Tender For Providing Amenities At Group Of Temple, Al Ur, Jogulamba Gadwal Dist. For The Fy 2026-27
Tender Value
96.29 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
15 days left
EMD
2.40 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jogulamba Gadwal → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Amenities At Group Of Temple, Al Ur, Jogulamba Gadwal Dist. For The Fy 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Name of the Monument / Site: Alampur Group of temples, Alampur |
| 2 | Provision for Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in charge. |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | Provision for Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | Provision for Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers etc complete as directed by the Engineer incharge. |
| 7 | Provision for Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level |
| 8 | Provision for Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 (1 cement: 4 coarse sand) including cost, conveyance of all materials, labour charges etc., and also includes GST, and other applicable taxes if any etc. complete. |
| 9 | Provision for Plastering to the partition walls including cost, conveyance of all materials, labour charges etc., and also includes GST, and other applicable taxes if any etc. complete. |
| 10 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well-matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including including cost of the labour, and also includes GST, and other applicable taxes if any etc. complete |
| 11 | Providing and fixing the factory-made windows/ventilators it includes cost of all material, labour and conveyance and all other charges etc complete as directed by the engineer in charges |
| 12 | Providing and laying Vitrified tiles in floor (Toilet floor) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero-chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 14 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colors and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) |
| 15 | Provision for Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and color. (Two coats) |
| 16 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, color and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels |
| 17 | Provision for supply and fixing of electrical items including cost of the labour, and also includes GST, and other applicable taxes if any etc. complete Annexure – I |
| 18 | Provision for Sanitroy fittings for toilets including cost, conveyance of all materials, labour charges etc., and also includes GST, and other applicable taxes if any etc. complete Annexure – II |
| 19 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 20 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. |
| 21 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete |
| 22 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sands: 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design |
| 23 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design |
| 24 | Inside size 120x120 cm and 120 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) |
| 25 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a group of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : (8.14.1) Red sand st Red sand stone exposed face fine dressed with rough backing. (8.14.1.5) 30 mm thick |
| 26 | Provision for cost, supply and fixing of prefabricated WPC Door frame including cost, conveyance of the materials, labour charges and fixing charges etc. GST and other applicable taxes etc. complete |
| 27 | Provision for cost, supply and fixing of prefabricated WPC Door shutters including cost, conveyance of the materials, labour charges and fixing charges etc. GST and other applicable taxes etc. complete |
| 28 | Providing and fixing hand railing for Persons with Disabilities, of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer it including cost, conveyance of all materials, labour charges etc., and also includes GST, and other applicable taxes if any etc. complete |
| 29 | Providing temporary detachable ramp to the main entrance of temple using 50 mm thick well-seasoned Indian teak wood as movement platform of width 1.50 mts. with smooth ascending slope with a maximum gradient of 1 in 12 as specified BIS standards and supported by MS tubular frame work of verticals with 50X50 mm, 6 mm thick MS square bars at 1.0 mts. centre to centre supported over MS base plates of 100X100X10 mm and each and every vertical is inter connected with length wise and width wise purlins using 50X50mm, 6 mm thick MS square pipes with welded joints firmly and screwed the teak wood panels over frame work after finished the surfaces neatly and providing railing to a height of 0.90 mts. on both sides of the ramp using 2 rows on each side and bracing verticals at 1.0 mts. centre to centre with 40X40mm, 6 mm thick MS square bars including painting entire frame work with required enamel shade over a base coat of red oxide including cost of all materials, transportation, fabrication, fixing and applicable taxes. Overall length of Ramp is 28.00 mts. and width is 1.50 mts. with two landings one at junction and one at exit etc. all as per the directions of site in-charge. Level) after deductions Qty 1700.761- 450.328= 1250.433) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender