Tender For Development Of Nursery Garden At Kottangal In Tiruvannamalai City Municipal Corporation
Tender Value
8.20 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
8200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruvannamalai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Nursery Garden At Kottangal In Tiruvannamalai City Municipal Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers.- Upto 2.40m Footing Depth. |
| 2 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means |
| 3 | Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means |
| 4 | Provision for column post 50mm dia GI pipe including of all charges etc., |
| 5 | 25 x 25 x 2.5mm Sq Tube Horizontal |
| 6 | Providing shade net mesh alround (green net) including of all labour charges etc., complete 25.00m x 22.00 m |
| 7 | Supplying and fixing weld mesh |
| 8 | 75.75.27 Jungle Clearance - Scrub Jungle Clearance |
| 9 | 75.75.41 Preparation of Nursery by clearing and leveling the site for forming 10 standard beds of 10mx1m size |
| 10 | 75.75.42 Formation of germination bed of size 10m x10m x 0.30m |
| 11 | 75.75.44 Watering the germination beds twice daily with the rose can (15 days) |
| 12 | 75.75.45 Watering the germination beds once daily with the rose can (30 days) |
| 13 | 75.75.46 Good quality red earth for filling available at site in polythene bags 0.84m3 /1000 |
| 14 | 75.75.48 Preparation of soil mixture by breaking clods, sieving & mixing with fertile earth (including red soil, silt & sand etc according to requirements) and farmyard manure at the ratio 3:1 heaping at the filling site and filling in polythene bags and arranging bags in beds and pricking out the seedlings (excludingcost of earth, farmyard manure) |
| 15 | 75.75.49 Watering the container plants twice daily with rose can (water storage pits dug up within 10m -20m from beds in nursery) 15 days |
| 16 | 75.75.50 Watering the container plants once daily with rose can 30 days |
| 17 | 75.75.51 Watering the container plants once daily with rose can 60 days |
| 18 | 75.75.47 Good quality silt available at site for filling in polythene bags 0.84m3 /1000 |
| 19 | 75.75.52 Shifting the 16x30cm Poly bag container plants weeding out, grading etc., and replacement of casualities in the bags shifting not before 45 days after pricking out.once in 21 days First shift after 4S days from the date of transplanting - 8 times |
| 20 | 75.75.53 Protection mazdoor for watch and ward in the nursery and for application of manure pesticide etc., |
| 21 | 75.75.54 Removal of Vizhal grass |
| 22 | 75.18.1.0 Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete, |
| 23 | Supply of Polythene bags including cost and conveyance of all materials etc., complete |
| 24 | Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %, 50HZ+/- 5% - 1.00 HP SINGLE PHASE SUBMERSIBLE PUMPSET AS PER IS 8034/2002 WITHOUT PANEL BOARD (15 lpm x 90 Mtr.) IS. 8034/2002. |
| 25 | Supply and delivery of direct online starter confirming to IS13947 and IEC 60947-1 suitable KW rating for operation in AC/ singlePhase/ 50HZ(±5%) and 230V(±10%) including Ammeter,Voltmeter,Thermal Overload relay, 16Amps 2pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5way connector, wiring with 1sq.mm/1.5sq.mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be takenseparately). |
| 26 | Supply and delivery of 32 mm UPVC PIPE (unplasticized polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure (Schedule -80) |
| 27 | Supply and delivery of (PVC) specials |
| 28 | 32mm dia PVC Elbow |
| 29 | 32mm dia PVC Coupling |
| 30 | 20 mm dia PVC Tap |
| 31 | Supply and Delivery of 2.50 Sqmm. PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 including cost & conveyance of all material to site and all labours charges etc complete. |
| 32 | Supply and fixing of TNEB meter board suitable for 32A Single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit |
| 33 | Supply and run of 4 of 2.5 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains |
| 34 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of 1 No 7838.00 MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., |
| 35 | Supply and delivery and fixing of 1000 Lit. Capacity of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., Complete |
| 36 | Construction of Brickwall in 1:5 Cement motor for platform including cement and filling of earth with pre cast slab with painting and Lettering and RWH Arrangements |
| 37 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 38 | EB Deposit Charge |
| 39 | Sub Total |
| 40 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender