Tender For Lis Khudpora-Providing & Fitting Of Busbars/ Cable For Interconnection Of Motors And Other Electrical Gadgets At Scheme 1 Stage 2Nd.
Tender Value
10.38 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
12 days left
EMD
20760
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lis Khudpora-Providing & Fitting Of Busbars/ Cable For Interconnection Of Motors And Other Electrical Gadgets At Scheme 1 Stage 2Nd.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Aug-2026 | terms and conditions | Other | 09-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Providing of single core unarmored, XLPE Aluminum Cable of 630sq-mm size . The cable shall be provided and fitted with suitable size aluminum thimbles /lugs ,to its terminal duly crimpled with hydraulic crimpling tool the job includes providing and fitting of other fitting material. |
| 2 | Supply, installation testing and commissioning of 400 mm DI Dual Plate Double flanged Check Valve of pressure rating PN 2.5 (VAG/ IVC/ SigmaFlow/ Tallis/ Bikaner or equivalent conforming to IS-5312 with latest amendments or equivalent international standards to followinga)Body: Ductile iron GGG40 (EN-JS-1030)b)Plate/Door : Ductile iron GGG40 (EN-JS-1030)/Cast Steelc)Shaft and Spring: Stainless SteelSurface Protection: epoxy powder coating.The job includes fabrication of By-pass arrangement as under:- Providing and fitting of 50 mm dia GI/ steelpipe of required length along with 02 No. of elbows of reputed makeProviding and fitting of 01 no. steel/brass ball valve 50 mm of reputed make |
| 3 | Providing and Fitting of 50 mm diameter air release valve. The general/ technical specifications of the valve are as following:-Single chamberBody made of Ductile iron.Required Diameter 50mmPressure Rating PN2.5Floats made of stainless steel.Providing of nuts/bolts. Fitting/installation of new air release valve with required fittings (gasket, nuts/bolts.) to rising main. The job included all necessary adjustments including cutting for proper alignment of valve.Testing and commissioning of valve on full load. |
| 4 | Providing, Fitting, Installation, Testing and Commissioning of Priming Sewage Submersible pump of 1 HP capacity Kirloskar/Crompton/KSB/Mather plate make for priming purpose of Pumping units with following specifications : a.Type ------ Sewage submersible b.Head ------ suitable for 6 Mtrs.c. Phase /Voltage ------ 1 phase , 220 +/-10% Vd. Power/RPM ------ 1 HP/2900The priming pump shall be suitable for operation under submerged conditions and shall be suitable for wide water level fluctuations taking place in suction side. The job shall include providing of PVC Flexible Pipe (10 M) of required size including fitting like ball valve, Nipples, clamps, Elbows/Bends as required for priming of the pumping units and complete installation as required. The job also includes suitable capacity compact starter and P/F of 6mm Sq. Submersible cable=10 metres |
| 5 | Manufacturing, supply, installation, testing & commissioning of 600 KVA capacity Copper wound Voltage Stabilizer, Oil cooled, manually operated suitable on working on 3 Phase AC supply for LIS Khudpora Stage 1st. The core of the stabilizer shall be contained in a box type container fabricated out of 3 mm M.S. plate. The container is painted with two coats of steel primer inside and outside followed with one coat of super enamel paint of Grey shade (spray painted) from outside. The box to be provided with suitable cooling pipes and the stabilizer shall be provided with the wheels for easy shifting of the stabilizer as and when required. Copper strips of the suitable size shall be used for winding and fiberglass insulating material is used for insulating the copper strips. The core of the stabilizer is fabricated out of 1stclass silicon 92 grade pota sheets. The stabilizer shall have suitable insulated legs of appropriate size of cable connections. The oil level indicator to be provided on stabilizer body.Voltage range Input =240-500 voltsOutput =400-440 voltsTape Charger = Manually operated balance type tap changer of 6 tapings with the Position indicator.Tape No. 1 = Step down by not more than 50 volts.Tape No. 2 = line voltage.Tape No. 3 to 6 = The taps shall be used to increase voltage in the range of 240-400 to 400-440 volts.The stabilizer is to be provided with a free standing type Control panel made out of Steel Metal dust, vermin proof and internally wired having accessories.1. 02 No. voltmeters 96 mm Sq. Dial flush pattern type 0-500—Volts each on Incoming and Outgoing circuit.2. The voltmeters with fuse and selector switch for 3 Phase.A Set of indicating lamps for 3 phases complete with fusing both in primary & secondary side.3. Red & Green indicating lamps for Off/ON display.The stabilizer shall be filled with required quantity of transformer Oil of reputed make up to the required level. All accessories and Meters is of reputed make and confirm to relevant ISI standard. Providing of nuts/bolts. Fitting/installation of new air release valve with required fittings (gasket, nuts/bolts.) to rising main. The job included all necessary adjustments including cutting for proper alignment of valve. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 12 daysSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender