Drinking Water Supply and Sanitation Government Departments Closing in 13 days TDR #57112086

Tender For Used Water Management System For Nagar Panchayat, Chandaus, District-Aligarh.

Issued by Government Departments · Aligarh, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Sep 2026
13 days left
EMD
3.79 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Aligarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Used Water Management System For Nagar Panchayat, Chandaus, District-Aligarh.

BOQ

Name of Work:- Used Water Management System For Nagar Panchayat, Chandaus, District-Aligarh.
Sl. No. Item Description
1Construction of STP-1 No. (300 KLD) for proven Technology to deliver desired effluent parameters should be BOD<10mg/l, TSS< 10mg/l, N<10mg/l, Fecal Coliform<100 & COD<50mg/l as per site requirement., coarse screen with grit chamber & construciton of Chlorine Tank capacity having 300-500 KLD including Survey, Soil Investingation if required, design and drawing, supply of all required materials, labour, T&P etc. all complete for proper completion of the work as per directon of E/I.
2Construction of STP-1 No. (700 KLD) for proven Technology to deliver desired effluent parameters should be BOD<10mg/l, TSS< 10mg/l, N<10mg/l, Fecal Coliform<100 & COD<50mg/l as per site requirement.Construction of 700 KLD STP, coarse screen with grit chamber & construciton of Chlorine Tank capacity having 700-1000 KLD including Survey, Soil Investingation if required, design and drawing, supply of all required materials, labour, T&P etc. all complete for proper completion of the work as per directon of E/I.
3Construction of Drain (0.6m x 0.6m)
4Excavation in ordinary/kankar soil in trenches with lift upto 1.5m and lead upto 50m refilling of excavated earth into trenches and removal and disposal of surplus earth with in a distance of 50m from centre of the trenches.
50.00 - 1.50 M deep
6Cement concrete with 20mm gauge approved stone ballast, Coarse sand and cement in proportion 8:4:1 including supply of all materials, labour T&P etc. required for proper completion of work below GL.
740 MM Thick 1:2:4 P.C.C. Bedding Floor with Cement , Coarse Sand and 20 mm Gauge Stone Ballast without base Concreate including supply of all materials, labour T&P etc. required for proper completion of work.
8First class brick work for side wall in 1:4 cement & coarse sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for the proper completion of the work.
912 mm thick plaster with cement and coarse sand mortar I:4 over brick work minimum thickness not to be less than 10 mm including supply of all material, labour T & P etc. required for proper completion of work.
10Inner Side
11RCC work with cement, coarse sand and 20mm gauge stone grit in proportion of 1:1½:3 (excluding cost of reinforcement and its bending) but including its fixing and binding with 0.50mm thick binding wire (to be supplied by the contractor) and necessary shuttering, supply of all materials, labour T&P etc. required for proper completion of work.
12Drain Cover
13Mild steel or iron work in plain work such as in RCC work wrought to required shape as necessary including bending for proper completion of the work including supply of the steel and wastage.
14Steel reinforcement @1% Of RCC Qty
15Construction of Leach Pit with Silt Chamber
16Excavation in ordinary/kankar soil in trenches lead upto 50m refilling of excavated earth into trenches and removal and disposal of surplus earth with in a distance of 50m from centre of the trenches.
170.00 - 1.50 M deep
18Silt Chamber
19Leah - Pit
201.50 - 3.00 M
21Leach Pit
223.0 - 4.5 M
23Leach Pit
24Cement concrete with 20mm gauge approved stone ballast, Coarse sand and cement in proportion 8:4:1 including supply of all materials, labour T&P etc. required for proper completion of work below GL.
25Silt Chamber PCC Base
26Leach Pit Base
27RCC work with cement, coarse sand and 20mm gauge stone grit in proportion of 1:1½:3 (excluding cost of reinforcement and its bending) but including its fixing and binding with 0.50mm thick binding wire (to be supplied by the contractor) and necessary shuttering, supply of all materials, labour T&P etc. required for proper completion of work.
28Silt Chamber RCC Cover
29Leach pit RCC Slab (including Removable cover)
30Mild steel or iron work in plain work such as in RCC work wrought to required shape as necessary including bending for proper completion of the work including supply of the steel and wastage.
31Steel reinforcement @1.5% Of RCC Qty
32First class brick work in 1:4 cement & coarse sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for the proper completion of the work.
33Silt Chamber
34Long Wall
35Short wall
36Leach pit
37Lower Side
38Tappered Portion
39Top Brick work
4012 mm thick plaster with cement and coarse sand mortar I:4 over brick work minimum thickness not to be less than 10 mm including supply of all material, labour T & P etc. required for proper completion of work.
41Silt Chamner
42Long Wall
43Short Wall
44Outer Wall
45Top Long Wall
46Top Short Wall
47Leach Pit
48Lower Side
49Tapperad Portion
50Top Brick Work
51Honey Comb
52Excavation for pipe line in ordinary/kankar soil in trenches with lift upto 1.5m and lead upto 50m refilling of excavated earth into trenches and removal and disposal of surplus earth with in a distance of 50m from centre of the trenches.
53110 mm Dia
5475/80 mm Dia
55Supply of U-PVC Pipes (Working Pressure 4 Kg/cm2 ) Single Socketed pipe & Specials complete.
56100/110 mm Dia
5775/80 mm Dia
58Carting of following sizes of pipes & specials from store to site of works (within 8 Kms.), lowering & fixing them into trenches and laying true to alignment including jointing, testing and cutting of pipes.
59100/110 mm Dia
6075/80 mm Dia
61Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand) including supply of all labour, material, T&P etc. for proper completion of the work.
62For Leach pit
63Co-Treatment Plant
64Collection Tank
65Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.
660.00 - 1.50 M deep
671.50 - 3.00 M deep
683.00 - 4.50 M deep
69Cement concrete PCC with 20mm gauge approved stone ballast, Coarse sand and cement in proportion 8:4:1 including supply of all materials, labour T&P etc. required for proper completion of work below GL.
70RCC work with cement, coarse sand and 20mm gauge stone grit in proportion of 1:1½:3 (excluding cost of reinforcement and its bending) but including its fixing and binding with 0.50mm thick binding wire (to be supplied by the contractor) and necessary shuttering, supply of all materials, labour T&P etc. required for proper completion of work.
71For Collection Tank
72For Base Slab
73For Roof Slab
74Less For Manhole Cover
75Mild steel or iron work in plain work such as in RCC work wrought to required shape as necessary including bending for proper completion of the work including supply of the steel and wastage.
761% of Total RCC
77Excavation for pipe line in ordinary/kankar soil in trenches with lift upto 1.5m and lead upto 50m refilling of excavated earth into trenches and removal and disposal of surplus earth with in a distance of 50m from centre of the trenches.
78110 mm dia
79Carting of following sizes of pipes & specials from store to site of works (within 8 Kms.), lowering & fixing them into trenches and laying true to alignment including jointing, testing and cutting of pipes.
80100/110 mm Dia
81Supply & fixing of U-PVC Pipes (Working Pressure 4 Kg/cm2 ) Single Socketed pipe 110 mm dia including all labour, materials, T&P etc. complete.
82110 mm Dia
83Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all labour, materials, T&P etc. complete.
84Single tee without door 110x110x110 mm
85Bend 87.5° 110 mm dia
86Anaerobic Baffaled Reactor
87Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.
880.00 - 1.50 M deep
89Excavation of the ABR
90Reciever
911.50 - 3.00 M deep
92Excavation of the ABR
93Cement concrete PCC with 20mm gauge approved stone ballast, Coarse sand and cement in proportion 8:4:1 including supply of all materials, labour T&P etc. required for proper completion of work below GL.
94Planted Drying Bed
95PCC Bed
96Reciever
97PCC Bed
98First class brick work in 1:4 cement & coarse sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for the proper completion of the work.
99Brick work (ABR)
100Long wall
101Short wall
102Brick work (Reciever)
103Long wall
104Short wall
10512 mm thick plaster with cement and coarse sand mortar I:4 over brick work minimum thickness not to be less than 10 mm including supply of all material, labour T & P etc. required for proper completion of work.
106Plastering (ABR)
107Outer wall
108Inner wall
109Plastering (Reciever)
110Outer wall
111Inner wall
11215 mm cement plaster1:3 (1 Cement :3 Coarse sand) finished with a floating coat of neat cement including supply of all material, labour T & P etc. required for proper completion of work.
113Plastering (ABR)
114Inner Long wall
115Inner Short wall
116Plastering (Reciever)
117Inner Long wall
118Inner Short wall
119R.C.C. With cement , Coarse Sand and 20 mm Stone Ballast 1:1.5:3 in For Slabs including supply of all material, labour T & P etc. required for proper completion of work.
120RCC in (ABR)
121RCC base
122Perforated slab
123Roof Slab
124RCC in (Reciever)
125RCC base
126Roof Slab
127Less For Manhole Cover
128Mild steel or iron work in plain work such as in RCC work wrought to required shape as necessary including bending for proper completion of the work including supply of the steel and wastage.
129Total Reinforcement for perforated slab (1.5% of RCC)
130Supply and stacking at site: 53 mm to 22.4 mm size stone aggregate including supply of all material, labour T & P etc. required for proper completion of work.
131Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality including supply of all material, labour T & P etc. required for proper completion of work.
132EHD - 35 Circular Shape 560 mm internal dia
133Planted Gravel Filter
134Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.
1350.00 - 1.50 M deep for the PGF
136Cement concrete with 20 mm gauge approved stone ballast, coarse snad and cement in proportion of 8:4:1
137PCC Bed
138Cement concrete PCC with 20mm gauge approved stone ballast, Coarse sand and cement in proportion 8:4:1 including supply of all materials, labour T&P etc. required for proper completion of work below GL.
139For RCC Base
140RCC Cover (R1)
141RCC Cover (R2)
142Less For Manhole Cover
143Mild steel or iron work in plain work such as in RCC work wrought to required shape as necessary including bending for proper completion of the work including supply of the steel and wastage.
1441% of Total RCC
145First class brick work in 1:4 cement & coarse sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for the proper completion of the work.
146Brick work (PGF)
147Long wall
148Short wall
149Brick work (R1)
150Long wall
151Short wall
152Brick work (R 2)
153Long wall
154Short wall
15512 mm thick plaster with cement and coarse sand mortar I:4 over brick work minimum thickness not to be less than 10 mm including supply of all material, labour T & P etc. required for proper completion of work.
156Plastering (PGF)
157Outer wall
158Plastering (R1)
159Outer wall
160inner wall
161Plastering (R 2)
162Outer wall
163inner wall
16415 mm cement plaster1:3 (1 Cement :3 Coarse sand) finished with a floating coat of neat cement including supply of all material, labour T & P etc. required for proper completion of work.
165Plastering (PGF)
166Inner Long wall
167Inner Short wall
168Plastering (R1)
169Inner Long wall
170Inner Short wall
171Plastering (Reciver 2)
172Inner Long wall
173Inner Short wall
174Excavation for pipe line in ordinary/kankar soil in trenches with lift upto 1.5m and lead upto 50m refilling of excavated earth into trenches and removal and disposal of surplus earth with in a distance of 50m from centre of the trenches.
175110 mm dia
176Carting from Store ,Laying, Jointing, Fixing & testing 100 mm Dia P.V.C. Pipes & Specials including all labour, materials, T&P etc. complete.
177100/110 mm Dia
178Supply & fixing of U-PVC Pipes (Working Pressure 4 Kg/cm2 ) Single Socketed pipe 110 mm dia including all labour, materials, T&P etc. complete.
179110 mm Dia
180Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all labour, materials, T&P etc. complete.
181Single tee without door 110x110x110 mm
182Bend 87.5° 110 mm diameter
183Supply and stacking at site: 53 mm to 22.4 mm size stone aggregate including all labour, materials, T&P etc. complete.
184Average Width (0.5+0.7)/2 = 0.60m
185Average Width (0.3+0.5)/2 = 0.40m
186Supply, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
187Supply, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
188Supply, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
189POLISHING POND
190Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.
191All kinds of soil
192Extra for levelling & neatly dressing of disposal soil completely as directed by Engineer-in-charge
193Supply, Laying, Jointing 300mm Dia. RCC NP2 Hume Pipe including supply of all material, labour, T&P etc. complete. 0.0-1.5 M
194Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement coarse sand mortar, including filling the joints with same mortar, with common burnt clay non modular bricks:
1951:6 (1cement : 6 coarse sand)
196Sludge Storage House
197Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.
198Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.
199Cement concrete PCC with 20mm gauge approved stone ballast, Coarse sand and cement in proportion 8:4:1 including supply of all materials, labour T&P etc. required for proper completion of work below GL.
200Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand).
201Long Wall (L= 3.0 m )
202ShortWall (L= 1.8 m )
203Mild steel or iron work in plain work such as in RCC work wrought to required shape as necessary including bending for proper completion of the work including supply of the steel and wastage.
204Long Side (2*[email protected])
205Short Side (2*[email protected])
20665 MM dia MS Pipe Unit weight (Mediun B- class) = 6.61 Kg/ mtr
207Purlin 40 MM dia MS Pipe Unit weight (Mediun B- class) =3.61 Kg/mtr
208For Principal Rafter 50 MM dia MS Pipe Unit weight (Mediun B- class ) =5.10 Kg/mtr
209add @ 5% For nut , bolt etc.
210Supply & Fixing Galvanised Corrugated iron roofing 0.63 mm thick including supply of all material, labour, T&P etc. complete.
211Roofing Sheet
212Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes including supply of all material, labour, T&P etc. complete.
213Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer including supply of all material, labour, T&P etc. complete.
214Planted Drying Bed
215Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.
2160.00 - 1.50 M deep
217Screen Chamber
218Reciever
2191.50 - 3.00 M deep
220Reciver
221Cement concrete PCC with 20mm gauge approved stone ballast, Coarse sand and cement in proportion 8:4:1 including supply of all materials, labour T&P etc. required for proper completion of work below GL.
222Planted Drying Bed
223PCC Bed
224Screen Chamber
225PCC Bed
226Reciever
227PCC Bed
228R.C.C. With cement , Coarse Sand and 20 mm Stone grit 1:1.5:3 in For Slabs including supply of all material, labour T & P etc. required for proper completion of work.
229For PDB
230For Screening Chamber
231For Reciever
232Material : Extra for using 20 mm size stone Aggregate instead of 40 mm Size Stone Aggregate
233Stone grit 20 mm Gauge
234Mild Steel or Iron in Plain Work
235Steel Reinforcement
2361% of Total RCC
237First class brick work in 1:4 cement & coarse sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for the proper completion of the work.
238Brick work (PDB)
239Long wall
240Short wall
241Brick work (Screen Chamber)
242Brick work (Reciver)
24312 mm thick plaster with cement and coarse sand mortar I:4 over brick work minimum thickness not to be less than 10 mm including supply of all material, labour T & P etc. required for proper completion of work.
244Plastering (PDB)
245Short wall
246Long wall
247Plastering (Screen Chamber)
248Short wall
249Long wall
250Plastering (Reciver)
251Short wall
252Long wall
25315 mm cement plaster 1:3 (1 Cement :3 Coarse sand) finished with a floating coat of neat cement including supply of all material, labour T & P etc. required for proper completion of work.
254Plastering(PDB)
255Short wall
256Long wall
257Plastering(Screen Chamber)
258Short wall
259Long wall
260Plastering(Reciver)
261Short wall
262Long wall
263Flooring all Chamber
264Supply, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
265Supply, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
266Supply, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
267Excavation for pipe line in ordinary/kankar soil in trenches with lift upto 1.5m and lead upto 50m refilling of excavated earth into trenches and removal and disposal of surplus earth with in a distance of 50m from centre of the trenches.
268110 mm dia
269Carting from Store ,Laying, Jointing, Fixing & testing 100 mm Dia P.V.C. Pipes & Specials including all labour, materials, T&P etc. complete.
270100/110 mm Dia
271Supply & fixing of U-PVC Pipes (Working Pressure 4 Kg/cm2 ) Single Socketed pipe 110 mm dia including all labour, materials, T&P etc. complete.
272110 mm Dia
273Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised PVC pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including supply of all material, labour, T&P etc. complete.
274Single tee without door 110x110x110 mm
275Bend 87.5° 110 mm dia
276Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) including supply of all material, labour, T&P etc. complete.
277Trees/Plant
278KOTA STONE FLOORING: Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including supply of all material, labour, T&P etc. complete.
27925 mm thick
280Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.).
281Screen bar @ 10 kg / sqm
282Gaurd Room
283Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.
2840.00 - 1.50 M deep
285230 mm wall (L= (2.33+3.23)X2=11.12 M
286Filling, dressing and ramming available excavated earth/Total qty of Excavated earth etc. including labour, T&P etc. complete.
287Less PCC
288Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 10 Kms. From the site of work and including watering, dressing etc. Rate to include the cost of all materials, labours T&P etc. required for proper completion of work.
289Guard Room
290Cement concrete PCC with 20mm gauge approved stone grit, Coarse sand and cement in proportion 8:4:1 including supply of all materials, labour T&P etc. required for proper completion of work below GL.
291230 mm wall foundation base
29225 mm thick damp proof course with cement,approved coarse sand & Stone grit in 1:1½:3 cement and coarse sand mortar including 5% water proofing material or as specified.
293R.C.C. work with cement, coarse sand and 20 mm gauge approved stone ballast in proportion of 1:1.5:3 in lintels of doors and windows including supply of all material, labour, T&P etc. complete.
294Lintel Band for door and Window
295R.C.C. with cement , Coarse Sand and 20 mm Stone Ballast 1:1.5:3 in For Slabs including supply of all material, labour T & P etc. required for proper completion of work.
296Mild steel or iron work in plain work such as in RCC work wrought to required shape as necessary including bending for proper completion of the work including supply of the steel and wastage.
297First class brick work in 1:4 cement & coarse sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for the proper completion of the work.
298In 230 mm thick wall
2991st footing
3002nd footing
3013rd footing
3024th footing
3035th up to plinth beam
3041st Class brick work in 1:4 with Cement & Coarse Sand (1.25 FM) mortar in super structure in one brick thick wall including supply of all materials, labour, T&P etc. required for proper completion of the work.
305230 mm wall
306Deduction for door & Window
30712 mm thick plaster with cement and coarse sand mortar 1:4 over brick work minimum thickness not to be less than 10 mm including supply of all material, labour T & P etc. required for proper completion of work.
308Internal plaster: Cement Plaster - 1: 4
309Guard Room
310Deduction
311Door- D1
312Window- W
31315mm thick plaster on rough side of single or half brick wall including supply of all material, labour T & P etc. required for proper completion of work.
3141:6 (1 Cement :6 coarse Sand)
315Extra on all item of plaster if done on ceiling.
316Pump Room
317Supply & fix 35 mm thick Teak wood fully panelled in doors shutters etc. including supply of all material, labour, T&P etc. complete.
318Door -D
319Painting or varnishing on new iron work in small areas or new wood work with one coat priming & one coat paint or varnish including supply of all material, labour, T&P etc. complete.
320D1 (Front & back)
321W (For Both Side)
322white washing one coat including supply of all material, labour, T&P etc. complete.
323Outer side
324Ceilling
325One priming & one oil distemper coat on new work including supply of all material, labour, T&P etc. complete.
326Inner plaster
32725 mm thick 1:2:4 plain cement concrete floor with cement, coarse sand and 20mm gauge approved stone grit, laid in panels, finished with 3mm thick floating coat of neat cement over 7.5cm thick base concrete consisting of cement and fine sand and first class brick ballast 40mm gauge in proportion of 1:6:12 and removing any over lapping mortar in the joints of the panels if any and giving team an uniform finish including supply of all materials, labour, T&P etc. required for proper completion of the work.
328for every coat after first coat.
329Door- D1
330Window
331Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including supply of all material, labour, T&P etc. complete.
332Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 Band K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment) including supply of all material, labour, T&P etc. complete.
333Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including supply of all material, labour, T&P etc. complete.
334Windows (1.2m*1.2m = 1.44 sqm @ 20kg/m^2
335Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer including supply of all material, labour, T&P etc. complete.
336Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). @ 3.00 kg/m
337Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with including supply of all material, labour, T&P etc. complete.
3384mm thick glass panes (1.2m*1.2m = 1.44 sqm
339Boundary Wall with Gate
340Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.
3410.00 - 1.50 M deep
342Boundary Wall
343Footing Gate Column
344Filling, dressing and raamming earth or sand or bajri or ballast or kankar or single etc. including labour, T&P etc. complete.
345@ 30 % of total Earth work
346Cement concrete PCC with 20mm gauge approved stone ballast, Coarse sand and cement in proportion 8:4:1 including supply of all materials, labour T&P etc. required for proper completion of work.
347Boundary Wall
348Footing Gate Column
349Cement concrete PCC with 20mm gauge approved stone ballast, Coarse sand and cement in proportion 4:2:1 including supply of all materials, labour T&P etc. required for proper completion of work.
350Copping PCC on Top
351Copping Boundary Wall (Side /Back ) on Top
352RCC work with cement, coarse sand and 20mm gauge stone grit in proportion of 1:1½:3 (excluding cost of reinforcement and its bending) but including its fixing and binding with 0.50mm thick binding wire (to be supplied by the contractor) and necessary shuttering, supply of all materials, labour T&P etc. required for proper completion of work.
353Foundation Base - F1
354Pedestal - C1
355Column Up to GL - C1
356Material : Extra for using 20 mm size stone Aggregate instead of 40 mm Size Stone Aggregate
357Stone Ballast 20 mm Gauge
358R.C.C. With cement , Coarse Sand and 20 mm Stone Ballast 1:1.5:3 in For Slabs including supply of all material, labour T & P etc. required for proper completion of work.
359Column GL to Top - C1
360Mild steel or iron work in plain work such as in RCC work wrought to required shape as necessary including bending for proper completion of the work including supply of the steel and wastage.
361Steel Reinforced
362First class brick work in 1:4 cement & coarse sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for the proper completion of the work.
363Boundary Wall
364In Ist Footing
365In IInd Footing
366In IIIrd Footing
367Above Footing Brick work in col.
3681st Class brick work in 1:4 with Cement & Coarse Sand sand (1.25 FM) mortar in super structure in one brick thick wall including supply of all materials, labour, T&P etc. required for proper completion of the work.
369Boundary Wall (Front)
370Above Footing Brick work in column
371Above Footing Brick work in Wall
37225 mm thick damp proof course with cement,approved coarse sand & Stone grit in 1:1½:3 cement and coarse sand mortar including 5% water proofing material or as specified.
373For Brick Pillar
374For Brick Wall
37512 mm thick plaster with cement and coarse sand mortar 1:4 over brick work minimum thickness not to be less than 10 mm including supply of all material, labour T & P etc. required for proper completion of work.
376For Brick Pillar
377For Brick Wall
378white washing one coat including supply of all material, labour, T&P etc. complete.
379Wall, Pillar etc.
380Copping
381colour washing two coat using coloring materials of buff blue, brown shade including supply of all material, labour, T&P etc. complete.
382Wall, Pillar etc.
383Copping
384Supply and fix of all materials, labour, T&P etc. required for making door shutters by M.S. sheet 18 gauge, M.S. angle 40x40x6mm size also including angle iron chaukhat with hold fast as instructed by Engineer Incharge including cement, concrete for fixing the same in the walls complete.
385MS Gate (4.5m x 1.5m), Gate guide 4.50m & Lugs etc.
386Fixing barbed wire fencing to posts including supply of all material, labour, T&P etc. complete.
387Painting or varnishing on new iron work in small areas or new wood work with one coat priming & one coat paint or varnish including supply of all material, labour, T&P etc. complete.
388Pump for Polishing Pond
389Supply, installation and commissioning of 1 HP Monoblock Pump of Kirloskar, CRI or equivalent make for pumping of water. Including civil works, fabrication work for mounting the pump, necessary plumbing / wiring as per instructions of engineer in charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57112086
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 07-09-2026
Authority
Authority Name Uttar Pradesh Jal Nigam
Work Description Tender for Used Water Management System For Nagar Panchayat, Chandaus, District-Aligarh.
Basic Detail
Tender No 867/NIVIDA/95, dated 19.08.2026
Bidding Type Tender
Location
City Aligarh
State Uttar Pradesh
Key Dates
Publish Date 20 Aug 2026
Submission Date 07 Sep 2026
Open Date 08 Sep 2026
Finance
Tender Value Ref. Documents
Tender Fee 11800
EMD 3.79 Lakhs
Exemption Not Available
Document List
2904ebec-66c2-43a4-a045-5a19224fea07.html
BOQ_2214383.xls
TenderDocument.pdf
Tendernotice_1 (56).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Sep 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 14 days

Tender Documents

Download All (ZIP) ↓
html

2904ebec-66c2-43a4-a045-5a19224fea07.html

xls

BOQ_2214383.xls

pdf

TenderDocument.pdf

pdf

Tendernotice_1 (56).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders