Tender For Development Of New Park At Raja Chowk In Ward No.16 (New), Faridabad.
Tender Value
50.86 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
7 days left
EMD
1.01 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridabad → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of New Park At Raja Chowk In Ward No.16 (New), Faridabad.
BOQ
| Sl. No. | Item Description |
| 1 | Installation charges all items |
| 2 | Transportation site to workshop to site |
| 3 | P/F Chest press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI-pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from roto-moulde. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. |
| 4 | P/F Seated puller is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm and 25mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used |
| 5 | P/F Sky Walker is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. The Handle frame is made of 25mm NB “B” Class GI-pipe. Foot Rod is made from 50x50 MS square pipe of 3mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. |
| 6 | P/F Air Walker is made from IS-1239 “B” Class GI-pipe. The bend pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 25mm NB “C” Class GI-pipe. The Leg frame is made of 32mm NB “B” Class GI-pipe. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, |
| 7 | P/F Horse rider is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and connecting rods is made of 25mm NB “C” Class GIpipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick. |
| 8 | P/F Leg press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick |
| 9 | P/F Push-up-Bar is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, 25mmx25mmx3mm MS angle. Closing caps are made from top quality LLDPE Material which is of 2mmthick. |
| 10 | P/F Sit-up-Board is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. Bench frame is made from 25mm NB “B” Class GI-pipe and MS Perforated Sheet of 2mm thick is welded in bench frame. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mmDia and 10mm thick |
| 11 | P/F Back Extension is made from IS-1239 “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe. The remaining frame is made of 25mm NB “B” Class GI-pipe. Barbell is made from 25mm “B” Class GI-pipe. Weight plates are made from 200mm dia solid MS plate. Closing caps are made from top quality LLDPE Material which is of 2mm thick. Machine is directly grouted in the ground.The nut Bolts used for assembly are made from SS material. |
| 12 | P/F Weight lifter is made from “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe. The remaining frame is made of 25mm NB “B” Class GI-pipe. Barbell is made from 25mm “B” Class GI-pipe. Weight plates are made from 200mm dia solid MS plate. Closing caps are made from top quality LLDPE Material which is of 2mm thick. Machine is directly grouted in the ground. The foundation pipes are embedded in CC stock and painting is done by attractive color spraying after proper surface treatment, the initial coat of primer surface is applied before top coat. The powder coating is done from Polyurethane and Epoxy Powder with 60 to 70 Micron Thickness. |
| 13 | P/F Triple Horizontal Bars are made from “B” Class GI-Pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick/or holepass made in 25x25x3 angle welded on all 4 sides of the pipe bottom. The Handle frame and connecting rods is made of 25mm NB “B” Class GI-pipe. Seat frame is made from 50mm NB “B” Class GI-Pipe. |
| 14 | P/F Rower is made from “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The Handle frame and connecting rods is made of 25mm NB “B” Class GIpipe. Seat frame is made from 50mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, 25mmx25mmx3mm MS angle. Closing caps are made from top quality LLDPE Material which is of 2mm thick. |
| 15 | P/F Cross Trainer is made from “B” Class GI-pipe. The center pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. The handle frame is made 25mm NB “B” Class GI-pipe. Foot rod is of 40mm NB “B” Class GI-pipe. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm dia and 10mm thick, 25mmx25mmx3mm MS angle. Closing caps are made from top quality LLDPE Material which is of 2mm thick. |
| 16 | Development of New Park at Raja Chowk in Ward No.16 (new), Faridabad. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender