Tender For Supply & Fixing New External Windows (Gr. Floor) After Romoving Old Window At Vidhan Sabha, Lucknow.
Tender Value
84.26 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
11 days left
EMD
84300
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply & Fixing New External Windows (Gr. Floor) After Romoving Old Window At Vidhan Sabha, Lucknow.
BOQ
| Sl. No. | Item Description |
| 1 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below (DSR : 15.13.1) |
| 2 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : (DSR : 15.14.1) |
| 3 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 4 | Providing,& fixing first-class Sal wood frame (chaukhat) of approved quality, size, and section, including planning, dressing, rebating, grooving, mortise cutting, fitting, and fixing in position works, complete in all respects as per approved drawings, specifications, and directions of the Engineer-in-Charge. The rate shall include, tools, & labour required for satisfactory completion of the work |
| 5 | Providing First class teak wood window Shutters (Design 'A') as per Drawing & specification etc all as per direction of Architect In-charge. (AR) |
| 6 | Providing and fixing approved make tinted glass of specified thickness (5 mm or as specified), manufactured in accordance with relevant IS standards, cleaning and finishing complete in all respects, as per the approved shop drawings, manufacturer's specifications and the directions of the Engineer-in-Charge. |
| 7 | Providing and applying PU polish on window . This includes preparing the surfaces with IKEA base and sealing compound, followed by thorough scraping and rescraping to ensure a smooth base. The process involves sanding and applying the base coat three times before the final paint. The finish must be approved by the Architect-in-Charge. |
| 8 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR : 13.80) |
| 9 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). (DSR : 9.53) |
| 10 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :75x65x4 mm (heavy type) (DSR : 9.72.5) |
| 11 | Providing and fixing of 100mm-150MM handle of approved make, design, and material (stainless steel/brass/aluminium as specified), on doors/windows, complete in all respects. The work shall include supplying and installation of the handle with all necessary screws, fasteners, and accessories, fixed firmly in proper position as per manufacturer’s specifications and direction of the Engineer-in-Charge. The item includes drilling of holes, alignment, and making good of the surface after fixing. The rate shall include cost of all materials, labour, tools and plants, transportation, and all incidental charges required to complete the work satisfactorily. |
| 12 | Providing and fixing of 100mm-150MM tower bolt of approved make, design, and material (brass/stainless steel/iron as specified), on doors/windows, complete in all respects. The work shall include supplying and installation of the tower bolt with necessary screws, fasteners, and accessories, fixed securely in proper alignment to ensure smooth operation. The item includes marking, drilling, and making good of the surface after fixing. The rate shall include cost of all materials, labour, tools and plants, transportation, and all incidental charges required to complete the work as per specifications and instructions of the Engineer-in-Charge. |
| 13 | Disposal of Malba |
| 14 | Providing temporary protective packing/sealing to window openings with plywood after careful removal of existing windows, using approved quality plywood sheets of required thickness fixed with necessary wooden battens, supports, screws and bracings to ensure safety, weather protection, dust control and security of the heritage building during conservation/restoration works, including all labour, tools, scaffolding and removal after completion of work, complete in all respects as per direction of Engineer-in-Charge. |
| 15 | Repairs to PlasterworkRepairs to lime stone plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.m and under, including cutting the patch in proper shape, raking out joints, preparation of surface, and applying lime-surkhi plaster in approved proportion and finish to match existing heritage surface, complete with curing, finishing, disposal of rubbish/debris to dumping ground and all leads and lifts, complete in all respects as per direction of Engineer-in-Charge. (DSR : 14.1.2) |
| 16 | Providing and applying a sandstone crushing particle-based textured finish on masonry/plastered surfaces to match the existing architectural character, including preparation of the substrate, removal of loose material, repair of minor surface defects, application of compatible primer/bonding coat, and execution of textured coating using natural sandstone crushing particles of approved colour, grading, and texture. The finish shall be uniform, durable, and compatible with the heritage fabric, complete with all materials, labour, scaffolding, tools, and incidental works as per approved mock-up and directions of the Engineer-in-Charge. |
| 17 | CNC-cut wooden / wooden moulds / templates made as per approved shop drawings for stone moulding profiles. The work shall include digital drafting, CNC machining / cutting, shaping, finishing, assembly, edge treatment, for accurate moulding details. The moulds shall be dimensionally accurate, smooth finished, and suitable for use in stone fabrication and installation works, complete in all respects as directed by the Engineer-in-Charge.\\" |
| 18 | Providing and fixing designer teak wood Beading with ornamentation and carving, customized as per design specifications. The beading shall have a height ranging from 75 mm to 100 mm and a thickness of 10 mm. The installation is to be carried out frame as per the design approved by the Architect-in-Charge. |
| 19 | Interior Design and Architectural Consultancy Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender