes of Ador/ Essab and the weld shall be of smooth finish and free from defects. The pipes shall be painted in two coats of anticorrosive bituminous paint. The job also includes providing and fitting of 450mm dia long radius bends (05 No.), offsets as per site requirement and exit flap fabricated out of 16mm thick plate with required hinge and rocker arm with locking arrangement. The pipe to be tested for required hydrostatic pressure. All tools and tackles for laying and fitting of pipe shall be arranged by the firm. Note: The job excludes earthwork and backfilling.Make: Tata/Jindal/Suryaprakash/Equivalent as approved in EOI of SE Mech. Circle Kashmir. Pipe Manufacturers test certificate to be appended and third party inspection is mandatory. |
| 6 | LT Distribution PanelFabrication providing, fitting, testing and commissioning of Modular Control panel of appropriate size fabricated out of 16 SWG sheet having required openings/vents and protection class: IP 54. The panel shall be fabricated out of CRCA sheets and shall be free standing, floor mounted on M.S stand (height of stand not less than 450mm), for indoor use with front hinged doors, removable bottom glands for incoming and outgoing cables, three phase 400A copper bus bars complete with connections, internally wired for operation on 3 Phase AC supply 415±10% and frequency 50±3 Hz duly powder coated. The details and specifications are as under: -The Main components of the Modular Panel include: • Incoming Feeder: One No of incoming feeder housing 1 No 4 Pole 400 A MCCB with a breaking capacity of 50 Ka with adjustable Magneto thermal overload protection with release range of 320– 400A. The MCCB shall be provided with spreaders to maintain a gap between the phases. The front of the panel shall have the following flush type Meters mounted on it.a) 01 No. 3- phase digital amperemeter with required CT coils.b) 01 set of 3 No of indicating Neon bulbs.c) 01 No. 3- phase digital Voltmeter.d) 01 No digital frequency meter.• Outgoing Feeder: Two No. of outgoing feeders housing 2 No., 3 Pole 400 A MCCBs with breaking capacity of 50 Ka and Magneto thermal overload protection with release range of 320-400A. All MCCBs shall be provided with spreaders to maintain a gap between the phases. The front of each of the outgoing feeders shall have the following flush type Meters mounted on it.e) 01 No. 3- phase digital amperemeter with required CT coils.f) 01 set of 3 No of indicating Neon bulbs.g) 01 No. 3- phase digital Voltmeter. • Auxiliary Feeder: One No. Auxiliary Feeder housing 01 No 4-Pole 100Amp MCCB with breaking capacity of 36 KA and thermal release and Copper bas bar arrangement of adequate rating for Priming pump, Lighting and other auxiliary requirements of the pump house. The LT Panel shall be provided with at least 02 No earthing terminals for connecting to the Main Earthing circuit and shall have complete control wiring. Make of items involved in the panel shall be: L&T/Scheneider/Siemens/Equivalent as approved in EOI of SE Mech. Circle Kashmir.The equipment shall be provided with manufacturer’s test certificate. |
| 7 | FASD Starter:Providing, fitting installation testing and commissioning of Fully Automatic Star Delta Starter 3-phase, 415V pumping unit with following specifications.a) Distribution bus bar = Electric grade Copper with red, blue and yellow tapping of adequate section Rating = 400 Ampb) Contactors Contactors Make = L & T/Siemens/ Schneider/Equivalent as approved in EOI of SE Mech. Circle KashmirLine Contactor Rating (AC3) = Not less than 400AmpsDelta Contactor Rating (AC3) = Not less than 400 AmpsStar Contactor Rating (AC3) = Not less than 300 Amps Qty= 1 No. eachSuitable gap should be maintained between the contactors.c) Thermal overload relay = of Suitable amperage. Make: L&T/Rishabh/Equivalent as approved in EOI of SE Mech. Circle Kashmir Qty: 01 No.d) Ampere Meter Size = 96 mm Sq Make = L & T/ Rishabh/Equivalent as approved in EOI of SE Mech. Circle Kashmir CT Coils = Requisite CT ratio CT Coils per meter = 03 Nos (Rishbh /L&T) /Equivalent as approved in EOI of SE Mech. Circle Kashmir Type = Digital Qty= 01 No.e) Voltmeter Qty=01 No. Size =96mmSq Range = 0-500 Volts Type= Digital Make= L&T / Rishabh/Equivalent as approved in EOI of SE Mech. Circle Kashmir f) Frequency Meter: Qty: 01 No. Size: 96sqmm Frequency: 50Hz+3% Make: L&T / Rishabh/Equivalent as approved in EOI of SE Mech. Circle Kashmirg) Auxillary wiring/ Distribution wiring: Complete with required size distributed smoothly and fitted neatly.h) Auxillary MCB: Of suitable capacity and amperage (03 No.)i) Push buttons: ON,OFF switches of red and green coloursj) Timer: Timer assembly having suitable time range of Make: L&T / Seimens/Schneiderk) Single phase preventer: 01 No. of Make: L&T/Minilac/ Siemens/Schneider.l) Housing: Cubical fabricated out of 16 SWG M.S sheet having required openings/vents for cables. The housing shall have to be cut out spaces for meters and ON,OFF buttons. The enclosure shall be of excellent fit and finish, corrosion resistant duly painted and powder coated gliding hinges for smooth and noiseless movement. Also includes providing and fitting of suitable M.S stand.The equipment shall be provided with manufacturer’s test certificate. |
| 8 | Providing, fitting, installation, testing and commissioning of 300kvA voltage controller/stabilizer as per specifications below:Type of voltage controller: Manually operated copper wound, 3-phase, AC power supply multi step.Type of regulator: Double plate type with electrolytic copper contacts (450mm ×450mm).Tape changer: 8 StepsInput voltage: 180-415 volts.Output voltage: 415 + 10 % volts.Frequency: 50 + 3 C/SWindings: Electrolytic grade copper of adequate section, vacuum impregnated and Oven-dried.Insulation: Fiber glass insulations to tested parameters.Cooling: Naturally, Oil cooledTemp. Rise (Max.): 30 degree Celsius above ambientMounting: On Uni-directional wheelsCorrection rate: 30 volts per stepWave form distortion: virtually nilDuty cycle: 100% continuousEnclosure: 14 SWG MS sheet enclosure in pressed CGR Sheet powder coated with radiators.Core laminates: High grade, low eddy loss, grain oriented silicon steel laminations.Load: Three phase induction motor load.Load Amperes (continuous)Rating: 300 KVAOverload in 24-hours operation: 10% above continuous Ampere rating.The voltage stabilizer shall have T-oil level indicator gauge preferably glass type tube or otherwise visible to naked eye. The top of the container to have a display panel for housing 02 numbers Digital voltmeters (0-500V) of L&T/Rishab/Scheineder/Equivalent as approved in EOI of SE Mech. Circle Kashmir make along with 4-way selector switch and set of neon indicators of L&T make for incoming and outgoing phases (06 No.’s)Insulating media (T. oil) of 11kVA grade to be provided and filled up to top level, with dielectric strength of 5Kv at 4m air gap. The T-oil of specific grade should be provided in separate barrels and filled at site upto top level. The equipment shall be provided with manufacturer’s test certificate. |
| 9 | Providing, fitting, laying, testing and commissioning of 1.1KV XLPE insulated 3.5 Core Al armoured 500 mm2 power cable to be used as Main Service Line shall be as per relevant IS 7098-1, for connection from HT transformer up to the panel. The job also includes providing & fitting of bimetallic thimbles (03 No.). and Al thimbles (03 No.) as per required size and amperage, including crimping and termination of ends with Hydraulic tool. The cable has to be fitted on the walls by required clamps. Make: Polycab/Gloster/Havells/Equivalent as approved in EOI of SE Mech. Circle Kashmir |
| 10 | Providing, fitting, laying, testing and commissioning of XLPE insulated 1.1 KV, armoured 3 core 150mm2 insulated copper multi-stranded cable as per relevant IS 7098-1 for connecting motors with panel. The cable shall be laid through PVC conduits of size 100mm. The job also includes providing & fitting of copper thimbles as per required size and amperage, including crimping and termination of ends with Hydraulic tool Make: Polycab/Gloster/Havells/Equivalent as approved in EOI of SE Mech. Circle Kashmir |
| 11 | Providing, fitting, laying, testing and commissioning of 1.1 KV, 1 core 240mm2 insulated copper multi-stranded flexible cable as per relevant IS 694 for interconnecting stabilizers, starters and distribution panel. The cable shall be laid through PVC conduits of size 80mm dia. The job also includes providing & fitting of copper thimbles as per required size and amperage, including crimping and termination of ends with Hydraulic tool Make: Polycab/Gloster/Havells/Equivalent as approved in EOI of SE Mech. Circle Kashmir |
| 12 | Illumination of pump premises by way of Providing, installation, testing and commissioning of street light 120 Watt LED (Street Light Type) having following specs: Input: 90-240 V 50 HzPower Factor: >0.9Colour Temperature: 4K - 6.5K Beam Angle: 120˚ - 170˚ Lumens: >12000Operating Temperature: -20˚C to 60˚CQuantity: 06 NoMake: Havells/Syska/Phillips/Surya/Equivalent as approved in EOI of SE Mech. Circle KashmirThe LED lights are to be pressure die cast Aluminum housing with power coated finish and having Ingress Protection up to IP-65/66.The LED is to be properly fitted and connected to the cable. The job includes Providing and installation of Junction Box with DP 16A MCBs to each LED light. Providing, laying and Fitting of 2-Core, 10 Sq mm XLPE, 1.1KV Armored Aluminum Cable (100m) conforming to IS: 7098 part 1st for connecting LED lights. The job also includes necessary copper lugs, crimping, taping etc. The supply has to be provided from auxiliary MCCB of distribution panel to each junction box. |
| 13 | Illumination of pump house by way of providing and fitting of eight No. of lighting points and four No. of heating points inside pump house and operator’s room. The lighting point comprises of providing and fitting of switch socket, angle holders, LED bulbs of 14W (08 nos.), distribution wire of 1.5 sqmm copper multistranded laid through PVC channels fixed on walls by way of required nails, rawal plugs, M.S/PVC distribution switches of required size complete in all respects and other required accessories. The four No.s of heating points shall comprise of S-S combine 3-way 2 Nos 16A and 2 No.s of 6A, distribution wire of 4 sqmm copper multistranded distributed through PVC channels neatly and smoothly. The job also includes providing and fitting of cooling fan and exhaust fan (01 No. each) inside operator’s room and pump house respectively. |
| 14 | Providing/installation/testing and commissioning of horizontal mono block pumping unit single phase for priming system with all fittings complete. The details here are:Type: Mono block single phaseDischarge: 02 lpsHead: Range 7 to 10 mSpeed: 2900rpmQuality of water: RawMotor rating: corresponding to head and discharge. Make: Crompton/Kirlosker/Equivalent as approved in EOI of SE Mech. Circle Kashmir.The job includes providing and fitting of 40mm GI pipe 30 mtrs along with all pipe fittings, pipe specials viz., elbows, unions, tees, etc. for fabricating priming system to both the horizontal pumps. The job also includes ball valve of size- 40mm dia of heavy duty brass 5 No. for the same. The priming system shall be fabricated as per site requirement. The job also includes 2.5mm sq copper multistranded wire (10m). |
| 15 | Construction and creation of substation along with transmission line by way of providing and fitting of following items:A.) Supply, installation, testing and commissioning of outdoor type 3-phase oil immersed 11kv/433V 50Hz copper wound HT distribution transformer of rating 400kvA Level 1 (Level 2 pre amendment of IS 1180 of 2014 with latest amendments.( with Third Party Inspection)B.) construction of sub-station includes:i. HT pole Steel Tubular 9m SP33: 02 No.Earthwork: 1.14cumConcrete bottoming: 01 cum Erection of poles: 2 No.Painting of poles: 2 No.ii. GI channels, GI clamps, GI nut bolts etc: 182Kg iii. 11kv G.O.D. (Hotdip GO SWITCH) : 01 setiv.11kv Lightning arrester post type: 01 setv. 11 kv Drop out: 01 setvi. 11kv 5KN polymer Insulators 3 No vii. Paint to substation: viii. Earthing of G.O.D., HT transformer body etc, chemical earthing and 25 mm×4mm strips: 5 No. ix. Danger plates big size: 2 No.xi. Anti climbing device: 2 Noxii. ACSR conductor 0.05: 30mxiii. Prodigy meter: 01 No.The job includes all types of carriages upto site. Inspection of the substation is mandatory by PDD. |
| 16 | Construction of steel structure platform along with gantry for 400 kvA HT transformer by way of providing, fabrication and fitting of rolled steel beams, rolled steel channels, plates and pipes. i. Vertical posts ISMB 200: 2×6m= 291kg ii. . ISMB-200 beam: 4m ×24.2kg/m = 96.8kg iii. Platform fabricated out of ISMC 100, both horizontal and vertical including brackets:Vt posts 100mm dia, 5mm M.S pipe: 8 ft ×8 No. = 64rft =19.5m @12Kg/m = 234 KgHz pieces ISMC 100: 8 ft × 16 No. = 128rft = 39m @9.21Kg/m = 359 Kgiv. M.S Base plates of 6mm thick: 16 No. × 150mm ×150mm = 0.36sqm @ 46.7Kg/sqm= 17 Kg 6 No. × 12mm ×250mm ×250mm = 0.375sqm @96Kg/sqm= 36 Kgv. Applying of redoxide and metallic Paint to gantry and platform: |
| 17 | Earthwork/excavation of trenches by manual means. |
| 18 | Providing and laying of cement concrete block in M15 mix with 20mm stone aggregates including all carriage upto site. |
| 19 | Providing, fitting, testing and commissioning of 400A 4-pole MCCB with breaking capacity 50kA, thermal magnetic range 320-400A including suitable spreaders housed in a M.S powder coated enclosure for HT distribution transformer. |
| 20 | Providing and fitting of 5-Ton capacity robust type Chain Pulley block having minimum chain length of 6mtrs. The chain pulley block shall be of Indef/equivalent make. Manufacturers test certificate shall be provided at the time of supply of equipment. |
| 21 | Providing, laying and fixing of shock proof mats with adhesive bonds material on the floor of pump house covering area around the electromechanical machinery for safeguarding the life of workmen. The mats shall be fixed after cleaning the surface. The mattes shall be as per IS 15652:2006 and shall have the following specifications:Composition: Rubber synthetic mats for electrical purposeThickness: 2mmWidth: 1mThe rubber mats shall be accepted with the manufacturer’s test certificate. |
| 22 | Providing of tool kit/set housed in a steel box.i. Hammer 1 kg- 1 No.ii. Plier insulated with a thick sleeve. 2 No.iii. Double ended ring spanners (chrome plated) of size from 06 to 32mm.iv. Double ended D. spanners chrome plated of size from 06 to 32mm.v. Long screw driver insulated. 2 No.vi. Electric multimeter. 1 No.vii. Digital clamp tester capable of measure upto 500 Amp. 01 No.viii. Pipe wrench of size 600mm and 450mm. 1 No. each.ix. L- key set: 01 No.The above too set shall be of Taparia/Geelani/equivalent make completely and with tool box. |
| 23 | Providing and fabrication of steel structure bed of size 3′×6′ fabricated out of ISA 40×40×6 m. The job includes providing and fixing of ply board of 19mm thick of size 3′×6′ to steel structure bed frame. The job also includes applying of primer coat and synthetic enamel paint to ply board and steel structure bed as per the instructions of the engineer incharge. |
| 24 | Providing, installation, testing and commissioning of 1000va power inverter with backup battery of 200Ah. Make: Exide/Luminous/Equivalent as approved in EOI of SE Mech. Circle Kashmir |
| 25 | Providing of search light (heavy duty torch 01 No.), room heater (01 No.), induction heater (01 No.), PVC chairs (02 No.), link rod (01 No.), HT gloves (01 set) and bamboo ladder of length 20ft (01 No.). |
| 26 | A. Design, construction, fabrication and providing of 5MT EOT of following specifications:Make: Reputed• Type of crane: Single Girder Type• Class of duty: 2nd, Heavy duty• Location: Outdoor• Main Hoisting Capacity: 5.0 Ton• Span ( C to C of Rail Line): 6.0 meters Approx• Height of Lift: 12.0 meters• Crane Standard Refered : Confirm to IS:3177, 807 & 800• Drive Individual• Operation through Pendent Push Button from floor• Type of Pendent 6 way• Construction of Main Girder ISMB-400x140• Type of Buffer Rubber Type• Construction of End Carriages MS Plate & Channel fabricated type having Open Gear Type Wheel Assembly• LT Wheel Diameter Diameter 200mm• LT Wheel Material EN-9 Forged• CT Wheel Diameter Diameter 150mm• CT Wheel Material EN-9Forged• Bearings • Type Heavy duty Antifrication Ball/Roller/Spherical Bearing • Make: FAG/SKL/equivalent.• Speeds Main • Main Hoisting 3-4 meters/min.• Cross Travel Motion 10-12meters/min.• Long Travel Motion 12-15meters/min. • Motors Ratings Main • Main Hoisting 5.0 HP Sq. Cage• Cross Travel Motion 0.5 HP x 2Nos Sq. Cage• Long Travel Motion 0.5HP x 2 Nos. Sq. Cage • Make of Motors : Crompton/ABB/Kirloskar/equivalent• Size of Gear Boxes Main• Main Hoisting HB-450• Cross Travel Motion Helical Geared motor• Long Travel Motion Helical Geared motor• Type totally Enclosed CI Bodies oil Lubricated.• Make Reputed • Brakes • Type–Hoist Electro Magnetic AC Disc type• Cross Travel EM AC Disc Type• Long Travel EM AC Shoe Type• Make reputed • Control Panel • Components : Contractors, Control Transformers ,O/L Relay, MCB/ HRC Fuse etc to be provided• Make of Switch gears Simen/L&T /Scheineder/equivalent• Limit Switches • Type: Rotary Type in Hoist, two way Lever Type in CT & LT • Make: Reputed • Wire Rope • No. of Fall: 4 Fall• Diameter & Type: Dia.12mm, 6 x 36 Construction, FMC • Make : Reputed • Hook • Type: \\"C\\" Type• Make: Reputed • Rope Drum: Fabricated with Seamless pipe & Plates• DSL • Type : PVC Insulated Bus Bar type• Make: Reputed • Cable: All Flexible Copper Cable shall be used• Control Voltage: 110 V• Platform: One Long platform to be provided for maintenance point of view.• Painting: one coat Red Oxide & Two Coat Golden Yellow syntaticB. Providing of rolled steel beam ISMB 300 ×140mm and square bar 40mm ×40mm for 10m rail/runway (total 20m) and clear span of 6m, including base plates fabricated out of 12mm plates required for beams, mechanical stoppers to be fixed with required mechanical operations. |
| 27 | Providing, fabrication and fitting of M.S base plates fabricated out of 12mm thick M.S plates to be fixed by required mechanical operations. 1.26sqm |
| 28 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 29 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 30 | Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material:- All kinds of soil : |
| 31 | Ist Lift |
| 32 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 33 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 34 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level; 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 35 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 36 | Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): Depth exceeding 3 m but not exceeding 4.50 m |
| 37 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. |
| 38 | Hand-packing stones in wire-crates; excluding cost of crates and stones |
| 39 | Stone boulder (nallah) nominal size 225 mm (Stack measurements reduced by 15%) |
| 40 | Supply and staking of G.I wire knitted Crates (Mesh size 4 ''x4'' ), with dia wire 4mm of approved made and make including all sorts of carriages up to the actual site of work complete in all respects to the entire satisfiction of Engineer incharge. |
| 41 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 42 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 43 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 44 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. |
| 45 | Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete |
| 46 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. |
| 47 | P/L of Stone soling including cost of stones |
| 48 | Dumping stone excluding cost of stones. In Horizontal on level |
| 49 | Supply of Stone boulder (nallah) nominal size 225 mm |
| 50 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 51 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 52 | Foundations, footings, bases of columns etc. for mass concrete. |
| 53 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 54 | Carraige of materials from souce to road site of work by Mechanical transport including cost of loading, unloading and stacking |
| 55 | Stone soling for an avg lead of 20kms |
| 56 | Stone Aggregate 40 mm for an avg lead of 20kms |
| 57 | Stone Aggregate 20 mm for an avg lead 20 kms |
| 58 | Sand for an avg lead of 15 kms |
| 59 | Cement/Steel for an avg lead of 10 kms |
| 60 | Cement/Steel for an avg lead of 04 kms Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodaySep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender